Carbon fork - thru axle ripped out on brand new bike?
#1
Newbie
Thread Starter
Join Date: May 2020
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Carbon fork - thru axle ripped out on brand new bike?
Just took delivery of a new Diamondback Century Sport. There are a couple of defects (bent front large chainring, warped front brake rotor) but the most serious appears to be the cracks around the axle nut in the front fork.
(this fork is listed as 'Full Monocoque Carbon "CFT",')
Requesting opinions. Can anyone confirm this looks dangerous and should not be ridden? Or is it a paint issue?
The box had no shipping damage but it looks like this bike has some problems....
Will be contacting the seller (bikes direct) in the morning, but wanted any info possible.
Thank you!
I'm new and can't post links or attach pics . I uploaded the pic here:
i.imgur.com/ tV62uJg.jpg (remove the space)
(this fork is listed as 'Full Monocoque Carbon "CFT",')
Requesting opinions. Can anyone confirm this looks dangerous and should not be ridden? Or is it a paint issue?
The box had no shipping damage but it looks like this bike has some problems....
Will be contacting the seller (bikes direct) in the morning, but wanted any info possible.
Thank you!
I'm new and can't post links or attach pics . I uploaded the pic here:
i.imgur.com/ tV62uJg.jpg (remove the space)
#2
MUP World Champ
Last edited by adamhenry; 05-11-20 at 12:29 AM.
Likes For adamhenry:
#3
Senior Member
Join Date: Mar 2010
Location: Seattle, WA
Posts: 23,208
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 18883 Post(s)
Liked 10,646 Times
in
6,054 Posts
I can't tell from a photo online if that's safe to ride or just the paint, I sure wouldn't risk it though.
#4
Senior Member
Join Date: May 2010
Location: Bristol, R. I.
Posts: 4,340
Bikes: Specialized Secteur, old Peugeot
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 663 Post(s)
Liked 496 Times
in
299 Posts
I think you are right to be concerned. That area of the fork should be solid but it does not seem to be.
#5
Expired Member
Join Date: Jun 2007
Location: TN
Posts: 11,507
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3657 Post(s)
Liked 5,394 Times
in
2,739 Posts
Darn, I was expecting to see a pic of a ripped out thru axle....
Likes For shelbyfv:
#6
Senior Member
Join Date: Aug 2019
Location: Québec, Canada
Posts: 2,108
Bikes: SL8 Pro, TCR beater
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 583 Times
in
438 Posts
Just took delivery of a new Diamondback Century Sport. There are a couple of defects (bent front large chainring, warped front brake rotor) but the most serious appears to be the cracks around the axle nut in the front fork.
(this fork is listed as 'Full Monocoque Carbon "CFT",')
Requesting opinions. Can anyone confirm this looks dangerous and should not be ridden? Or is it a paint issue?
The box had no shipping damage but it looks like this bike has some problems....
Will be contacting the seller (bikes direct) in the morning, but wanted any info possible.
Thank you!
I'm new and can't post links or attach pics . I uploaded the pic here:
i.imgur.com/ tV62uJg.jpg (remove the space)
(this fork is listed as 'Full Monocoque Carbon "CFT",')
Requesting opinions. Can anyone confirm this looks dangerous and should not be ridden? Or is it a paint issue?
The box had no shipping damage but it looks like this bike has some problems....
Will be contacting the seller (bikes direct) in the morning, but wanted any info possible.
Thank you!
I'm new and can't post links or attach pics . I uploaded the pic here:
i.imgur.com/ tV62uJg.jpg (remove the space)
Was the shipping box you received the original bike's box? I don't know how Bike Directs operate, but It is possible that it was removed from its original box, handled & shipped in another box.
Last edited by eduskator; 05-11-20 at 06:25 AM.
#7
Zoom zoom zoom zoom bonk
Join Date: Sep 2006
Location: New Zealand
Posts: 4,624
Bikes: Giant Defy, Trek 1.7c, BMC GF02, Fuji Tahoe, Scott Sub 35, Kona Rove, Trek Verve+2
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 551 Post(s)
Liked 722 Times
in
366 Posts
Normally I'd say that's just crappy paint but have you tried to find a dentist recently?
#8
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,516
Bikes: R3 Disc, Haanjo
Mentioned: 354 Post(s)
Tagged: 1 Thread(s)
Quoted: 20808 Post(s)
Liked 9,450 Times
in
4,668 Posts
Likes For WhyFi:
Likes For eduskator:
#10
So it is
Join Date: Sep 2008
Location: Westminster, CO
Posts: 21,329
Bikes: Luzerne, 684, Boreas, Wheelhouse, Alize©®, Bayamo, Cayo
Mentioned: 246 Post(s)
Tagged: 1 Thread(s)
Quoted: 11393 Post(s)
Liked 4,735 Times
in
2,758 Posts
#11
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,516
Bikes: R3 Disc, Haanjo
Mentioned: 354 Post(s)
Tagged: 1 Thread(s)
Quoted: 20808 Post(s)
Liked 9,450 Times
in
4,668 Posts
It's hard for me to say. Keeping in mind that there's some extreme magnification going on here, this could just be a case of sloppy finishing between the carbon of the fork and the threaded insert. I would see if I could thread the TA through the other way, from the outside of the fork, and see if there's any wiggle.
#12
Senior Member
Join Date: Mar 2006
Location: Chicago, IL, USA
Posts: 2,873
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 1455 Post(s)
Liked 1,477 Times
in
867 Posts
I would definitely return it. Even if you could somehow definitively determine that it's just a paint issue, this (along with the other issues) seems unacceptable on a brand new bike.
Out of curiosity how would they be addressing the other issues?
Out of curiosity how would they be addressing the other issues?
#13
Senior Member
Join Date: Jul 2007
Posts: 7,569
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1851 Post(s)
Liked 678 Times
in
429 Posts
Rotors bend pretty easily. So that is not a surprise to hear.
Would have been quite a beating to bend a chainring.
What's on the fork could be cosmetic or it could be structural. As others have said, it's hard to tell. If you take the wheel out and reinsert just the TA, can you pull on the TA and feel or see it move?
Would have been quite a beating to bend a chainring.
What's on the fork could be cosmetic or it could be structural. As others have said, it's hard to tell. If you take the wheel out and reinsert just the TA, can you pull on the TA and feel or see it move?
#14
Senior Member
It looks to me like it was damaged and that is the result of a botched touch up. I would ride it if I had to but
if I had the option to return it I would especially with the other stuff going on. A chainring does not bend easily.
if I had the option to return it I would especially with the other stuff going on. A chainring does not bend easily.
#15
So it is
Join Date: Sep 2008
Location: Westminster, CO
Posts: 21,329
Bikes: Luzerne, 684, Boreas, Wheelhouse, Alize©®, Bayamo, Cayo
Mentioned: 246 Post(s)
Tagged: 1 Thread(s)
Quoted: 11393 Post(s)
Liked 4,735 Times
in
2,758 Posts
It's hard for me to say. Keeping in mind that there's some extreme magnification going on here, this could just be a case of sloppy finishing between the carbon of the fork and the threaded insert. I would see if I could thread the TA through the other way, from the outside of the fork, and see if there's any wiggle.
#16
Senior Member
Join Date: Aug 2019
Location: Québec, Canada
Posts: 2,108
Bikes: SL8 Pro, TCR beater
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 583 Times
in
438 Posts
I wasted a few minutes of my life on Bikes Direct's website and it seems like they have a satisfaction / money back guarantee. I would be curious to actually know how good (or bad) this company is with such claims.
Last edited by eduskator; 05-11-20 at 11:00 AM.
#17
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,516
Bikes: R3 Disc, Haanjo
Mentioned: 354 Post(s)
Tagged: 1 Thread(s)
Quoted: 20808 Post(s)
Liked 9,450 Times
in
4,668 Posts
Yeah, if not for the other issues, I wouldn't have noticed this myself. Taken as a whole and considering that this is the out-of-the-box condition, I'd probably request a return (or a significant discount if I could inspect it well enough to be comfortable that it's cosmetic).
#18
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18354 Post(s)
Liked 4,502 Times
in
3,346 Posts
I think this is the bike.
https://www.bikesdirect.com/products/...rance-road.htm
At $650, you're really already scraping the bottom of the barrel.
For the chainring and rotor, it really depends on the design, quality, and how bad it is.
In years past, it was considered routine for bike builders to true up parts like the cranksets, and I presume low-end rotors now.\\
That fork does bother me, as well as questions on whether it in fact has a robust enough design for hard long-term use. Does it crack like that simply by tightening down the axle?
https://www.bikesdirect.com/products/...rance-road.htm
At $650, you're really already scraping the bottom of the barrel.
For the chainring and rotor, it really depends on the design, quality, and how bad it is.
In years past, it was considered routine for bike builders to true up parts like the cranksets, and I presume low-end rotors now.\\
That fork does bother me, as well as questions on whether it in fact has a robust enough design for hard long-term use. Does it crack like that simply by tightening down the axle?
#19
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18354 Post(s)
Liked 4,502 Times
in
3,346 Posts
You know, what I'd do is to find a bolt that I could thread into the fork and see how stable the dropout feels without putting on so much force to break it. Perhaps thread the axle in from the outside.
Likes For CliffordK:
#20
Senior Member
Join Date: Jul 2007
Posts: 7,569
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1851 Post(s)
Liked 678 Times
in
429 Posts
I think this is the bike.
https://www.bikesdirect.com/products/...rance-road.htm
At $650, you're really already scraping the bottom of the barrel.
For the chainring and rotor, it really depends on the design, quality, and how bad it is.
In years past, it was considered routine for bike builders to true up parts like the cranksets, and I presume low-end rotors now.\\
That fork does bother me, as well as questions on whether it in fact has a robust enough design for hard long-term use. Does it crack like that simply by tightening down the axle?
https://www.bikesdirect.com/products/...rance-road.htm
At $650, you're really already scraping the bottom of the barrel.
For the chainring and rotor, it really depends on the design, quality, and how bad it is.
In years past, it was considered routine for bike builders to true up parts like the cranksets, and I presume low-end rotors now.\\
That fork does bother me, as well as questions on whether it in fact has a robust enough design for hard long-term use. Does it crack like that simply by tightening down the axle?
#21
carbon is too light
Join Date: Jul 2008
Location: Texas
Posts: 1,259
Bikes: Yes.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 103 Post(s)
Liked 248 Times
in
159 Posts
I would stay far away from bikes direct. Their frames are garbage. I bought one years ago that had full dura-ace, and all high end parts, etc, but the rear drop out was not aligned properly with the frame and the rear wheel would sit in the frame crooked and rubbed on the left chain stay if I got out of the saddle. They wouldn't replace it either because "it was within tolerance". I ended up throwing the frameset in the dumpster and built another frame up with the parts.
Likes For procrit:
#22
Senior Member
Join Date: Aug 2019
Location: Québec, Canada
Posts: 2,108
Bikes: SL8 Pro, TCR beater
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 583 Times
in
438 Posts
I think this is the bike.
https://www.bikesdirect.com/products/...rance-road.htm
At $650, you're really already scraping the bottom of the barrel.
For the chainring and rotor, it really depends on the design, quality, and how bad it is.
In years past, it was considered routine for bike builders to true up parts like the cranksets, and I presume low-end rotors now.\\
That fork does bother me, as well as questions on whether it in fact has a robust enough design for hard long-term use. Does it crack like that simply by tightening down the axle?
https://www.bikesdirect.com/products/...rance-road.htm
At $650, you're really already scraping the bottom of the barrel.
For the chainring and rotor, it really depends on the design, quality, and how bad it is.
In years past, it was considered routine for bike builders to true up parts like the cranksets, and I presume low-end rotors now.\\
That fork does bother me, as well as questions on whether it in fact has a robust enough design for hard long-term use. Does it crack like that simply by tightening down the axle?
#23
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,953
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6178 Post(s)
Liked 4,795 Times
in
3,307 Posts
What did the customer support of the site you bought it from say?
#24
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,032
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 560 Post(s)
Tagged: 2 Thread(s)
Quoted: 22579 Post(s)
Liked 8,919 Times
in
4,153 Posts
To the OP, it's too hard for most of us to tell from the picture if this is just cosmetic or structural, but enough red flags going up that you may want to reconsider your options.
#25
Senior Member
Join Date: Feb 2018
Posts: 1,410
Bikes: 2017 Specialized Allez Sprint Comp
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 850 Post(s)
Liked 344 Times
in
247 Posts
If it’s the Tektro Novelas that came on my bikesdirect bike? Not very powerful at all. I was never able to lock up my front wheel... ever. You don’t stop. You request a reduction of speed.