1985 Fuji IV Frameset
#1
Junior Member
Thread Starter
1985 Fuji IV Frameset
Hello, wondering how much y'all think this might be worth. Listed at $165 w/ $35 shipping. Live in the D.C. Metro area and have been scouring FB Marketplace and Craigslist for a few weeks, but too many subpar models in 64cm as of late. Might be able to hold off for a few more weeks if this is a not so good deal. Thanks for the consideration!
#2
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
Not a great deal but certainly an OK one. The paint is in good shape which is a big plus and the chrome will clean up nicely. Are there any dings? The rust on the left chain stay (visible in 2 of the pics) has me a bit concerned.
One thing about tall bikes: there isn't much supply and there isn't much demand. I'd ask for a discount based on the rust issues and then buy the frame once you work out a price.
Do you have parts on hand? If not, velo orange sells very serviceable 126 mm wheels built around Sun CR 18 rims at a reasonable price.
Old mountain bikes are a great source for quality touring components (derailleurs and cranks) as well. If you can get one your size at a reasonable price with components you like, you can rob the bike for parts and build it up as an inexpensive lock up/beater bike.
I think $100-$150 or so for a quality steel frame is a pretty decent price and touring frames command a premium.
One thing about tall bikes: there isn't much supply and there isn't much demand. I'd ask for a discount based on the rust issues and then buy the frame once you work out a price.
Do you have parts on hand? If not, velo orange sells very serviceable 126 mm wheels built around Sun CR 18 rims at a reasonable price.
Old mountain bikes are a great source for quality touring components (derailleurs and cranks) as well. If you can get one your size at a reasonable price with components you like, you can rob the bike for parts and build it up as an inexpensive lock up/beater bike.
I think $100-$150 or so for a quality steel frame is a pretty decent price and touring frames command a premium.
Last edited by bikemig; 05-21-19 at 06:57 AM.
#3
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,004
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times
in
806 Posts
Dia Compe 960 cantilevers were original. You'll be able to find a set.
I have a Sugino AT half-step triple on one bike. And another set up more MTB-ish on my wife's Trek 620.
I'm down in Alexandria if you need a hand with anything. I'd be glad to help. Phil
I have a Sugino AT half-step triple on one bike. And another set up more MTB-ish on my wife's Trek 620.
I'm down in Alexandria if you need a hand with anything. I'd be glad to help. Phil
#4
Junior Member
Thread Starter
Not a great deal but certainly an OK one. The paint is in good shape which is a big plus and the chrome will clean up nicely. Are there any dings? The rust on the left chain stay (visible in 2 of the pics) has me a bit concerned.
One thing about tall bikes: there isn't much supply and there isn't much demand. I'd ask for a discount based on the rust issues and then buy the frame once you work out a price.
Do you have parts on hand? If not, velo orange sells very serviceable 126 mm wheels built around Sun CR 18 rims at a reasonable price.
Old mountain bikes are a great source for quality touring components (derailleurs and cranks) as well. If you can get one your size at a reasonable price with components you like, you can rob the bike for parts and build it up as an inexpensive lock up/beater bike.
I think $100-$150 or so for a quality steel frame is a pretty decent price and touring frames command a premium.
One thing about tall bikes: there isn't much supply and there isn't much demand. I'd ask for a discount based on the rust issues and then buy the frame once you work out a price.
Do you have parts on hand? If not, velo orange sells very serviceable 126 mm wheels built around Sun CR 18 rims at a reasonable price.
Old mountain bikes are a great source for quality touring components (derailleurs and cranks) as well. If you can get one your size at a reasonable price with components you like, you can rob the bike for parts and build it up as an inexpensive lock up/beater bike.
I think $100-$150 or so for a quality steel frame is a pretty decent price and touring frames command a premium.
Thank you for your insights. There doesn't seem to be any dings which is nice; but given that I want to spread the rear to 135mm I wonder what the long-term effects of the chain stay rust might be. Perhaps if I tried to clean/contain it some. I suppose the inside of the chain stay would be the best location to take a tad bit of paint off and seal it up if warranted. Might pull the trigger if i get it down then and nothing else comes along!
#5
Junior Member
Thread Starter
Oh, hey! Thanks for reaching out then Phil. I'm out over here in Aldie. Names David. This one wouldn't be built w/ vintage components; but I am looking for cantilever solutions to adapt a 700c wheel. I think I took a screenshot of a tread regarding this. Forget if these were mentioned as being accommodating or not.
#6
Senior Member
Join Date: Oct 2011
Location: Fairplay Co
Posts: 9,519
Bikes: Current 79 Nishiki Custum Sport, Jeunet 620, notable previous bikes P.K. Ripper loop tail, Kawahara Laser Lite, Paramount Track full chrome, Raliegh Internatioanl, Motobecan Super Mirage. 59 Crown royak 3 speed
Mentioned: 26 Post(s)
Tagged: 1 Thread(s)
Quoted: 790 Post(s)
Liked 1,767 Times
in
635 Posts
Nice frame set OK price. But it won't really work for 135 spacing or 700c wheels. These were designed for fixed height relatively short dia-compe canti's so there is much or any room to adjust downward even with different brakes. You can get nice 27 touring wheels with 126 modern cassette rear hub to run modern gearing. I would suggest if you want to run 700's and modern gearing you look for a slightly newer late 80's early 90's steel frame designed for 700's and 130 spacing then you could just bolt any modern groupo you want without issues.
#8
Junior Member
Thread Starter
Nice frame set OK price. But it won't really work for 135 spacing or 700c wheels. These were designed for fixed height relatively short dia-compe canti's so there is much or any room to adjust downward even with different brakes. You can get nice 27 touring wheels with 126 modern cassette rear hub to run modern gearing. I would suggest if you want to run 700's and modern gearing you look for a slightly newer late 80's early 90's steel frame designed for 700's and 130 spacing then you could just bolt any modern groupo you want without issues.
#9
Thrifty Bill
Join Date: Jan 2008
Location: Mountains of Western NC
Posts: 23,525
Bikes: 86 Katakura Silk, 87 Prologue X2, 88 Cimarron LE, 1975 Sekai 4000 Professional, 73 Paramount, plus more
Mentioned: 96 Post(s)
Tagged: 0 Thread(s)
Quoted: 1236 Post(s)
Liked 964 Times
in
628 Posts
I don't like the rust. Rust under paint too. I'd pass.
#10
Senior Member
Join Date: Mar 2013
Location: Maryland
Posts: 3,800
Bikes: Lots of English 3-speeds, a couple of old road bikes, 3 mountain bikes, 1 hybrid, and a couple of mash-ups
Mentioned: 53 Post(s)
Tagged: 0 Thread(s)
Quoted: 887 Post(s)
Liked 335 Times
in
225 Posts
$200 after shipping and a few hidden rust issues for a bare frame and fork. When you assess the rust and how to deal with it as well as the cost, you still have to find/purchase everything else needed to build it up. I think I would pass.
#11
Senior Member
Join Date: May 2011
Location: Seattle WA
Posts: 2,841
Bikes: 2009 Handsome Devil, 1987 Trek 520 Cirrus, 1978 Motobecane Grand Touring, 1987 Nishiki Cresta GT, 1989 Specialized Allez Former bikes; 1986 Miyata Trail Runner, 1979 Miyata 912, 2011 VO Rando, 1999 Cannondale R800, 1986 Schwinn Passage
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 796 Post(s)
Liked 522 Times
in
367 Posts
If you are thinking of modern canti's I would suggest measuring the distance between the fork canti studs as those 80's tourers had a narrower spread between canti studs than todays bikes so new canti's may not work up front - ask me how I know (86 Schwinn Passage) you can still run vintage canti's up front and probably find some that will accommodate a 700c wheel but its a potential issue to deal with. I too would be wary of rust under paint. YMMV.