Cassette, Freehub, Freewheel
#3
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,779
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3583 Post(s)
Liked 3,395 Times
in
1,929 Posts
Perhaps this can help:
https://www.sheldonbrown.com/free-k7.html
tl;dr version: freewheels are old technology, and not as strong or reliable as a freehub/cassette system when the number of sprockets on the rear cluster is greater than seven.
https://www.sheldonbrown.com/free-k7.html
tl;dr version: freewheels are old technology, and not as strong or reliable as a freehub/cassette system when the number of sprockets on the rear cluster is greater than seven.
#4
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,801
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1943 Post(s)
Liked 2,164 Times
in
1,323 Posts
Basically a freewheel is a carrier, body, with the gears, cogs attached, that simply screws onto the rear hub. The entire assembly, with ratcheting pawls, is installed and removed.
A freehub has the carrier, body, attached to the hub and a cassette, (gears/cogs) slides onto it. Only the cassette is replaced.
Since the question is being asked, I’m assuming you have, or are looking at a 7 speed, maybe 8, bike.
What is funny is that for all venerable 7 speed setups out there, 7 speed freehubs were so short lived, only 6 was less. They were only around for a few years. As far as I know, no one has made a 7 speed freehub for 25 years. Note: All new 7 speed bikes are freewheels that are not as strong and usually lower quality.
Ironically 8 speed freehubs have been around for decades. The 8 speed 130mm/135mm freehub accepts 9 and 10 speeds without modification so it just kept rolling along.
John
A freehub has the carrier, body, attached to the hub and a cassette, (gears/cogs) slides onto it. Only the cassette is replaced.
Since the question is being asked, I’m assuming you have, or are looking at a 7 speed, maybe 8, bike.
What is funny is that for all venerable 7 speed setups out there, 7 speed freehubs were so short lived, only 6 was less. They were only around for a few years. As far as I know, no one has made a 7 speed freehub for 25 years. Note: All new 7 speed bikes are freewheels that are not as strong and usually lower quality.
Ironically 8 speed freehubs have been around for decades. The 8 speed 130mm/135mm freehub accepts 9 and 10 speeds without modification so it just kept rolling along.
John
#5
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,327
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3897 Post(s)
Liked 4,829 Times
in
2,228 Posts
A freehub with cassette is stronger than a freewheel.
Both should be stronger than your legs.
Both should be stronger than your legs.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
#7
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,801
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1943 Post(s)
Liked 2,164 Times
in
1,323 Posts
While mountain bikes didn’t usher in freehubs, they were the primary benefactor. A rider on smooth roads usually didn’t have any issues.
Put that same rider on terrain with rocks, roots, and drops and that axle doesn’t fare so well. Legs have nothing to do with it.
John
Put that same rider on terrain with rocks, roots, and drops and that axle doesn’t fare so well. Legs have nothing to do with it.
John
#8
Full Member
#9
Banned
Join Date: Feb 2008
Location: Mississauga/Toronto, Ontario canada
Posts: 8,721
Bikes: I have 3 singlespeed/fixed gear bikes
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 4227 Post(s)
Liked 2,488 Times
in
1,286 Posts
I removed singlespeed freewheels many times. It's important to use the proper tool that is compatible with the type of freewheel that you're removing and as long as everything is set up correctly it's shouldn't be a problem. The biggest mistake that people make is, they don't put enough grease or no grease at all on the threads when installing a new freewheel or they not using the removal tool correctly.
#10
Banned
Join Date: Feb 2008
Location: Mississauga/Toronto, Ontario canada
Posts: 8,721
Bikes: I have 3 singlespeed/fixed gear bikes
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 4227 Post(s)
Liked 2,488 Times
in
1,286 Posts
I know it's not for everybody but a fixed gear track cog is the sturdiest, most durable and longest lasting of all, there is nothing to break or go wrong with it. The second most durable thing is a singlespeed freewheel, it will outlast any freehub cassette or multi speed freewheel.
#11
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,004
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times
in
806 Posts
^ this is not a universally true statement. It ignores all things related to quality in both design/material selection and manufacturing. I can't even fathom why anyone would believe this.