Handlebar Wrap/Tape choice???
#1
Senior Member
Thread Starter
Join Date: Jun 2012
Location: Central California
Posts: 1,083
Bikes: 2001 LeMond Nevada City, ‘92 Merlin Titanium, '84 Torpado Super Strada, ‘84 Schwinn Tempo, '81 Bianchi Limites, '73 Raleigh Supercourse
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 161 Post(s)
Liked 69 Times
in
41 Posts
Handlebar Wrap/Tape choice???
Pre-Explanation: I have always only used cheap, adhesive backed foam tape. Mostly because I knew that I would be building/changing/rewrapping stuff and I didn’t want to waste money.
Now I am to a point where I am satisfied with my builds and need to wrap bars as a final step to getting back up and riding. So, what do you use? WHY? Is it really worth more?
Just curious. Thanks.
Now I am to a point where I am satisfied with my builds and need to wrap bars as a final step to getting back up and riding. So, what do you use? WHY? Is it really worth more?
Just curious. Thanks.
#2
Full Member
I like Fizik Microtex. It looks great, kind of like perforated leather, and wears really well. It's somewhat padded but not too much, which I prefer to a thicker padded tape.
#4
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,602
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3870 Post(s)
Liked 6,461 Times
in
3,194 Posts
For me, Newbaums cotton and Fizik are so close to the same cost on ebay, it just depends what I'm feelin' for that particular bike. Fizik sure feels better over 30 miles if you're without cycling gloves.
#5
Senior Member
+1 on Fizik Microtex
I have it on 3 bikes, currently.
Durable, nice texture, wraps easily, and even the White cleans well.
Typical MSRP is probably $20USD or more, but Amazon had a deal a while back, so I bought (2) sets @ $10.00 ea.
Chain Reaction had some great prices on some bright colors a week ago...looks like you could still maybe find a deal if the colors float your boat:
Fizik Endurance Classic Handlebar Tape. $8.39 - $9.59
The "Tacky" , which I haven't tried, is even cheaper:
Fizik Performance Tacky Touch Bar Tape $4.79 - $8.39
Durable, nice texture, wraps easily, and even the White cleans well.
Typical MSRP is probably $20USD or more, but Amazon had a deal a while back, so I bought (2) sets @ $10.00 ea.
Chain Reaction had some great prices on some bright colors a week ago...looks like you could still maybe find a deal if the colors float your boat:
Fizik Endurance Classic Handlebar Tape. $8.39 - $9.59
The "Tacky" , which I haven't tried, is even cheaper:
Fizik Performance Tacky Touch Bar Tape $4.79 - $8.39
Last edited by chainwhip; 01-28-20 at 03:51 AM.
Likes For chainwhip:
#6
Hoards Thumbshifters
Join Date: Jul 2010
Location: Signal Mountain, TN
Posts: 1,156
Bikes: '23 Black Mtn MC, '87 Bruce Gordon Chinook, '08 Jamis Aurora, '86 Trek 560, '97 Mongoose Rockadile, & '91 Trek 750
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 246 Post(s)
Liked 333 Times
in
192 Posts
Fizik Microtex. It's very nice. Not much cushion though you may need an underwrap.
#7
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,644
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2607 Post(s)
Liked 1,696 Times
in
935 Posts
Keep in mind, my comments are based on me having nerve damage in one hand- so I prefer/need more padding than just cloth or double wrapped cloth. (I like the look of shellacked cloth tape- but have not put up with a cloth wrap for more than a week.
I really like the Bontrager gel/cork tape. They just no longer make the cool brown stuff I liked.
When my Miyata 1000LT was being built, I chose Ritchey tape- it feels kinda slippy and plasticy.
Last year I tried the Brooks Microfiber tape. It doesn’t seem to lay right- I have to redo it- one of my winter projects.
FWIW- all 3 of those were right around $20 a piece.
I really like the Bontrager gel/cork tape. They just no longer make the cool brown stuff I liked.
When my Miyata 1000LT was being built, I chose Ritchey tape- it feels kinda slippy and plasticy.
Last year I tried the Brooks Microfiber tape. It doesn’t seem to lay right- I have to redo it- one of my winter projects.
FWIW- all 3 of those were right around $20 a piece.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#8
Just call me Carrie
I got some Marque hexagon bar tape that I love. It’s padded, super grippy (even when wet), and comes in crazy colors.
__________________
I was going to have a good signature but apparently I'm too verbose.
I was going to have a good signature but apparently I'm too verbose.
#9
Me duelen las nalgas
Join Date: Aug 2015
Location: Texas
Posts: 13,513
Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 4559 Post(s)
Liked 2,802 Times
in
1,800 Posts
Good bar wrap is much easier to wrap and more forgiving of rewrapping if we need to remove it to adjust the cockpit and want to reuse the wrap.
I've cheaped out on a few wraps from the bargain bins -- Eclypse from REI, Weanas from Amazon -- and it's terrible stuff. The Eclypse "cork" foam tape immediate picked up every speck of lint and dust in town. The Weanas was impossible to wrap. I'm betting the only way to make it work is with heat to melt it into place.
I like Arundel because it's a local company and they make good bar wraps. The plain Gecko type is typical "cork" foam wrap, comfortable and durable. I've reused it a couple of times on my Ironman and it still looks and feels great.
I also like Arundel Synth Gecko, although it's a peculiar wrap. It's 100% silicone, self-sticking and can be reused indefinitely -- it resists taking a set, and after hanging it for a few minutes any curl it developed will straighten out. Very grippy and soft, but thick and tends to look chunky -- like articulated metal conduit for electrical installations, or sausage casing. I mostly use it for test fitting new cockpits so it's easy to unwrap and rewrap to make adjustments. Not such a big deal with threadless stems, but very handy with clamped quill stems that require threaded the handlebar through the quill stem clamp.
Bontrager and Fizik appear to be comparable so I'd grab either of those off the rack at the LBS if I needed it.
I've cheaped out on a few wraps from the bargain bins -- Eclypse from REI, Weanas from Amazon -- and it's terrible stuff. The Eclypse "cork" foam tape immediate picked up every speck of lint and dust in town. The Weanas was impossible to wrap. I'm betting the only way to make it work is with heat to melt it into place.
I like Arundel because it's a local company and they make good bar wraps. The plain Gecko type is typical "cork" foam wrap, comfortable and durable. I've reused it a couple of times on my Ironman and it still looks and feels great.
I also like Arundel Synth Gecko, although it's a peculiar wrap. It's 100% silicone, self-sticking and can be reused indefinitely -- it resists taking a set, and after hanging it for a few minutes any curl it developed will straighten out. Very grippy and soft, but thick and tends to look chunky -- like articulated metal conduit for electrical installations, or sausage casing. I mostly use it for test fitting new cockpits so it's easy to unwrap and rewrap to make adjustments. Not such a big deal with threadless stems, but very handy with clamped quill stems that require threaded the handlebar through the quill stem clamp.
Bontrager and Fizik appear to be comparable so I'd grab either of those off the rack at the LBS if I needed it.
#10
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,605
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10947 Post(s)
Liked 7,474 Times
in
4,181 Posts
3mm thick bar tape- it comes in multiple brands and costs $15-30 depending on color, brand, website, and time of year.
Cannondale Synapse 3mm tape is the exact same thing as Ritchey Pave 3mm tape. The same thing. These are my go to two brands, but there are others too.
The tape wraps easily, stays in place with the silicone strip, and is long lasting.
I have no desire to ride on thin tape that has minimal to no vibration/shock absorption and I have no desire to ride with janky thick homemade solutions.
Cannondale Synapse 3mm tape is the exact same thing as Ritchey Pave 3mm tape. The same thing. These are my go to two brands, but there are others too.
The tape wraps easily, stays in place with the silicone strip, and is long lasting.
I have no desire to ride on thin tape that has minimal to no vibration/shock absorption and I have no desire to ride with janky thick homemade solutions.
#11
Senior Member
These days it's mostly Fizik superlight for me. It's pretty similar to the Ambrosio Bike Ribbon I often used BITD. Also still I like cotton, shellacked or plain. Leaning towards plain lately. I never used to need nor want any padding as a youth, and I didn't ever wear gloves outside of racing either. I find that approach is no longer that comfortable as I slowly am getting more like this... Considering cotton with some padding underneath now.
#12
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,697
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1946 Post(s)
Liked 2,004 Times
in
1,105 Posts
Bike Ribbon Pro from Pink Jersey is my current favorite. Fizik got a bit thick at the edges in the last few years. Not like the original old stuff. The Bike Ribbon lays flat.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
#13
Abuse Magnet
Join Date: Jun 2012
Location: Colorado
Posts: 1,869
Bikes: '91 Mtn Tek Vertical, '74 Raleigh Sports, '72 Raleigh Twenty, '84 Univega Gran Turismo, '09 Surly Karate Monkey, '92 Burley Rock-n-Roll, '86 Miyata 310, '76 Raleigh Shopper
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 151 Post(s)
Liked 174 Times
in
88 Posts
I've used Deda Elementi Mistral on a couple of bikes. I like it...wraps nice, feels good, looks good.
Likes For arex:
#14
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,940
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
Quoted: 1301 Post(s)
Liked 1,903 Times
in
1,137 Posts
I use a layer of foam type tape and the a layer of Benotto tape over it. Finishes out waterproof and over sized for comfort. Not a cheap bar wrap but what is, if it does the job? Smiles, MH
#15
Senior Member
Thread Starter
Join Date: Jun 2012
Location: Central California
Posts: 1,083
Bikes: 2001 LeMond Nevada City, ‘92 Merlin Titanium, '84 Torpado Super Strada, ‘84 Schwinn Tempo, '81 Bianchi Limites, '73 Raleigh Supercourse
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 161 Post(s)
Liked 69 Times
in
41 Posts
I ended up going with Zukka from Amazon. It was 11.99 shipped and looked identical to Marquee Hexagon. It’s comfy and feels grippy enough. Thanks for all the input.
Zukka
Zukka
#16
Senior Member
Join Date: Apr 2017
Location: Los Angeles, CA
Posts: 2,249
Bikes: 1964 Legnano Roma Olympiade, 1973 Raleigh Super Course, 1978 Raleigh Super Course, 1978 Peugeot PR10, 2002 Specialized Allez, 2007 Specialized Roubaix, 2013 Culprit Croz Blade
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 741 Post(s)
Liked 818 Times
in
421 Posts
+1 on the Fizik. I've used the real leather Brooks wrap, kind of pricy, but feels good and has held up well over 3 years. My current favorite is Kingou, $16.50 on Ebay. I have the faux leather, that feels great and has held up well, even after a couple of re-wraps.
Fizik in red.
Fizik yellow, has held up well for several years.
Fizik tape up close. This tape has held up well for 4 or 5 years, feels good too. I had Lizard Skins for awhile, pricy, felt good, but wore out at contact points near the brake hoods, and didn't clean well.
Brooks leather, pricy, but longwearing, feels better over thin foam wrap.
My new fave, Kingou faux leather, nice cush, grippy, has held up well even after re-wraps.
I've tried cloth tape, looks great, feels great when new, but gets dirty fast, and I don't like the shellac look or feel. After a couple years, I replaced this with red Fizik. Still looks good over 2 years later.
Red Fizik good, black foam wrap, BAD.
Fizik in red.
Fizik yellow, has held up well for several years.
Fizik tape up close. This tape has held up well for 4 or 5 years, feels good too. I had Lizard Skins for awhile, pricy, felt good, but wore out at contact points near the brake hoods, and didn't clean well.
Brooks leather, pricy, but longwearing, feels better over thin foam wrap.
My new fave, Kingou faux leather, nice cush, grippy, has held up well even after re-wraps.
I've tried cloth tape, looks great, feels great when new, but gets dirty fast, and I don't like the shellac look or feel. After a couple years, I replaced this with red Fizik. Still looks good over 2 years later.
Red Fizik good, black foam wrap, BAD.
Last edited by Slightspeed; 02-09-20 at 09:47 AM.
#17
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,674
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1372 Post(s)
Likes: 0
Liked 1,749 Times
in
937 Posts
Personally, I have no issue with cheap handlebar tape and that, with the exception of cloth tape now and again, and I tend to use it exclusively. Why? Because I rewrap my handle bar each season. At least, I used to do so but not all that much anymore.
As for the best tape to use today? I really do not know but I do know that anything with a pattern looks out of place on my vintage steeds.
Cheap tape - two bucks a set shipped. I but a dozen sets when I do purchase and will continue to use this cheapo bar wrap for years to come...
As for the best tape to use today? I really do not know but I do know that anything with a pattern looks out of place on my vintage steeds.
Cheap tape - two bucks a set shipped. I but a dozen sets when I do purchase and will continue to use this cheapo bar wrap for years to come...
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
Likes For randyjawa:
#18
Senior Member
Join Date: Jun 2014
Location: Ontario, Canada
Posts: 4,624
Bikes: iele Latina, Miele Suprema, Miele Uno LS, Miele Miele Beta, MMTB, Bianchi Model Unknown, Fiori Venezia, Fiori Napoli, VeloSport Adamas AX
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1324 Post(s)
Liked 927 Times
in
640 Posts
I like cloth tape but I do not like the price or how hard it is to get. Therefore I started using Renfrew Brand Hockey Tape. It looks just like old school cloth tape and is quite durable.
One roll will do at least two handlebars.
Cheers
One roll will do at least two handlebars.
Cheers
Likes For Miele Man:
#19
Senior Member
Join Date: Jul 2018
Location: USA
Posts: 2,190
Bikes: Ti, Mn Cr Ni Mo Nb, Al, C
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 942 Post(s)
Liked 526 Times
in
349 Posts
Brooks synthetic microfiber tape $18 Amazon Prime free shipping. I was going to get the Brooks leather, but now I don’t think I will. These look great and they have 3mm padding.
Likes For jadocs:
#20
Senior Member
Join Date: Aug 2006
Location: Valley Forge: Birthplace of Freedom
Posts: 1,297
Bikes: Novara Safari, CAAD9, WABI Classic, WABI Thunder
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 365 Post(s)
Liked 457 Times
in
240 Posts
Cheap adhesive backed foam tape because that's mostly what I had. As I move forward I'll be upgrading to nicer leather like tape.
__________________
Be watchful, stand firm in the faith, act like men, be strong. Let all that you do be done in love.
Be watchful, stand firm in the faith, act like men, be strong. Let all that you do be done in love.
#22
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,327
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3897 Post(s)
Liked 4,829 Times
in
2,228 Posts
Newbaum's = i appreciate color variety in my cycling life
I generally wear padded gloves.
I generally wear padded gloves.
Last edited by Wildwood; 02-09-20 at 09:15 AM.
Likes For Wildwood:
#23
Senior Member
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,451 Times
in
723 Posts
I use the cheapest generic stuff I can find, and it's fine if you take the time to wrap it right. Sure it takes some wrestling, but I've never had a problem. I refuse to pay more than $10 to wrap bars, unless it's meant to be period-correct cloth.
On my Ron Cooper, for the past four years, I've had "natural cork" which is definitely just foam, bought for $6.75 on Ebay (the kind with no adhesive, which I actually like better). It's been comfortable, hasn't slipped, and got compliments at French Fender Day. I rode a fairly relaxed 80-miler into the wind with it and didn't go numb. I did a tour on which I wore no cycling gloves. It was all just fine. I have the same stuff in matching blue/yellow splash on the front and rear of my Colin Laing tandem. I used to use Cinelli cork, but honestly I can't tell the difference between it and the cheap Ebay stuff. Maybe I'm just not discerning.
On my Ron Cooper, for the past four years, I've had "natural cork" which is definitely just foam, bought for $6.75 on Ebay (the kind with no adhesive, which I actually like better). It's been comfortable, hasn't slipped, and got compliments at French Fender Day. I rode a fairly relaxed 80-miler into the wind with it and didn't go numb. I did a tour on which I wore no cycling gloves. It was all just fine. I have the same stuff in matching blue/yellow splash on the front and rear of my Colin Laing tandem. I used to use Cinelli cork, but honestly I can't tell the difference between it and the cheap Ebay stuff. Maybe I'm just not discerning.
__________________
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
#24
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,327
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3897 Post(s)
Liked 4,829 Times
in
2,228 Posts
Did anyone mention Newbaums', for the color choices???
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
#25
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,602
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3870 Post(s)
Liked 6,461 Times
in
3,194 Posts