Axle mounted 700C fenders for commuter?
#1
Senior Member
Thread Starter
Axle mounted 700C fenders for commuter?
I have been looking for over a year for replacement fenders for my commuter (they are cheap and rust quickly. I have to repaint them every 3 months). Now it's a must replace thing as I upgraded to wider tires and they sometimes rub on the fenders. Biggest problem is my bike does not have any eyelets and the existing fenders are axle mounted. I can find 26" ones, but no 700C. My tires are 700cx45, so I'd want fenders a little wider to accommodate future coat guards on the sides. Anyone know if these even exist? Should I just give up and try to find a place to get eyelets braised on? Thanks and sorry if this is the wrong subforum.
#2
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,691
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 510 Post(s)
Tagged: 0 Thread(s)
Quoted: 7287 Post(s)
Liked 2,365 Times
in
1,382 Posts
You can use p-clamps on your frame which will act as brazed-on eyelets. Brazing is expensive because it requires repainting the frame.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#3
FLIR Kitten to 0.05C
Join Date: Sep 2014
Location: Lincoln, Nebraska
Posts: 5,331
Bikes: Roadie: Seven Axiom Race Ti w/Chorus 11s. CX/Adventure: Carver Gravel Grinder w/ Di2
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 2349 Post(s)
Liked 406 Times
in
254 Posts
By "axle" I presume you mean for a QR wheel....in which case these fit the bill and are Prime on Amazon and allow you to mount any fender without frame-eyelets.
https://www.amazon.com/gp/product/B00JMAIK7E/
https://www.amazon.com/gp/product/B00JMAIK7E/
Likes For Marcus_Ti:
#4
Senior Member
Thread Starter
By "axle" I presume you mean for a QR wheel....in which case these fit the bill and are Prime on Amazon and allow you to mount any fender without frame-eyelets.
https://www.amazon.com/gp/product/B00JMAIK7E/
https://www.amazon.com/gp/product/B00JMAIK7E/
#5
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,274
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 150 Post(s)
Tagged: 1 Thread(s)
Quoted: 6147 Post(s)
Liked 4,093 Times
in
2,325 Posts
Alternative, if you have a rack on the bike, you can mount the fender under the rack mount bolt, either under the rack leg or outside of it.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#6
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,852
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Mentioned: 584 Post(s)
Tagged: 0 Thread(s)
Quoted: 1908 Post(s)
Liked 574 Times
in
339 Posts
While this isn't a problem I've had to encounter (my bike frames all have eyelets for fenders) it shouldn't be a particularly difficult problem to solve.
You can already get these overpriced aluminum adapters for QR wheels:
https://www.modernbike.com/axiom-axl...-fender-eyelet
You may be able to make those work by enlarging the hole, but I wouldn't bother. I would just make something similar out of stainless steel sheet or some other weatherproof metal (copper or brass would be fine).
You can already get these overpriced aluminum adapters for QR wheels:
https://www.modernbike.com/axiom-axl...-fender-eyelet
You may be able to make those work by enlarging the hole, but I wouldn't bother. I would just make something similar out of stainless steel sheet or some other weatherproof metal (copper or brass would be fine).
__________________
www.rhmsaddles.com.
www.rhmsaddles.com.
#7
Senior Member
Join Date: Mar 2011
Posts: 3,064
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1020 Post(s)
Liked 1,252 Times
in
724 Posts
I will add, that if you have to paint them every three months, you aren't painting them properly. You need to prepare them properly, remove all the rust, prime them, then apply the paint. There is no reason the paint, properly applied, should fail so quickly.
Likes For phughes:
#8
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,600
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18320 Post(s)
Liked 4,489 Times
in
3,338 Posts
If you are looking for fenders, include 28" and 29" in your searches.
But, I'd go with @noglider and look for some P-Clamps to attach the fenders, and hopefully not have to mess with the fenders every time you change tires.
Your frame is metal, right?
But, I'd go with @noglider and look for some P-Clamps to attach the fenders, and hopefully not have to mess with the fenders every time you change tires.
Your frame is metal, right?
Likes For CliffordK:
Likes For Gresp15C:
#10
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,274
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 150 Post(s)
Tagged: 1 Thread(s)
Quoted: 6147 Post(s)
Liked 4,093 Times
in
2,325 Posts
I’m not a fan of them for rack clamps, however. Tubus clamps are stronger and easier to use.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Last edited by cyccommute; 12-09-19 at 09:56 AM.
#11
Very Slow Rider
Join Date: Jul 2017
Location: E Wa
Posts: 1,274
Bikes: Jones Plus LWB, 1983 Centurion Japanese CrMo bike
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 132 Times
in
101 Posts
OP - Have you considered plastic fenders?
I have high quality ones that are durable, require no lower eyelets to mount (although this bike has them on the rear, should these ones ever give up the ghost) and they keep me dry and less weight than metal ones.
The back one looks goofy because I have modified it but still keeps me dry. Running 43mm tires. I know SKS Bluefels are much wider. These are from Portland Design Works. Got them in a trade or somehting, I don't remember....
I have high quality ones that are durable, require no lower eyelets to mount (although this bike has them on the rear, should these ones ever give up the ghost) and they keep me dry and less weight than metal ones.
The back one looks goofy because I have modified it but still keeps me dry. Running 43mm tires. I know SKS Bluefels are much wider. These are from Portland Design Works. Got them in a trade or somehting, I don't remember....
Last edited by davei1980; 12-09-19 at 01:25 PM.
#12
Very Slow Rider
Join Date: Jul 2017
Location: E Wa
Posts: 1,274
Bikes: Jones Plus LWB, 1983 Centurion Japanese CrMo bike
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 132 Times
in
101 Posts
Am I missing something here? Why not experiment with plastic fenders. They're rust proof and can be quite durable
#13
Senior Member
Join Date: Mar 2011
Posts: 3,064
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1020 Post(s)
Liked 1,252 Times
in
724 Posts
No, you aren't missing anything I simply pointed out that the reason the OP's fenders were rusting every three months was not the fault of the fenders, but instead improper painting, namely not priming the fenders first. Whether or not the OP replaces the fenders, it is a good thing to know for future projects. It is something I see here fairly often, people painting without priming first, and then having problems.
Likes For phughes:
#14
Very Slow Rider
Join Date: Jul 2017
Location: E Wa
Posts: 1,274
Bikes: Jones Plus LWB, 1983 Centurion Japanese CrMo bike
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 132 Times
in
101 Posts
No, you aren't missing anything I simply pointed out that the reason the OP's fenders were rusting every three months was not the fault of the fenders, but instead improper painting, namely not priming the fenders first. Whether or not the OP replaces the fenders, it is a good thing to know for future projects. It is something I see here fairly often, people painting without priming first, and then having problems.
Likes For davei1980:
#15
Senior Member
Join Date: Mar 2011
Posts: 3,064
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1020 Post(s)
Liked 1,252 Times
in
724 Posts
For sure! I agree with you they shouldn't rust at all in the short term. That said, if they are rusting, it seems to me plastic fenders seems to be a very obvious work around ignored possibly by the OP. There may be very good reasons to stay with steel fenders too which I haven't considered....
#16
Very Slow Rider
Join Date: Jul 2017
Location: E Wa
Posts: 1,274
Bikes: Jones Plus LWB, 1983 Centurion Japanese CrMo bike
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 132 Times
in
101 Posts
I would say the OP would do well to get some clamps for $1.83 and some plastic fenders.
Likes For davei1980:
#18
Very Slow Rider
Join Date: Jul 2017
Location: E Wa
Posts: 1,274
Bikes: Jones Plus LWB, 1983 Centurion Japanese CrMo bike
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 132 Times
in
101 Posts
“P clamp” or “p clamp for bikes” on Google will find all kinds of clamps. Home Depot has all kinds of cheap ones (that Rivendell sells for $11 per pair). Ones with better coating like these at least look nicer. For fenders, you could even use just place plastic ones like these. QBP also carries ones from Dimension so that they can be ordered from your local bike shop.
I’m not a fan of them for rack clamps, however. Tubus clamps are stronger and easier to use.
I’m not a fan of them for rack clamps, however. Tubus clamps are stronger and easier to use.
Last edited by davei1980; 12-11-19 at 11:15 PM.
#19
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,274
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 150 Post(s)
Tagged: 1 Thread(s)
Quoted: 6147 Post(s)
Liked 4,093 Times
in
2,325 Posts
I am considering a front rack but I have a CF fork. Would you not recommend tubus clamps or generic P clamps? I have eyelets in the rear, just the front of my bike has very little weight on it under normal conditions, makes sense for balance to not put a rack on the rear. Plus this way, I can see my beer as I ride...
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#20
Very Slow Rider
Join Date: Jul 2017
Location: E Wa
Posts: 1,274
Bikes: Jones Plus LWB, 1983 Centurion Japanese CrMo bike
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 132 Times
in
101 Posts
I'll either swap out forks for a CrMo one with eyelets or just go with a rear rack.... I am fully embracing nerdy bike commuting. When I first started I was like "I don't need all those lights and fenders and bells are for kids' bikes!!" Now I am all like "I want that!"
Side note - just got brand new rims as a gift to myself and set up my new tires tubeless. Felt like riding a new bike today!
#21
Senior Member
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,528
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5219 Post(s)
Liked 3,564 Times
in
2,331 Posts
#23
Senior Member
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,528
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5219 Post(s)
Liked 3,564 Times
in
2,331 Posts
#25
Senior Member
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,528
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5219 Post(s)
Liked 3,564 Times
in
2,331 Posts
I was just trying to remember a bike I had where I cut the fenders & lifted them & wondering if the cables prevented me from lifting them. but looks like they weren't a problem. I did it in stages, lifting them once them again higher. also worked on another bike doing the same thing especially when I mounted up the studded tires
https://www.bikeforums.net/hybrid-bi...ide-tires.html
https://www.bikeforums.net/bicycle-m...it-bike-2.html
then I got a MTB & did it all again. that's why I mentioned the rare technique that some ppl resort to
https://www.bikeforums.net/hybrid-bi...ide-tires.html
https://www.bikeforums.net/bicycle-m...it-bike-2.html
then I got a MTB & did it all again. that's why I mentioned the rare technique that some ppl resort to
Last edited by rumrunn6; 12-13-19 at 08:34 AM.