Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Bar end shifter refurbish

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Bar end shifter refurbish

Old 05-23-20, 06:03 AM
  #1  
Thruhiker 
Senior Member
Thread Starter
 
Thruhiker's Avatar
 
Join Date: May 2020
Location: Greencastle Pa
Posts: 108

Bikes: Fuji touring, jeep hybrid Trek 1100

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 44 Post(s)
Liked 17 Times in 14 Posts
Bar end shifter refurbish

Hi all
I'm working on my fuji touring bike mostly cosmetic stuff. My bar end shifter were/are pretty beat up but work fine still. I've filed and sanded the worst scratches and gouges out of them and the repainted useing automotive paint. I dont know what to do about the lever themselves. The rubber grip part has long since torn off and the past couple years I've just used electrical tape. Any other suggestions? Shrink tube does not work due to there shape. Has any one tried plastic dip? What about wrapping with string I think it's called twineing? Thank you
Thruhiker is offline  
Old 05-23-20, 07:34 AM
  #2  
dsbrantjr
Senior Member
 
dsbrantjr's Avatar
 
Join Date: Sep 2010
Location: Roswell, GA
Posts: 7,635

Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 571 Times in 410 Posts
Plast-Dip should work OK but twine should look attractive, especially if you use it to end your bar tape wrap also; a layer of shellac will make it long-lasting. Self-fusing silicone tape may also be worth a try.
dsbrantjr is offline  
Old 05-23-20, 08:27 AM
  #3  
Crankycrank
Senior Member
 
Join Date: Jan 2009
Location: San Diego, CA
Posts: 1,754
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 295 Post(s)
Liked 105 Times in 84 Posts
This maybe. https://velo-orange.com/products/rus...-shifter-cover Also just do a search for "bar end shift lever covers" or some such thing. Microshift has readily available covers if they happen to fit. I like the Plasti-Dip idea. You might have to use 3 or more coatings for it to last.
Crankycrank is offline  
Old 05-23-20, 11:20 AM
  #4  
phughes
Senior Member
 
phughes's Avatar
 
Join Date: Mar 2011
Posts: 1,758
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 468 Post(s)
Liked 258 Times in 165 Posts
Go for twining if you want something unique. For a more comfortable surface, instead of actual twine, you can use a smaller diameter thread or chord.
phughes is offline  
Old 05-23-20, 03:26 PM
  #5  
dsbrantjr
Senior Member
 
dsbrantjr's Avatar
 
Join Date: Sep 2010
Location: Roswell, GA
Posts: 7,635

Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 571 Times in 410 Posts
Some twine ideas here: https://www.hempbasics.com/shop/Cate...ral-hemp-twine
dsbrantjr is offline  
Old 05-23-20, 07:52 PM
  #6  
Miele Man
Senior Member
 
Join Date: Jun 2014
Location: Ontario, Canada
Posts: 4,222

Bikes: iele Latina, Miele Suprema, Miele Uno LS, Miele Miele Beta, MMTB, Bianchi Model Unknown, Fiori Venezia, Fiori Napoli, VeloSport Adamas AX

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1139 Post(s)
Liked 689 Times in 487 Posts
What make are your barend shifters?

Cheers
Miele Man is offline  
Old 05-23-20, 09:31 PM
  #7  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 13,880

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Raleigh Pro, Trek Cycle Cross, Mongoose tomac ATB, GT Bravado ATB, JCP Folder

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2529 Post(s)
Liked 605 Times in 461 Posts
One of the common issues with dip grip and other bonding methods is the bonding won't take a bite to the lever. So besides good cleaning of the surface is essential any way to add some tooth will also help prolong the repair. Andy
__________________
AndrewRStewart
Andrew R Stewart is offline  
Old 05-23-20, 11:02 PM
  #8  
SalsaShark
Senior Member
 
SalsaShark's Avatar
 
Join Date: Nov 2014
Location: Eastern Iowa
Posts: 444

Bikes: 2014 Trek Allant drop bar conversion, modified Schwinn MTN commuter, 2015 Trek 520, Soma ES, Salsa Journeyman

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 102 Post(s)
Liked 159 Times in 76 Posts
I have used plasti-dip on these and it works great. I had previously tried tape, tubes, and other options, but the dip works the best! The paddle is slightly tapered, so it stays put nicely. I simply cleaned the bare lever with alcohol, and did 3 coats of dip. It is more tactile and grippy than the original plastic covers, and seems more durable as well - with years of trouble-free service. You can get the dip in colors, too!

Last edited by SalsaShark; 05-24-20 at 09:38 PM.
SalsaShark is offline  
Old 05-24-20, 09:14 PM
  #9  
Thruhiker 
Senior Member
Thread Starter
 
Thruhiker's Avatar
 
Join Date: May 2020
Location: Greencastle Pa
Posts: 108

Bikes: Fuji touring, jeep hybrid Trek 1100

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 44 Post(s)
Liked 17 Times in 14 Posts
They are shimano dura ace. I think sl bs77 is the part number. I'm going to try the plasti dip. Thanks everyone.
Thruhiker is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.