ISO / WTB: stem / seat post / crank set
06-01-20, 09:23 AM
#1
buy my bikes
Thread Starter
Join Date: Jun 2014
Location: Michigan
Posts: 1,800
Bikes: my very own customized GUNNAR CrossHairs
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 519 Post(s)
Liked 428 Times
in
249 Posts
ISO / WTB: stem / seat post / crank set
Howdy - I'm planning on purchasing some parts in the next couple of weeks. Before I pull the trigger with my LBS I thought I'd see if anyone had used stuff they were looking to part with. I've been watching the forums here waiting for something to pop, but so far, no joy. If you happen to have parts you are looking to re-cycle, want to get rid of, or need to turn into gold bars for the coming anarchy, let me know. Thanks.
Quill Stem: Ø22.2 by 100mm long (90 ~ 110 probably OK) with Ø25.4mm clamp diameter - prefer NITTO (silver)
- after something on the tall side, like a NITTO Technomic (180mm height) or SOMA Sutro (140mm height)
Seat Post: Ø26.8mm - silver - probably need at least 250mm
Single speed crankset: 170mm length / square taper --- what's the most common, JIS? Is Shimano road mostly JIS? I think I need JIS.
- Preferred: silver and 40t. - not picky though.
Thanks for reading.
Quill Stem: Ø22.2 by 100mm long (90 ~ 110 probably OK) with Ø25.4mm clamp diameter - prefer NITTO (silver)
- after something on the tall side, like a NITTO Technomic (180mm height) or SOMA Sutro (140mm height)
Seat Post: Ø26.8mm - silver - probably need at least 250mm
Single speed crankset: 170mm length / square taper --- what's the most common, JIS? Is Shimano road mostly JIS? I think I need JIS.
- Preferred: silver and 40t. - not picky though.
Thanks for reading.
06-01-20, 10:36 AM
#2
Senior Member
I've got a couple of rider condition Technomics and a super nice Sutro. I will wander out to the garage on my lunch break to check sizing.
__________________
I.C.
I.C.
Likes For Insidious C.:
06-01-20, 03:28 PM
#3
Senior Member
mrv
Soma Sutro: 180 x 100 x 22.2 x 25.4 very good condition $33 shipped
Technomic A: 11(inches) x 90 x 22.2 x 25.4good condition $28 shipped
Technomic B: 9(inches) x 110 x 22.2 x 25.4fair condition- starts getting ugly 1/2 way down quill $23 shipped
edit- I goofed the description. The taller Technomic is fair cond. The less tall Technomic is good cond.
Soma Sutro: 180 x 100 x 22.2 x 25.4 very good condition $33 shipped
Technomic A: 11(inches) x 90 x 22.2 x 25.4
Technomic B: 9(inches) x 110 x 22.2 x 25.4
edit- I goofed the description. The taller Technomic is fair cond. The less tall Technomic is good cond.
__________________
I.C.
I.C.
Last edited by Insidious C.; 06-01-20 at 05:48 PM.
Likes For Insidious C.:
06-01-20, 07:01 PM
#4
buy my bikes
Thread Starter
Join Date: Jun 2014
Location: Michigan
Posts: 1,800
Bikes: my very own customized GUNNAR CrossHairs
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 519 Post(s)
Liked 428 Times
in
249 Posts
Thanks!
06-01-20, 08:16 PM
#5
Senior Member
Join Date: Oct 2011
Location: Fairplay Co
Posts: 9,513
Bikes: Current 79 Nishiki Custum Sport, Jeunet 620, notable previous bikes P.K. Ripper loop tail, Kawahara Laser Lite, Paramount Track full chrome, Raliegh Internatioanl, Motobecan Super Mirage. 59 Crown royak 3 speed
Mentioned: 26 Post(s)
Tagged: 1 Thread(s)
Quoted: 789 Post(s)
Liked 1,739 Times
in
630 Posts
I actually have a seat post and stem that may work for you stem is a vintage SR/Specialized 100mm length with 80mm max stem and the seat post is a nice early kalloy 250mm
I would do $30 shipped for both or $18.00 for the post.
I would do $30 shipped for both or $18.00 for the post.
Likes For zukahn1:
06-02-20, 01:13 AM
#6
Senior Member
Join Date: Dec 2008
Location: Conroe, TX
Posts: 1,620
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 47 Post(s)
Likes: 0
Liked 29 Times
in
14 Posts
I have this Sugino RD crankset that's 170mm with a 42t ring.
https://photos.app.goo.gl/1MDmuVANAD1BruoV6
https://photos.app.goo.gl/1MDmuVANAD1BruoV6
Likes For brockd15:
