New frame day!
#1
Junior Member
Thread Starter
New frame day!
Recently my Schwinn Tempo passed away, this is the replacement, a red Marotias pista.
Marotias was a Spanish frame builder , not that well known, he made some frames for Eddy Merckx.
I think this one maybe is one of his late works, after his dead ,Marotias frames were Razesa frames with stickers.
Some Marotias have the characteristic union between the seat stays and seat post, mine not
I think is a pretty good buy, the quill stem is seized though
Marotias is written near the headset
The head tube is pretty long, maybe they wanted an upward position.
It came with Campagnolo G.S. cranks
The frame is numbered at the bottom of the head tube
Some BB drain hole action
Marotias was a Spanish frame builder , not that well known, he made some frames for Eddy Merckx.
I think this one maybe is one of his late works, after his dead ,Marotias frames were Razesa frames with stickers.
Some Marotias have the characteristic union between the seat stays and seat post, mine not
I think is a pretty good buy, the quill stem is seized though
Marotias is written near the headset
The head tube is pretty long, maybe they wanted an upward position.
It came with Campagnolo G.S. cranks
The frame is numbered at the bottom of the head tube
Some BB drain hole action
Likes For Gods lonely man:
#4
Senior Member
Join Date: Oct 2009
Location: Sherwood, OR
Posts: 1,279
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 336 Post(s)
Liked 309 Times
in
180 Posts
Frustrating when the wedge is just rattling around and the stem itself is stuck. If you are lucky, it is just a too-thick coating of paint holding the stem stuck.
I would try penetrating oil first, then 50/50 Acetone/ATF.
I would try penetrating oil first, then 50/50 Acetone/ATF.