Disks not ready
#176
Senior Member
Join Date: Mar 2010
Posts: 1,659
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1247 Post(s)
Liked 1,323 Times
in
674 Posts
the real issue will always be discs are just bad on road bikes , its a fact , road bikes operate at more specific points than other bikes , discs on off road bikes usually work because you want more locking power and rims just get weakened by dirt and sand , road bikes have higher frequency and when riding at higher speeds need an equal and even braking pressure discs can cause deflections in the wheel and throw a rider off, which is why we see so many more crashes in the TDF and world tour on descents , normal turns go from stable to wobbly nightmares because discs without abs are dangerous , you wouldn't want them on a motorbike or car , but people think a locking brake is somehow safe , NOPE , you will end up like Rem turd co flying over a stone wall to your doom , rims are also cheaper and allow a lower entry cost , so more people can ride , and as the industry trends towards discs we will see it hard for the poorer people ro afford the bikes , discs are harder to work on and require way too much effort for the average person whoo just isnt interested in tweaking their breaks all day long , it will be sad in 5 years when a rim brake wheel set no longer exists because everyone wants to buy the new shiney turd , so now we are all forced to ride these crappy components that cost twice as much , and present an even bigger problem , because a bunch of dentists wants to show off on the group ride
Likes For Atlas Shrugged:
#177
Junior Member
Join Date: Mar 2021
Location: Geneva, Switzerland
Posts: 21
Bikes: Rose X-LITE TEAM 4000 '17, Koga Miyata Proracer '81, BMC SLX01 '08, Focus Arriba 3.0 '15
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 6 Times
in
3 Posts
Everyone is entitled to their opinion on this subject, and I reckon there are good reasons for disk or rim depending on who you are, where you ride, how you ride etc... And it's clear there's enough people in both the rim and disk camps to make it a viable market to produce bikes and wheelsets for both application. The issue is, that the manufacturers are not listenning and are forcing their decision on us. Clearly, producing only disk brake bikes in the mid/high end is also a money maker for the industry as a whole. More expensive bikes, more expensive components, more expensive wheels, and greater reliance on the LBS for servicing = obvious decision by the bike industry as a whole.
I just hope that in 5 years time I can still buy a high end wheelset with rim braking and sqewer attachments (thru-axle being the next imposed standard...)
my 2 cents.
I just hope that in 5 years time I can still buy a high end wheelset with rim braking and sqewer attachments (thru-axle being the next imposed standard...)
my 2 cents.
#179
Full Member
Personally, I think disc's are absolutely "ready" and, IMO, essential. Ive always thought rim brakes were an inherently flawed design: anything that requires the wearing away of a structural component of your bike to perform and essential function is flawed.
I've been running mechanical discs on my gravel bike for years and just got a disc-equipped Specialized Tarmac SL6 which has 105 discs on it, which are amazing. I will never go back to rim brakes, on any bike.
Of course, on mountain bikes, discs have been the norm for a long time and you'd be insane to still be running rim brakes.
However, I would say the Pro riders are the last people to need them as they have a steady supply of free wheels.
I've been running mechanical discs on my gravel bike for years and just got a disc-equipped Specialized Tarmac SL6 which has 105 discs on it, which are amazing. I will never go back to rim brakes, on any bike.
Of course, on mountain bikes, discs have been the norm for a long time and you'd be insane to still be running rim brakes.
However, I would say the Pro riders are the last people to need them as they have a steady supply of free wheels.
Likes For Doomrider74:
#180
Senior Member
Join Date: Jul 2020
Posts: 702
Bikes: '23 Poseidon Redwood, '07 Specialized Roubaix Comp Triple, '12 Gravity Fixie, '21 Liv Rove 4, '06? Giant EB Spirit
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 345 Post(s)
Liked 237 Times
in
151 Posts
My point is sponsorships do not necessarily mean the riders are choosing the best equipment. The buying public often falls into the so and so uses this equipment and hes a professional- it must be great stuff! There are many reasons sponsorships are done, unfortunately providing the best equipment isnt necessarily one of them. Sometimes its which riders provide the best marketing opportunities for the companies.
#181
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,520
Bikes: R3 Disc, Haanjo
Mentioned: 354 Post(s)
Tagged: 1 Thread(s)
Quoted: 20810 Post(s)
Liked 9,456 Times
in
4,672 Posts
If it's squealing in dry weather, your pads are contaminated. If you can feel vibrations coming through the bars, something is wrong there, too... warped rotors, loose headset, loose TA, etc.
#182
Senior Member
Join Date: Jul 2009
Posts: 5,945
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3947 Post(s)
Liked 7,291 Times
in
2,945 Posts
But irking a sponsor is usually not done because of financial reasons. Him saying negative things about disc brakes while Factor provides the equipment puts Factor in an awkward position. Irk a sponsor enough and the relationship gets damaged. Damaging the relationship can mean an end to the sponsorship, which becomes a financial issue.
If you think that is going to jeopardize a sponsorship deal, you're dreaming. I doubt the people at Factor gave his disc brake comment more than a shrug.
(Thank goodness he didn't say something really pejorative, like "I'm not 100% sold on wider tires yet.")
#183
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,520
Bikes: R3 Disc, Haanjo
Mentioned: 354 Post(s)
Tagged: 1 Thread(s)
Quoted: 20810 Post(s)
Liked 9,456 Times
in
4,672 Posts
#184
Full Member
#185
Senior Member
Join Date: Nov 2017
Location: Seattle
Posts: 1,952
Bikes: Specialized Roubaix, Canyon Inflite AL SLX, Ibis Ripley AF, Priority Continuum Onyx, Santana Vision, Kent Dual-Drive Tandem
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 871 Post(s)
Liked 726 Times
in
436 Posts
And it's clear there's enough people in both the rim and disk camps to make it a viable market to produce bikes and wheelsets for both application. The issue is, that the manufacturers are not listenning and are forcing their decision on us. Clearly, producing only disk brake bikes in the mid/high end is also a money maker for the industry as a whole.
High-end rim brake wheelsets ought to be around as long as their brake tracks wear out and need replacing. Why would the bike manufacturers sitting in their smoke-filled dark rooms thinking about how to get more money from buyers want to abandon the money from that to settle for the far cheaper disc rotor sales? Clearly, theyve concocted an Apple-level conspiracy to make rim brakes worse after seeing how successful slowing down old iPhones was.
Or maybe it's because people decided that they liked disc brakes more and are spending their money on that tech.
Likes For surak:
#186
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,520
Bikes: R3 Disc, Haanjo
Mentioned: 354 Post(s)
Tagged: 1 Thread(s)
Quoted: 20810 Post(s)
Liked 9,456 Times
in
4,672 Posts
Likes For WhyFi:
#187
Senior Member
Join Date: May 2020
Posts: 490
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 252 Post(s)
Liked 67 Times
in
48 Posts
I go for rim brakes because because it is dead simple to maintain as years, even decades go by. Last thing I want is a fluid in my lines. Yes, disks brake better but can squeal, they are less sightly than rim ones, especially those that have the disk shaped as a number of arches with numerous holes to make them lighter, making it look like the old fashioned window lace curtains in Europe of old
Disks also contribute to bikes looking somewhat stubby, less elegant. Mind you, I also don't like the esthetics of those deep rim wheels, those 32 mm deep (I think) are just about right. But if I saw a deal on a bike that couldn't be refused, I'd settle for those two evils, disks and deep wheels.
#188
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,520
Bikes: R3 Disc, Haanjo
Mentioned: 354 Post(s)
Tagged: 1 Thread(s)
Quoted: 20810 Post(s)
Liked 9,456 Times
in
4,672 Posts
Yup, nothing says "elegant" like rim brake caliper warts hanging off of the fork and seat stays.
Likes For WhyFi: