My first bike build...
#1
Senior Member
Thread Starter
Join Date: Jan 2013
Location: Livonia, MI (suburban Detroit)
Posts: 519
Bikes: 2013 Specialized Seceur Elite, Soma ES custom build
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
My first bike build...
I started collecting parts for this last spring, and the LOML and my son added a couple of the final touches as Christmas gifts (the Brooks saddle, matching saddle bag & Topeak handlebar bag). Had some time off over the holidays and got 'er all put together, ready for a test ride as soon as I get some halfway-decently warm weather that's at least in the 40's - and yes, I'm a wimp - I'm standing here at my desk in the office in long johns and a wool sweater, shivering - literally!!
Anyway, the last things on the to-do list is to take it out and ride it enough to get everything adjusted right and whacking off some more of the steering tube after I dial-in the stem height, then finding some fenders that will fit. Along with the saddle & bag, the LOML got me a pair of 40mm Tanaka alloy fenders, but they turned out to be too narrow - they rub on the 32mm tires, so I'm going to have to do something else.
This was intended as a light tourer, especially after getting beaten up on my aluminum-frame Specialized during the PALM ride last summer (Pedal Across Lower Michigan). A Soma ES steel frame & fork, Mavic A-119 wheels w/Tiagra hubs and DT-Swiss DB spokes, 32mm Panaracer tires and a Shimano 105 gruppo. I'm hoping that it's better suited to the the third-world crumbling two-tracks that pass for highways in our state.
Anyway, the last things on the to-do list is to take it out and ride it enough to get everything adjusted right and whacking off some more of the steering tube after I dial-in the stem height, then finding some fenders that will fit. Along with the saddle & bag, the LOML got me a pair of 40mm Tanaka alloy fenders, but they turned out to be too narrow - they rub on the 32mm tires, so I'm going to have to do something else.
This was intended as a light tourer, especially after getting beaten up on my aluminum-frame Specialized during the PALM ride last summer (Pedal Across Lower Michigan). A Soma ES steel frame & fork, Mavic A-119 wheels w/Tiagra hubs and DT-Swiss DB spokes, 32mm Panaracer tires and a Shimano 105 gruppo. I'm hoping that it's better suited to the the third-world crumbling two-tracks that pass for highways in our state.
#3
Semper Fi
Join Date: Jan 2008
Posts: 12,943
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 358 Times
in
241 Posts
Steve,
That turned out absolutely beautiful, really nice looking bicycle there. With the fenders it will look like the tourer you have described perfectly. Where is the like icon?
Bill
That turned out absolutely beautiful, really nice looking bicycle there. With the fenders it will look like the tourer you have described perfectly. Where is the like icon?
Bill
__________________
Semper Fi, USMC, 1975-1977
I Can Do All Things Through Him, Who Gives Me Strength. Philippians 4:13
Semper Fi, USMC, 1975-1977
I Can Do All Things Through Him, Who Gives Me Strength. Philippians 4:13
#4
Senior Member
Thread Starter
Join Date: Jan 2013
Location: Livonia, MI (suburban Detroit)
Posts: 519
Bikes: 2013 Specialized Seceur Elite, Soma ES custom build
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
As to the color - I wasn't super enthusiastic about it at first, then when I started visualizing it with black components... and then the decision to go with the gum-wall tires!
What's funny related to the color is that I started this project to have something on which to hang a couple of wheels I built in a wheel-building class I took a bit over a year ago. Trouble is, those were built on Sun CR18 rims. Good wheels, but they were silver, so I ended up building a second set of wheels with black rims to actually go on the bike and the original pair is still hanging on the wall!!
#5
Senior Member
Thread Starter
Join Date: Jan 2013
Location: Livonia, MI (suburban Detroit)
Posts: 519
Bikes: 2013 Specialized Seceur Elite, Soma ES custom build
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks, Bill. Finding a set of fenders that both fit and look good is going to be a challenge. It's pretty tight in there! I was going to go over the alloy fenders with a Scotchbrite pad to give them a "brushed" nickel look, but I may have to end up with something in plastic...
#7
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,821
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1398 Post(s)
Liked 1,343 Times
in
848 Posts
If I could have only one bicycle, it would be a road touring bike with a somewhat relaxed geometry and 32mm tires -- the sort of thing you have just built.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#8
Senior Member
Join Date: Dec 2006
Location: So Cal
Posts: 2,678
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Looks good a very rewarding experience it is to build up your own creation.
Well done enjoy the many wonderful rides you'll get on it.
Well done enjoy the many wonderful rides you'll get on it.
__________________
It may not be fancy but it gets me were I need to go.
https://www.jtgraphics.net/cyclist_bicycles.htm
It may not be fancy but it gets me were I need to go.
https://www.jtgraphics.net/cyclist_bicycles.htm
#9
Senior Member
Join Date: Mar 2006
Location: Montgomery County, Pennsylvania
Posts: 6,489
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 6 Times
in
2 Posts
Nice job. Hope you enjoy each and every ride with it.
__________________
A conclusion is the place where you got tired of thinking. - S. Wright
Favorite rides in the stable: Indy Fab CJ Ti - Colnago MXL - S-Works Roubaix - Habanero Team Issue - Jamis Eclipse carbon/831
A conclusion is the place where you got tired of thinking. - S. Wright
Favorite rides in the stable: Indy Fab CJ Ti - Colnago MXL - S-Works Roubaix - Habanero Team Issue - Jamis Eclipse carbon/831
#10
Senior Member
Thread Starter
Join Date: Jan 2013
Location: Livonia, MI (suburban Detroit)
Posts: 519
Bikes: 2013 Specialized Seceur Elite, Soma ES custom build
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
For those who haven't wrenched much on their bikes, I have to say that going through this process has really improved my knowledge and understanding of how a bike works. It really amazed me as I started out how little attention I'd paid to things like how a rear cog is assembled or how cables are routed, and building wheels is a VERY enjoyable activity - which is why I didn't hesitate to build a second set of wheels that were cosmetically matched to this frame.
#11
Senior Member
Join Date: Jun 2008
Location: In Oregon looking for more hills to ride
Posts: 834
Bikes: 2016 Niner RLT Steel, 2015 GT Grade Carbon 105, 2014 NS Bikes Eccentric, 2013 Norco Sight Killer B-1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 14 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I really like the Panaracer gum wall tires, it gives the bike an old school/retro look. They work well with the rest of the bike.
Thread
Thread Starter
Forum
Replies
Last Post
agmetal
Classic & Vintage
13
03-19-16 07:20 PM
Bandera
Long Distance Competition/Ultracycling, Randonneuring and Endurance Cycling
3
04-20-13 03:44 PM
rootboy
Classic & Vintage
79
08-19-12 04:59 PM
illdthedj
Singlespeed & Fixed Gear
12
01-26-11 07:03 PM