What bottom bracket is this?
#1
Member
Thread Starter
What bottom bracket is this?
This. It seems like "threadless cup three piece bottom bracket". What bottom bracket is this? I'm thinking putting this on my bike which have a one piece crank. The seller says to use a cottered pin crankarm.
Not an exact one piece crank to three piece but it's close.
Not an exact one piece crank to three piece but it's close.
#2
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
If you have a one piece "Ashtabula" crank on your bike https://www.sheldonbrown.com/opc.html, it might be better for you to adapt it to a threaded bottom bracket type crank, using an adapter like this: https://www.harriscyclery.net/produc...apter-1335.htm Then you can use a square taper or other modern bottom bracket/crankset.
Unless you have a cottered crankset (and the cotters to go with it) the linked bottom bracket will do you little good
Unless you have a cottered crankset (and the cotters to go with it) the linked bottom bracket will do you little good