Personal bike shop
#1
Dog Dad
Thread Starter
Personal bike shop
I looked at the "new posters look here" and I tried to search for this to no avail. I'm looking into trying to assemble my own bike shop in my garage or in my shed in my backyard, and I'm on the mechanics page because I would like to know what tools, stands and otherwise bike-related pieces others suggest I have. I'm not looking for an introductory toolset or things to keep in case of emergency, I'm looking for a full scale list of recommended assets to keep in my personal shop. What tools come in the most handy for others, what would they suggest I use to make repairs and restorations easier. Thanks in advance!
#2
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,433
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
Don't forget the really important stuff like shop posters, a small fridge, and a music system.
Likes For bikemig:
#3
Expired Member
Join Date: Jun 2007
Location: TN
Posts: 11,507
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3657 Post(s)
Liked 5,393 Times
in
2,738 Posts
You want to buy a bunch of tools you don't know how to use? A Campy tool set is always a good place to start
Likes For shelbyfv:
#4
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,953
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6178 Post(s)
Liked 4,795 Times
in
3,307 Posts
All you need is a bike and a place to put it that has enough room so you can move around it. Good bright lighting helps too. You might want a work stand, but I've gone well over 50 years without one. And at one time I was keeping my bike, my two kid's bikes and several neighborhood kid's bikes running. Not all stands can hold all types of bikes without risk of bike damage though. So there is one of many gotcha's in the world of buying for your future bike room.
Some tools are more specific to the brand and even the exact model of a component you have. So to buy them before you need them might be money wasted. I've got some tools I only used once to remove a component and had to use a different tool to install the new component I replaced it with. I've since found that bike shops many times will just let me bring the bike or wheel in and loosen it for me. Then I can bring it back later to tighten it. Many times for just the cost of good conversation. But YMMV.
A pedal wrench and a hand full of metric hex keys is all you need to get started. Many pedals need a wrench that is slightly thinner than most normal wrenches. Many pedals though also have a place for a hex key though. So maybe all you need are three or four specific size hex keys. And a philips and flat bladed screwdriver.
Some tools are more specific to the brand and even the exact model of a component you have. So to buy them before you need them might be money wasted. I've got some tools I only used once to remove a component and had to use a different tool to install the new component I replaced it with. I've since found that bike shops many times will just let me bring the bike or wheel in and loosen it for me. Then I can bring it back later to tighten it. Many times for just the cost of good conversation. But YMMV.
A pedal wrench and a hand full of metric hex keys is all you need to get started. Many pedals need a wrench that is slightly thinner than most normal wrenches. Many pedals though also have a place for a hex key though. So maybe all you need are three or four specific size hex keys. And a philips and flat bladed screwdriver.
Likes For Iride01:
#5
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,801
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1943 Post(s)
Liked 2,164 Times
in
1,323 Posts
I've assembled bikes without work stands many years ago. Young and stupid. You should get a work stand and hex/torx wrenches.
However, the list expands depending on your definition of assemble.
Youtube is great place to get a good idea what you need. Just search install bottom bracket, headset, crankset, etc.
John
However, the list expands depending on your definition of assemble.
Youtube is great place to get a good idea what you need. Just search install bottom bracket, headset, crankset, etc.
John
Likes For 70sSanO:
#6
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,835
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2337 Post(s)
Liked 2,813 Times
in
1,536 Posts
pack pcs10 work stand as a starter......
then you could get kits of all ranges
https://www.amazon.com/Bikehand-Bike...s%2C197&sr=8-5
https://www.amazon.com/BIKEHAND-Comp...4-3e7a9c0027d0
to my when I win the lottery vote https://www.electriccyclery.com/shop...YaArHYEALw_wcB
then you could get kits of all ranges
https://www.amazon.com/Bikehand-Bike...s%2C197&sr=8-5
https://www.amazon.com/BIKEHAND-Comp...4-3e7a9c0027d0
to my when I win the lottery vote https://www.electriccyclery.com/shop...YaArHYEALw_wcB
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Likes For squirtdad:
#7
Senior Member
Join Date: Feb 2012
Location: Golden, CO and Tucson, AZ
Posts: 2,835
Bikes: 2016 Fuji Tread, 1983 Trek 520
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 674 Post(s)
Liked 738 Times
in
429 Posts
I agree with buying tools as you need them and as you acquire skills.
You'll want basic mechanics tools like a set of metric Allen keys, combination wrenches, adjustable wrench and screwdrivers. Cone wrenches in 13 and 15 mm will be needed soon. Pedal wrench also, though I have a very narrow adjustable that works fine most of the time.
DItto the comment about part-specific tools, especially for the bottom bracket. There are too many "standards."
If it's an option where you live, consider volunteering at a bike coop or non-profit shop. You can get hands on most tools and figure out what's worth buying.
I also worked on my own bike for well over 30 years before I acquired a bike stand (given to me by a neighbor who was upgrading). I've built wheels without a truing stand or dishing tool, making do with primitive substitutions. A talented mechanic can make some tools from pipe, angle iron, threaded rod, etc.
You'll want basic mechanics tools like a set of metric Allen keys, combination wrenches, adjustable wrench and screwdrivers. Cone wrenches in 13 and 15 mm will be needed soon. Pedal wrench also, though I have a very narrow adjustable that works fine most of the time.
DItto the comment about part-specific tools, especially for the bottom bracket. There are too many "standards."
If it's an option where you live, consider volunteering at a bike coop or non-profit shop. You can get hands on most tools and figure out what's worth buying.
I also worked on my own bike for well over 30 years before I acquired a bike stand (given to me by a neighbor who was upgrading). I've built wheels without a truing stand or dishing tool, making do with primitive substitutions. A talented mechanic can make some tools from pipe, angle iron, threaded rod, etc.
Likes For andrewclaus:
#8
Constant tinkerer
- Nice Allen wrench set
- Phillips and flathead screwdrivers
- Bike stand
- All other specialty tools as needed. Re-packing hubs? Get cone wrenches. Need to cut a chain? Get a chain tool. I personally don't see the logic in buying a tool you have no use for or don't even know what it is.
- Phillips and flathead screwdrivers
- Bike stand
- All other specialty tools as needed. Re-packing hubs? Get cone wrenches. Need to cut a chain? Get a chain tool. I personally don't see the logic in buying a tool you have no use for or don't even know what it is.
Likes For FastJake:
#9
Senior Member
Join Date: Mar 2008
Posts: 8,688
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1074 Post(s)
Liked 295 Times
in
222 Posts
Best I can remember, some bicycle-specific tools in order of procurement:
- wrench for threaded headsets
- Shimano-style freewheel puller
- crank puller
- spoke nipple key
- cone wrenches
- cassette lockring tool
- cable cutter
- outboard bearing bottom bracket tool
- torque wrench
Although I started with a decent stash of generic tools, Allen, Torx, socket wrenches etc etc.
One tool I regret not buying earlier is the pro grade pedal wrench. It would have been cheaper buying that one straight off instead of damaging several regular wrenches first.
- wrench for threaded headsets
- Shimano-style freewheel puller
- crank puller
- spoke nipple key
- cone wrenches
- cassette lockring tool
- cable cutter
- outboard bearing bottom bracket tool
- torque wrench
Although I started with a decent stash of generic tools, Allen, Torx, socket wrenches etc etc.
One tool I regret not buying earlier is the pro grade pedal wrench. It would have been cheaper buying that one straight off instead of damaging several regular wrenches first.
Likes For dabac:
#10
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
Get a good cable cutter. I have never regretted the money I spent on my Felco cutter decades ago; it still works like new.
Likes For dsbrantjr:
#11
Full Member
OP: Any bike of any era? Wheel building? Shimano components? Campy components? Are finances of any concern? The list could get quite long! I've never gotten beyond 9 speed of the Shimano flight deck/dual pivot/octalink era (circa 2000). There have been many "improvements" since then that often have special tools. I'd suggest looking at Park or Ebay or Amazon for a general tool kit and buy specialized tools as you need.
#12
Senior Member
Join Date: Oct 2016
Location: San Mateo,Ca.
Posts: 3,984
Bikes: TRIMMED DOWN THE HERD
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1090 Post(s)
Liked 935 Times
in
600 Posts
You'll never stop buying tools with all the odd sized parts and components bikes have. There's a different tool for every part. And some of those tools will only be used once or twice. Ask me how I know.
Likes For 2cam16:
#13
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,501
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2741 Post(s)
Liked 3,388 Times
in
2,051 Posts
Likes For dedhed:
#14
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,940
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
Quoted: 1301 Post(s)
Liked 1,903 Times
in
1,137 Posts
Bikeboystephen,
At some point you will see the need to get liability insurance. In today's world it is a must! I own a golf club repair business, and have worked as a professional mechanic in a high end bike shop. We had a test ride go bad one day when a girl went on a test ride with her purse slung over her shoulder. It slipped and caught in the front wheel causing a crash and a $1500 ride to the emergency room, stitches and some other bills from the docs. In my golf business only one head coming off and hitting another person will result in close to a $1 million claim. Get insurance first. Smiles, MH
At some point you will see the need to get liability insurance. In today's world it is a must! I own a golf club repair business, and have worked as a professional mechanic in a high end bike shop. We had a test ride go bad one day when a girl went on a test ride with her purse slung over her shoulder. It slipped and caught in the front wheel causing a crash and a $1500 ride to the emergency room, stitches and some other bills from the docs. In my golf business only one head coming off and hitting another person will result in close to a $1 million claim. Get insurance first. Smiles, MH
Likes For Mad Honk:
#15
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,953
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6178 Post(s)
Liked 4,795 Times
in
3,307 Posts
Good point Mad Honk
However I hope by personal shop, he/she meant just their own personal bikes.
Though whether you do your own maintenance or none at all, it still makes sense for many to have an umbrella policy to act as a catch all if you have significant assets to protect from potential lawsuits. Ask your home insurance agent about them.
However I hope by personal shop, he/she meant just their own personal bikes.
Though whether you do your own maintenance or none at all, it still makes sense for many to have an umbrella policy to act as a catch all if you have significant assets to protect from potential lawsuits. Ask your home insurance agent about them.
Last edited by Iride01; 06-29-20 at 05:19 PM.
Likes For Iride01:
#16
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,095 Times
in
741 Posts
The first thing you should get is a good bike repair manual like Lennard Zinn's "Zinn and the Art of Road (or MTB) Bike Maintenance" or the Park Tool's "Blue Book" and read them cover to cover. They will familiarize you with the range of bike repair and maintenance procedures and the required tools. Then decide what types of bikes you want to work on and what level of complexity you want to tackle. At that point you can begin to assemble the needed tools.
Likes For HillRider:
#17
I think I know nothing.
Join Date: Aug 2004
Location: NE PA
Posts: 709
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 233 Post(s)
Liked 290 Times
in
204 Posts
A bench mounted vice, heavy duty. Also, two tools that are somewhat expensive and you could do without but if you have them you will use them are a Derailleur hanger alignment tool and a wheel truing stand.
Likes For Thomas15:
#18
Senior Member
Join Date: Oct 2017
Location: Chapel Hill NC
Posts: 1,683
Bikes: 2000 Litespeed Vortex Chorus 10, 1995 DeBernardi Cromor S/S
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 645 Post(s)
Liked 797 Times
in
446 Posts
All you need is a bike and a place to put it that has enough room so you can move around it. Good bright lighting helps too. You might want a work stand, but I've gone well over 50 years without one. And at one time I was keeping my bike, my two kid's bikes and several neighborhood kid's bikes running. Not all stands can hold all types of bikes without risk of bike damage though. So there is one of many gotcha's in the world of buying for your future bike room.
Some tools are more specific to the brand and even the exact model of a component you have. So to buy them before you need them might be money wasted. I've got some tools I only used once to remove a component and had to use a different tool to install the new component I replaced it with. I've since found that bike shops many times will just let me bring the bike or wheel in and loosen it for me. Then I can bring it back later to tighten it. Many times for just the cost of good conversation. But YMMV.
A pedal wrench and a hand full of metric hex keys is all you need to get started. Many pedals need a wrench that is slightly thinner than most normal wrenches. Many pedals though also have a place for a hex key though. So maybe all you need are three or four specific size hex keys. And a philips and flat bladed screwdriver.
Some tools are more specific to the brand and even the exact model of a component you have. So to buy them before you need them might be money wasted. I've got some tools I only used once to remove a component and had to use a different tool to install the new component I replaced it with. I've since found that bike shops many times will just let me bring the bike or wheel in and loosen it for me. Then I can bring it back later to tighten it. Many times for just the cost of good conversation. But YMMV.
A pedal wrench and a hand full of metric hex keys is all you need to get started. Many pedals need a wrench that is slightly thinner than most normal wrenches. Many pedals though also have a place for a hex key though. So maybe all you need are three or four specific size hex keys. And a philips and flat bladed screwdriver.
#19
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,095 Times
in
741 Posts
Likes For Thomas15:
#21
Senior Member
Join Date: Jan 2016
Location: Alabama
Posts: 519
Bikes: Konas: Jake the Snake-Fire Mountain-Zing Supreme, Dew Deluxe,Zone Ltd. (frame, needs parts), Surly Long Haul Trucker, Santana Arriva tandem, Montagues: Paratrooper-Fit, Trek 1200, Bianchi Ocelot, Fantom Cross Uno, Bridgestone 200
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 108 Post(s)
Liked 227 Times
in
122 Posts
I have a shop in my basement, but the mechanic is kind of a dork.
#22
Newbie
To start? High quality 4, 5, and 6mm hex/allen keys, a small In lb/nm torque wrench(very useful), a chain whip, 13-17mm cone wrenches, a bbt-9 bottom bracket tool, a crank puller and a decent set of cable cutters. With avid online shopping searches, you could score all in new or like new condition for under $50. Anything like metric sockets or an adjustable wrench you can utilize from your everyday toolchest for now.
Oh, and get some good grease! You can get a 4 oz tube of park tool polylube or any other urea base grease for under $10, a good calcium grease like Lubriplate 130-AA (10oz) for about $15, and a good lithium grease like Mobil SHC PM460 (14oz) also for about $15. I use all 3 for different applications, and those three tubes of grease would last you probably close to half a year, or way longer depending on how many bikes you're servicing.
Also as others have stressed, invest in a stand. Cringe once, enjoy the time & frustration savings well after the purchase; $40 or less for new off brand models.
Oh, and get some good grease! You can get a 4 oz tube of park tool polylube or any other urea base grease for under $10, a good calcium grease like Lubriplate 130-AA (10oz) for about $15, and a good lithium grease like Mobil SHC PM460 (14oz) also for about $15. I use all 3 for different applications, and those three tubes of grease would last you probably close to half a year, or way longer depending on how many bikes you're servicing.
Also as others have stressed, invest in a stand. Cringe once, enjoy the time & frustration savings well after the purchase; $40 or less for new off brand models.
Likes For funbuffalo24:
#23
Senior Member
If you are asking the question for your own personal use, a set of allen wrenches. Everything bike related is metric. Get a cassette tool that fits your cassette, probably one big adjustable wrench. Go around your bike and see what parts it uses and get tools to work on those parts.
If you are looking to work on other people's bikes, fuhgeddaboudit. If you don't know what tools you need you aren't up to the task. I looked at a neighbor's bike last week and my hands got so dirty I swore I'd never touch another bike other than my own.
If you are looking to work on other people's bikes, fuhgeddaboudit. If you don't know what tools you need you aren't up to the task. I looked at a neighbor's bike last week and my hands got so dirty I swore I'd never touch another bike other than my own.
Likes For zacster:
#24
Senior Member
+1 for everything everyone suggested.
I will add, a shop apron. Way more useful than you can imagine.
I will add, a shop apron. Way more useful than you can imagine.
Likes For texaspandj:
#25
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,501
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2741 Post(s)
Liked 3,388 Times
in
2,051 Posts
6-8 speed eyeball alignment is sufficient, on the few occasions on higher speed bikes I let the shop do it for $15 rather than buy the $75 tool. So far I'm still ahead.
You can true wheels just fine using zip ties. If I were building wheels that would be a different story.