Spokes creaking?
#1
Senior Member
Thread Starter
Spokes creaking?
I have a mountain bike with 26“ Fulcrum Red Power XL wheels. Since I had a kid, sometimes I attach a kid seat to the bike and go on some easy paths at relatively low speed. I also use this bike to get my son back from the school twice a week. I've been doing this without problems for 1.5 years. I weight 74kg and my son weights 16kg.
Today, however on a 9km ride I did with him, I noticed rhythmic creaking on the rear wheel. Especially when climbing, but also when coasting downhill.
I supposed the spokes would be loose, but it's not the case. Is it possible that the rims can't withstand so much load? They're 24 spokes with a 2:1 lace pattern and never given me any problem. I have always been very carful when carrying my son and always go really slowly over bumps (not only for the wheels, but also to avoid him hitting the rear of the saddle).
Is it possible that the wheels can't withstand occasional use with a child seat?
Today, however on a 9km ride I did with him, I noticed rhythmic creaking on the rear wheel. Especially when climbing, but also when coasting downhill.
I supposed the spokes would be loose, but it's not the case. Is it possible that the rims can't withstand so much load? They're 24 spokes with a 2:1 lace pattern and never given me any problem. I have always been very carful when carrying my son and always go really slowly over bumps (not only for the wheels, but also to avoid him hitting the rear of the saddle).
Is it possible that the wheels can't withstand occasional use with a child seat?
#3
Senior Member
Thread Starter
The wheels are designed in a way that the spokes don't touch each other when they cross. So that's out of the question too.
#4
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,410
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6241 Post(s)
Liked 4,252 Times
in
2,385 Posts
I have a mountain bike with 26“ Fulcrum Red Power XL wheels. Since I had a kid, sometimes I attach a kid seat to the bike and go on some easy paths at relatively low speed. I also use this bike to get my son back from the school twice a week. I've been doing this without problems for 1.5 years. I weight 74kg and my son weights 16kg.
Today, however on a 9km ride I did with him, I noticed rhythmic creaking on the rear wheel. Especially when climbing, but also when coasting downhill.
I supposed the spokes would be loose, but it's not the case. Is it possible that the rims can't withstand so much load? They're 24 spokes with a 2:1 lace pattern and never given me any problem. I have always been very carful when carrying my son and always go really slowly over bumps (not only for the wheels, but also to avoid him hitting the rear of the saddle).
Is it possible that the wheels can't withstand occasional use with a child seat?
Today, however on a 9km ride I did with him, I noticed rhythmic creaking on the rear wheel. Especially when climbing, but also when coasting downhill.
I supposed the spokes would be loose, but it's not the case. Is it possible that the rims can't withstand so much load? They're 24 spokes with a 2:1 lace pattern and never given me any problem. I have always been very carful when carrying my son and always go really slowly over bumps (not only for the wheels, but also to avoid him hitting the rear of the saddle).
Is it possible that the wheels can't withstand occasional use with a child seat?
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#5
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,123
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4224 Post(s)
Liked 3,917 Times
in
2,336 Posts
Placing a small drop of thin lube on each spoke nipple/rim hole contact will eliminate that potential source, at least for a little while.
I somewhat disagree with Stuart though. The wheel described is way wrong for the use the bike is seeing and baby seats add a lot of load and leverage. Too few spokes IMO. Perhaps that 1.5 years of trouble few use was the wheel's "lifespan" in this application. Andy
I somewhat disagree with Stuart though. The wheel described is way wrong for the use the bike is seeing and baby seats add a lot of load and leverage. Too few spokes IMO. Perhaps that 1.5 years of trouble few use was the wheel's "lifespan" in this application. Andy
__________________
AndrewRStewart
AndrewRStewart
#7
Senior Member
Thread Starter
Placing a small drop of thin lube on each spoke nipple/rim hole contact will eliminate that potential source, at least for a little while.
I somewhat disagree with Stuart though. The wheel described is way wrong for the use the bike is seeing and baby seats add a lot of load and leverage. Too few spokes IMO. Perhaps that 1.5 years of trouble few use was the wheel's "lifespan" in this application. Andy
I somewhat disagree with Stuart though. The wheel described is way wrong for the use the bike is seeing and baby seats add a lot of load and leverage. Too few spokes IMO. Perhaps that 1.5 years of trouble few use was the wheel's "lifespan" in this application. Andy
I thought slowly and carefully riding with him wouldn't be worse than riding hard alone. Maybe I was wrong.
I have inspected the rim and hubs and couldn't find any crack. So I'm not sure what else to do...
#8
Really Old Senior Member
Pluck the spokes.
They should all have the same tone per side.
They should all have the same tone per side.
#9
Senior Member
Join Date: Jun 2014
Location: Ontario, Canada
Posts: 4,624
Bikes: iele Latina, Miele Suprema, Miele Uno LS, Miele Miele Beta, MMTB, Bianchi Model Unknown, Fiori Venezia, Fiori Napoli, VeloSport Adamas AX
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1324 Post(s)
Liked 927 Times
in
640 Posts
Yes. I understand the wheel is not ideal for this application, but it's an old mtb and I couldn't justify buying a new bike or rim just for carrying my son. I plan on replacing the whole bike when my son grows and I have time to ride again anyway. I wouldn't have mounted the seat on a bike I loved.
I thought slowly and carefully riding with him wouldn't be worse than riding hard alone. Maybe I was wrong.
I have inspected the rim and hubs and couldn't find any crack. So I'm not sure what else to do...
I thought slowly and carefully riding with him wouldn't be worse than riding hard alone. Maybe I was wrong.
I have inspected the rim and hubs and couldn't find any crack. So I'm not sure what else to do...
If you don't want to spring for a new wheel with more spokes then I suggest you check out a bicycle co-op near you to see if they have one. You might also try a local bicycle shop to see if they have a slightly used wheel that someone has upgraded from.
Check your existing wheel very carefully for cracks and also check the sidewalls of the outside of the rim to make sure the rim isn't worn almost to the point of failure.
Cheers
#10
Senior Member
Thread Starter
If that wheel fails when your son is on the child seat what do you think will happen?
If you don't want to spring for a new wheel with more spokes then I suggest you check out a bicycle co-op near you to see if they have one. You might also try a local bicycle shop to see if they have a slightly used wheel that someone has upgraded from.
Check your existing wheel very carefully for cracks and also check the sidewalls of the outside of the rim to make sure the rim isn't worn almost to the point of failure.
Cheers
If you don't want to spring for a new wheel with more spokes then I suggest you check out a bicycle co-op near you to see if they have one. You might also try a local bicycle shop to see if they have a slightly used wheel that someone has upgraded from.
Check your existing wheel very carefully for cracks and also check the sidewalls of the outside of the rim to make sure the rim isn't worn almost to the point of failure.
Cheers
I've checked the rim and everything seems alright. This is what's driving me nuts. I'm thinking that maybe I'm going to fit a longer seatpost (otherwise I'm not going to fit on it) on my wife's bike and use that instead since it has 32 spokes wheels. Fitment won't be perfect even with a longer seatpost, but considering what I do when carrying my son, I don't think it will matter.
#11
Senior Member
Join Date: Jun 2014
Location: Ontario, Canada
Posts: 4,624
Bikes: iele Latina, Miele Suprema, Miele Uno LS, Miele Miele Beta, MMTB, Bianchi Model Unknown, Fiori Venezia, Fiori Napoli, VeloSport Adamas AX
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1324 Post(s)
Liked 927 Times
in
640 Posts
How much does your son weigh?
Cheers
Cheers
#12
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,548
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18419 Post(s)
Liked 4,532 Times
in
3,366 Posts
Are the wheels reasonably true, and the tires without flat spots?
#13
Senior Member
Thread Starter
15 or 16kg. Not sure of the exact weight, but no more than 16 for sure.
Tires are new from a couple of months ago and have been ridden less than 200km. No flat spots. Wheels are perfectly true.
Tires are new from a couple of months ago and have been ridden less than 200km. No flat spots. Wheels are perfectly true.
#14
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,631
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,571 Times
in
1,579 Posts
Yes. I understand the wheel is not ideal for this application, but it's an old mtb and I couldn't justify buying a new bike or rim just for carrying my son. I plan on replacing the whole bike when my son grows and I have time to ride again anyway. I wouldn't have mounted the seat on a bike I loved.
I thought slowly and carefully riding with him wouldn't be worse than riding hard alone. Maybe I was wrong.
I have inspected the rim and hubs and couldn't find any crack. So I'm not sure what else to do...
I thought slowly and carefully riding with him wouldn't be worse than riding hard alone. Maybe I was wrong.
I have inspected the rim and hubs and couldn't find any crack. So I'm not sure what else to do...
#15
Senior Member
Thread Starter
#16
Senior Member
Join Date: Jun 2014
Location: Ontario, Canada
Posts: 4,624
Bikes: iele Latina, Miele Suprema, Miele Uno LS, Miele Miele Beta, MMTB, Bianchi Model Unknown, Fiori Venezia, Fiori Napoli, VeloSport Adamas AX
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1324 Post(s)
Liked 927 Times
in
640 Posts
Take the seat off the bike and ride it to see if the noise stops. It might be that your son moving in the seat a bit that's causing the creaking. I'd go over every nut and bolt on the child seat to be positive nothings come loose or cracked at a bolt hole.
Cheers
Cheers
#17
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,631
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,571 Times
in
1,579 Posts
As soon as the kid is sleeping I'm going to disassemble the entire wheel just in case I'm missing something...
#18
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,548
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18419 Post(s)
Liked 4,532 Times
in
3,366 Posts
It is not uncommon for some popping to occur after truing wheels. That will go away after a few rides. It can be minimized with stress relieving or unwinding spokes (unwinding is easier for flat spokes, but it has been suggested marking them before truing. You might be able to also unwind by feel.
I'm not sure if bad bearings will also give a crunchy sound?
#20
Senior Member
Thread Starter
I loosened the bearing preload adjuster and set it again. I have ridden the bike hard and there was no noise even when I tried jumping on the pedals.
I'll have to try again with the seat mounted and my son on it, but I think that the only thing that has changed is that he's probably heavier. Maybe this is the limit for 24 spoke wheels... I rarely use this bike now, since I don't have much time and mainly ride a road bike to commute once or twice a week, so I don't think that something has worn down or broken.
I'll have to try again with the seat mounted and my son on it, but I think that the only thing that has changed is that he's probably heavier. Maybe this is the limit for 24 spoke wheels... I rarely use this bike now, since I don't have much time and mainly ride a road bike to commute once or twice a week, so I don't think that something has worn down or broken.
#21
Senior Member
you should be able to find a used 32 or 36 hole 26in medium quality rear rim for not much money, and would take care of any concerns for pulling your son around, and the wheel will be much stronger than what you have.
Here in the city I live in in Canada, its not hard to find an "old" 26in wheel that would be in fine shape.
an option anyway.
re creaking--as mentioned, very carefully inspect all the child seat mounting brackets for hairline cracks etc, creaks are often a sign of metal stressing. I once had a car that made a creaking sound until one day the front wheel tie rod arm broke going maybe 40kph, wheel turned outwards and it was a sudden screeching stop....I say this given as a dad, I'd take a serious look at everything mounting wise.
good luck finding source.
could you ride past somone knowledgeable enough so that they could try to pinpoint where its coming from, or they ride beside you on a quiet street etc?
Here in the city I live in in Canada, its not hard to find an "old" 26in wheel that would be in fine shape.
an option anyway.
re creaking--as mentioned, very carefully inspect all the child seat mounting brackets for hairline cracks etc, creaks are often a sign of metal stressing. I once had a car that made a creaking sound until one day the front wheel tie rod arm broke going maybe 40kph, wheel turned outwards and it was a sudden screeching stop....I say this given as a dad, I'd take a serious look at everything mounting wise.
good luck finding source.
could you ride past somone knowledgeable enough so that they could try to pinpoint where its coming from, or they ride beside you on a quiet street etc?
#22
Senior Member
Join Date: Nov 2019
Posts: 76
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
The places to look when hunting (hairline) cracks are those where material is stressed most. Leverage effects. Mounts of longer parts that are loaded at the end farest away from the mounting point. The metal on those mount points undergoes an increased force due to the leverage.
One way to make hairline cracks manifest themselves is by pushing/pulling parts. Once I discovered a hairline crack due to a surface being wet. Hairline cracks swallow water when opening, and spill it out when closing (push, release), making them visible.
I'd say a mount place of that kid seat is the biggest suspect here. Check first the one(s) where the kids weight has the biggest leverage on. 16 kilo is quite a weight that sits on quite a distance from the rack.
As "safer" test you could fix a dead and concentrated similar weight (alike halter discs) in the seat, due to the mass concentration and low location leverage is least and no movement of the load. See if that makes a difference.
One way to make hairline cracks manifest themselves is by pushing/pulling parts. Once I discovered a hairline crack due to a surface being wet. Hairline cracks swallow water when opening, and spill it out when closing (push, release), making them visible.
I'd say a mount place of that kid seat is the biggest suspect here. Check first the one(s) where the kids weight has the biggest leverage on. 16 kilo is quite a weight that sits on quite a distance from the rack.
As "safer" test you could fix a dead and concentrated similar weight (alike halter discs) in the seat, due to the mass concentration and low location leverage is least and no movement of the load. See if that makes a difference.
Last edited by Novalite; 12-08-19 at 11:23 AM.