Fender recommendation for MTB
#1
Senior Member
Thread Starter
Fender recommendation for MTB
Finally setting up my '85 Schwinn Mirada, a 26"-wheel bike with canti brakes, which I've had as a frame for a while, and which has a nice brown paint color. I had long assumed it would be easy to find a beige/caramel colored plastic fender to go on it. I guess what I've been seeing is a beige-colored SKS longboard, but now that I really look, I'm only seeing that offered in a 700 size.
I've seen a PlanetBike Cascadia fender in brown, but I really wanted some light contrast.
Any ideas for me? I guess white, cream, beige or gold would be OK.
I've seen a PlanetBike Cascadia fender in brown, but I really wanted some light contrast.
Any ideas for me? I guess white, cream, beige or gold would be OK.
#3
Senior Member
Thread Starter
Right. There are many choices in black plastic, one I saw in chrome (of course could do aluminum or steel but I’d rather have plastic) and silver. Probably some white in my search. But the colors I’d prefer—Champaign/beige/tan/caramel/gold, no.
I suppose plastic paint on any color or paint on aluminum is an option, but the durability would not be there.
I suppose plastic paint on any color or paint on aluminum is an option, but the durability would not be there.
#4
Senior Member
Right. There are many choices in black plastic, one I saw in chrome (of course could do aluminum or steel but I’d rather have plastic) and silver. Probably some white in my search. But the colors I’d prefer—Champaign/beige/tan/caramel/gold, no.
I suppose plastic paint on any color or paint on aluminum is an option, but the durability would not be there.
Mybinstinct would be to go with silver or black, but if you’re up for the project it might wind up looking good. I know I’ve seen people post pics of painted fenders, but can’t recall if they were plastic or not.
#6
Senior Member
Nothing much to add, other than don't overlook cheap steel fenders you can get off old (beach) cruisers, etc, esp. if you have a bike co-op around. Here's a 26" project I'm working on, and the old oxidized black fenders were perfect with the pink, and they were free from the surplus parts bin. Since they are steel, they are not that light, and no one wanted them. But heck, the bike's a tank anyway. It seems to me they'd be easy to sand up, prime, and spray any color you'd need if you could find an old set.
Good luck with your project!
#8
Cyclist
I wouldn't use plastic fenders--they spray water everywhere as opposed to metal fenders that allow the water to flow to the bottom. Better than nothing, but I'd get Berthoud or Velo Orange, and paint them if necessary.
#9
Senior Member
you might have fenders that are not wide enough/low enough, or you might have stuff stuck to the underside. i've never found plastic fenders to spray more than metal ones. but if you want overkill, you could just clean + spray teflon lube on the inside, lol.
Last edited by smoothness; 02-19-19 at 09:27 PM.
#10
Senior Member
Join Date: Mar 2013
Location: Maryland
Posts: 3,800
Bikes: Lots of English 3-speeds, a couple of old road bikes, 3 mountain bikes, 1 hybrid, and a couple of mash-ups
Mentioned: 53 Post(s)
Tagged: 0 Thread(s)
Quoted: 887 Post(s)
Liked 335 Times
in
225 Posts
I agree. IMO black or silver/aluminum fenders look good on nearly any bike. My preference is SKS because of the range of adjustment, but Planet Bike is OK as well. Paints formulated for plastic can expand color options.
#11
Mr. Anachronism
Join Date: Jan 2013
Location: Somewhere west of Tobie's
Posts: 2,087
Bikes: fillet-brazed Chicago Schwinns, and some other stuff
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 526 Post(s)
Liked 256 Times
in
165 Posts
Another possibility in the colors you seek are fenders made of wood.
They're not cheap, but they sure look nice!
They're not cheap, but they sure look nice!
__________________
"My only true wisdom is in knowing I have none" -Socrates
"My only true wisdom is in knowing I have none" -Socrates
Last edited by Hudson308; 02-20-19 at 03:16 PM.
#12
Senior Member
Another possibility in the colors you seek are fenders made of wood.
They're not cheap, but they sure look nice!
They're not cheap, but they sure look nice!
Last edited by smoothness; 02-20-19 at 07:44 PM.
#13
Senior Member
Join Date: Nov 2003
Location: Soviet of Oregon or Pensacola FL
Posts: 5,342
Bikes: Still have a few left!
Mentioned: 48 Post(s)
Tagged: 0 Thread(s)
Quoted: 467 Post(s)
Liked 532 Times
in
267 Posts
Good advice above to check out local co-ops. I got this yellow set at NW Hub in Salem, OR. Painted steel with SS stays. Look like new and only $16. Stays were for a different bike, so a bit short, but got them to work. Don
#14
Bikes are okay, I guess.
Join Date: Jan 2015
Location: Richmond, Virginia
Posts: 6,938
Bikes: Waterford Paramount Touring, Giant CFM-2, Raleigh Sports 3-speeds in M23 & L23, Schwinn Cimarron oddball build, Marin Palisades Trail dropbar conversion, Nishiki Cresta GT
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 2647 Post(s)
Liked 2,446 Times
in
1,557 Posts
Zefal made colored ones years ago so searching might turn up something that matches or contrasts nicely.
#15
Full Member
First, cheers on your project. I love those old MTBs when they are re-worked into city bikes, "gravel" bikes, all-rounders...they work great, I think!
Nothing much to add, other than don't overlook cheap steel fenders you can get off old (beach) cruisers, etc, esp. if you have a bike co-op around. Here's a 26" project I'm working on, and the old oxidized black fenders were perfect with the pink, and they were free from the surplus parts bin. Since they are steel, they are not that light, and no one wanted them. But heck, the bike's a tank anyway. It seems to me they'd be easy to sand up, prime, and spray any color you'd need if you could find an old set.
Good luck with your project!
Nothing much to add, other than don't overlook cheap steel fenders you can get off old (beach) cruisers, etc, esp. if you have a bike co-op around. Here's a 26" project I'm working on, and the old oxidized black fenders were perfect with the pink, and they were free from the surplus parts bin. Since they are steel, they are not that light, and no one wanted them. But heck, the bike's a tank anyway. It seems to me they'd be easy to sand up, prime, and spray any color you'd need if you could find an old set.
Good luck with your project!
#16
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1608 Post(s)
Liked 2,216 Times
in
1,103 Posts
I would go with the plastic and paint. Mine are PB and worked well for the 4K of commuting.
P1000030, on Flickr
P1000030, on Flickr
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
#17
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
Serfas Traditional fenders have treated me pretty well: https://www.bikeloft.com/product/ser...untain-266.htm
I bet they'd paint up nicely.
I bet they'd paint up nicely.
Thread
Thread Starter
Forum
Replies
Last Post
polymorphself
Classic & Vintage
10
10-03-18 08:35 AM
ColonelJLloyd
Classic & Vintage
11
02-11-11 12:42 PM