Pioneer single side power meter not working
05-07-20, 05:29 AM
#1
Newbie
Thread Starter
Join Date: May 2020
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Pioneer single side power meter not working
Hi
I bought an single side Pioneer power meter (crank side) from Facebook marketplace and it is not detected by my GPS Garmin 520.
I replaced the battery and the green light turns on. However, the gps can't detect the pw. I have an exact pw on a durace crank on another bike which works fine with my garmin.
The seller doesn't take responsibility so I have to figure out this myself. I have no idea how this works so if anyone can give me some suggestions that would be great.
I bought an single side Pioneer power meter (crank side) from Facebook marketplace and it is not detected by my GPS Garmin 520.
I replaced the battery and the green light turns on. However, the gps can't detect the pw. I have an exact pw on a durace crank on another bike which works fine with my garmin.
The seller doesn't take responsibility so I have to figure out this myself. I have no idea how this works so if anyone can give me some suggestions that would be great.
05-07-20, 08:37 AM
#2
LR÷P=HR
Join Date: Sep 2019
Location: SF Bay Area
Posts: 2,161
Bikes: 1981 Holdsworth Special, 1993 C-dale MT3000 & 1996 F700CAD3, 2018 Cervelo R3 & 2022 R5, JustGo Runt, Ridley Oval, Kickr Bike 8-)
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 862 Post(s)
Liked 1,195 Times
in
687 Posts
Does the Pioneer also do Bluetooth?
Maybe you can flash the PM firmware from your phone
Barry
EDIT: BTW using BT first will allow you to determine IF ANT+ is even enabled.
Maybe you can flash the PM firmware from your phone
Barry
EDIT: BTW using BT first will allow you to determine IF ANT+ is even enabled.
Last edited by Barry2; 05-07-20 at 10:47 AM. Reason: ANT+ enabled?
