A Ride to Mom's House
#1
Full Member
Thread Starter
A Ride to Mom's House
I had to share this. A few weeks ago I was very lucky to acquire a hardly used and well stored 1984 Trek 720 in my size. I'm 6'3". Currently working to improve my fitness level for an ambitious bike tour and I want to use the 720.
I just finished modernizing and fitting the 720. The build has 700c wheels, 108 to 16 gear inch gearing and indexed b
ar end shifters. The quill stem adapter and cozy stem fixes the reach for me. I bought the panniers used several years ago and finally put them to use.
Mom is 89 and lives 90 miles away and is the destination for the shakedown practice tour to Mom's house. It'll be a two day ride each way. My tent uses trekking poles so they'll be poking out the back of the rear rack.
I attached a couple photos of the fitted bike yet to be loaded.
Thanks for looking.
I just finished modernizing and fitting the 720. The build has 700c wheels, 108 to 16 gear inch gearing and indexed b
ar end shifters. The quill stem adapter and cozy stem fixes the reach for me. I bought the panniers used several years ago and finally put them to use.
Mom is 89 and lives 90 miles away and is the destination for the shakedown practice tour to Mom's house. It'll be a two day ride each way. My tent uses trekking poles so they'll be poking out the back of the rear rack.
I attached a couple photos of the fitted bike yet to be loaded.
Thanks for looking.
#2
Senior Member
Join Date: Feb 2012
Location: Golden, CO and Tucson, AZ
Posts: 2,835
Bikes: 2016 Fuji Tread, 1983 Trek 520
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 674 Post(s)
Liked 739 Times
in
430 Posts
I was given almost the same bike (gray, 1983) a few years ago and did much the same thing. The canti brakes barely reach down to the 700c wheels, don't they. Mine came with the Helicomatic rear hub and I gladly upgraded that to a 9-speed rear, cold-setting the frame to 130 mm. I put brifters on mine. I toured on it for several years, then sold it to a guy heading to Cuba, who was going to donate the bike to a local there when he was done with his trip.
Enjoy your ride.
Enjoy your ride.
#4
Full Member
Thread Starter
I was given almost the same bike (gray, 1983) a few years ago and did much the same thing. The canti brakes barely reach down to the 700c wheels, don't they. Mine came with the Helicomatic rear hub and I gladly upgraded that to a 9-speed rear, cold-setting the frame to 130 mm. I put brifters on mine. I toured on it for several years, then sold it to a guy heading to Cuba, who was going to donate the bike to a local there when he was done with his trip.
Enjoy your ride.
Enjoy your ride.
No problem adjusting the brakes to 700c. I wish I could fit a little wider tire. I could probably go one size larger.
#5
Senior Member
Join Date: Dec 2010
Location: northern Deep South
Posts: 8,895
Bikes: Fuji Touring, Novara Randonee
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 2599 Post(s)
Liked 1,924 Times
in
1,208 Posts
My wife wishes I wouldn’t ride on roads without safe bike lanes. I’ll probably seek out routes on back roads that’ll probably have varied surfaces and conditions..
#6
Senior Member
Join Date: Feb 2012
Location: Golden, CO and Tucson, AZ
Posts: 2,835
Bikes: 2016 Fuji Tread, 1983 Trek 520
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 674 Post(s)
Liked 739 Times
in
430 Posts
Ditto on aligning the dropouts. The rear wheel wouldn't stay in straight under high torque until I did.
Ditto also on learning to ride in traffic. I've been riding in traffic for over 50 years, including commuting for my entire school and engineering career with lots of night riding and harsh weather, and am still learning stuff. I took a "responsible cyclist" course in my town last year, thinking I could teach it, but it was worthwhile. Excellent references above. A properly-ridden bicycle can be an excellent alternative transport, and the more people do it the safer it'll be.
In my opinion, the best innovation for cycling in my lifetime has been the LED bike light. They're bright and cheap and the batteries last a long time, so light yourself up. High-vis clothing gets you more room and care from motorists, too.
Ditto also on learning to ride in traffic. I've been riding in traffic for over 50 years, including commuting for my entire school and engineering career with lots of night riding and harsh weather, and am still learning stuff. I took a "responsible cyclist" course in my town last year, thinking I could teach it, but it was worthwhile. Excellent references above. A properly-ridden bicycle can be an excellent alternative transport, and the more people do it the safer it'll be.
In my opinion, the best innovation for cycling in my lifetime has been the LED bike light. They're bright and cheap and the batteries last a long time, so light yourself up. High-vis clothing gets you more room and care from motorists, too.
#7
Full Member
Thread Starter
I did a ghetto alignment on one bike I cold set using 3/8” all thread, nuts and washers. Not sure how well that worked. I’ll look for a local shop that has the tool. I want that 720 to be perfect to make up for my condition.
I used to be a roadie forty years ago, in fact completed a few double century rides on an XL frame Nishiki 12 speed. Looking back I mistakenly thought those were fun. Traffic worries weren’t nearly as concerning as now. There was no wife in those days to look after my safety. A road riding course would be a welcomed activity. I’ll look into it.
I used to be a roadie forty years ago, in fact completed a few double century rides on an XL frame Nishiki 12 speed. Looking back I mistakenly thought those were fun. Traffic worries weren’t nearly as concerning as now. There was no wife in those days to look after my safety. A road riding course would be a welcomed activity. I’ll look into it.