I suck at wrapping handlebars.
#26
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,639
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4682 Post(s)
Liked 5,801 Times
in
2,285 Posts
I cheat and put a couple of small pieces around the brake levers to cover up the spot that is usually missed when your figure 8 doesn't go as well as you thought it would. If you're an expert tape wrapper I'm sure you'd be offended watching me do this, but I've never been called out for it after the fact.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#27
Senior Member
Thread Starter
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,142
Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 677 Post(s)
Liked 460 Times
in
182 Posts
With all the help here I was able to figure out where my mistake had been. One, I've been using a flimsy bike stand leading to 2, not wrapping tight enough. Thanks everyone for the help
#30
Senior Member
Thread Starter
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,142
Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 677 Post(s)
Liked 460 Times
in
182 Posts
I unwrapped both bars and rewrapped them using the same tape and while not perfect they look 100% better.
#31
Senior Member
Join Date: Aug 2013
Posts: 2,321
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 767 Post(s)
Liked 1,898 Times
in
889 Posts
One more thing,
As nice as full coverage can be, don't sweat it too much if there's that gap near the brake levers. I have them on this bike, and I really like the tape on it just the way it is. Had it out for 28 mostly rainy miles today. All smiles. After all, it's just tape.
As nice as full coverage can be, don't sweat it too much if there's that gap near the brake levers. I have them on this bike, and I really like the tape on it just the way it is. Had it out for 28 mostly rainy miles today. All smiles. After all, it's just tape.
#32
Senior Member
Join Date: Nov 2011
Location: Port Angeles, WA
Posts: 7,922
Bikes: A green one, "Ragleigh," or something.
Mentioned: 194 Post(s)
Tagged: 0 Thread(s)
Quoted: 1627 Post(s)
Liked 630 Times
in
356 Posts
You get lucky, every tenth time, IME.
__________________
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
#33
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,503
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7348 Post(s)
Liked 2,474 Times
in
1,437 Posts
I put the front wheel between my legs and face towards the back of the bike. This puts my eyes right over the handlebars. With each wrap, I look at the top and bottom of the bar to make sure the tape is flat and overlaps the right amount.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#35
Senior Member
Join Date: Mar 2007
Location: SF Bay Area, East bay
Posts: 7,662
Bikes: Miyata 618 GT, Marinoni, Kestral 200 2002 Trek 5200, KHS Flite, Koga Miyata, Schwinn Spitfire 5, Mondia Special, Univega Alpina, Miyata team Ti, Santa Cruz Highball
Mentioned: 53 Post(s)
Tagged: 0 Thread(s)
Quoted: 1610 Post(s)
Liked 2,592 Times
in
1,224 Posts
If you wrap right you don't want to use the adhesive back tape. Did work on a friends bike with the white Miami vice taped bars that were ripped and dirty. Reversed the wrapping and he thought I put new tape on.
#36
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,906
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4806 Post(s)
Liked 3,931 Times
in
2,556 Posts
Yup, bike on the floor (though I usually lean it against my sturdy workbench and tape the near side, then turn the bike around)
Starting at the center is a new one for me. Do you start the tape.at the side of the hood then take the rear facing piece and go forward and vice versa? I've always started at the bar end., one full wrap then forward, always wrapping with the tape coming over the top and headed in. First I cut 3 pieces of tape from the end of a previous roll and tape under the hoods. No "X" under the brake, just one pass. Electrical tape at the top to finish, wrapped same direction as the tape and cut just behind the brake cable. (I never unwrap it with my hand while climbing.)
Recent years, I've been putting on two layers of tape. First later uses old tape. Continuous doesn't matter so I just cut all the worn sections out and butt the tape. For me, tape is all about "the ride". I'm an ex-racer. Haven't for many decades but it is still in my blood. I love to climb; as hard as my body will let me. I wear out tape on a regular basis with the heels of my palms, both behind the hoods and behind the drop curve. (And develop deep calluses there.) I no longer go through two plus rolls/summer but still, a lot. Most of my bikes still use black cloth, the tape I raced. (I do have to admit the thin Fizik plastic tape is a bargain. Feels very nice and lasts forever. It's on my geared ti bike.) Two layers now for a little bigger bar to grip with my older hands and a little cushier. Also tape saving. First wear through now doesn't show bare bar.
As interesting as the center start seems, I may never do it because in addition to being more work (gotta get those lengths right and deal with unrolled tape), it makes moving the levers later far harder. (Again, ex-racer here. Fit is paramount. And no, I do not ride Paramounts because the C&V ones did not fit me very well. )
Ben
Starting at the center is a new one for me. Do you start the tape.at the side of the hood then take the rear facing piece and go forward and vice versa? I've always started at the bar end., one full wrap then forward, always wrapping with the tape coming over the top and headed in. First I cut 3 pieces of tape from the end of a previous roll and tape under the hoods. No "X" under the brake, just one pass. Electrical tape at the top to finish, wrapped same direction as the tape and cut just behind the brake cable. (I never unwrap it with my hand while climbing.)
Recent years, I've been putting on two layers of tape. First later uses old tape. Continuous doesn't matter so I just cut all the worn sections out and butt the tape. For me, tape is all about "the ride". I'm an ex-racer. Haven't for many decades but it is still in my blood. I love to climb; as hard as my body will let me. I wear out tape on a regular basis with the heels of my palms, both behind the hoods and behind the drop curve. (And develop deep calluses there.) I no longer go through two plus rolls/summer but still, a lot. Most of my bikes still use black cloth, the tape I raced. (I do have to admit the thin Fizik plastic tape is a bargain. Feels very nice and lasts forever. It's on my geared ti bike.) Two layers now for a little bigger bar to grip with my older hands and a little cushier. Also tape saving. First wear through now doesn't show bare bar.
As interesting as the center start seems, I may never do it because in addition to being more work (gotta get those lengths right and deal with unrolled tape), it makes moving the levers later far harder. (Again, ex-racer here. Fit is paramount. And no, I do not ride Paramounts because the C&V ones did not fit me very well. )
Ben
#37
Senior Member
#38
Full Member
Join Date: Jul 2016
Location: Weston-super-Mare, Somerset, UK
Posts: 433
Bikes: Gitane Course, Paris Sport, Peugeot AO8, Peugeot Bretagne, Peugeot Premiere 85, Peugeot Premiere 86, Peugeot ANC Halfords Team Replica, Peugeot Festina Team Replica, Motobecane Grand Sport, Motobecane Super 15, Raleigh Pro Race, Raleigh Stratos, BSA
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 117 Post(s)
Liked 427 Times
in
90 Posts
I'm not the best at wrapping tape, but it's an art I get better at the more I do.
Interestingly the second side I do every time looks better than the first side - anyone else notice this?
Interestingly the second side I do every time looks better than the first side - anyone else notice this?
#39
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,648
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,703 Times
in
937 Posts
I got pretty good at it- then kind of stopped messing with the bikes... I noticed the last 2 bikes I've wrapped are not so good- just did another one- again... not so good.
I guess I'll need to practice more.
Like redoing the last 2 botched jobs.
I guess I'll need to practice more.
Like redoing the last 2 botched jobs.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#40
smelling the roses
Join Date: Nov 2010
Location: Tixkokob, Yucatán, México
Posts: 15,320
Bikes: 79 Trek 930, 80 Trek 414, 84 Schwinn Letour Luxe (coupled), 92 Schwinn Paramount PDG 5
Mentioned: 104 Post(s)
Tagged: 1 Thread(s)
Quoted: 7081 Post(s)
Liked 901 Times
in
612 Posts
One more thing,
As nice as full coverage can be, don't sweat it too much if there's that gap near the brake levers. I have them on this bike, and I really like the tape on it just the way it is. Had it out for 28 mostly rainy miles today. All smiles. After all, it's just tape.
As nice as full coverage can be, don't sweat it too much if there's that gap near the brake levers. I have them on this bike, and I really like the tape on it just the way it is. Had it out for 28 mostly rainy miles today. All smiles. After all, it's just tape.
#41
Senior Member
Join Date: Aug 2013
Posts: 2,321
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 767 Post(s)
Liked 1,898 Times
in
889 Posts
Gracias, @seedsbelize.
#42
Senior Member
Anyone remember the loop around the brake lever method that used to be used when many levers did not come with hoods? It was sort of a variation of the figure 8 method, and it also worked well with mafac half hoods. It's been so long I've forgotten how to do it. I remember some people hilariously still trying to wrap bars that way when thicker tape came out.
These days I always use cut strips for the gap, and don't bother with a figure 8. It's not needed if you're careful. Besides, there isn't enough tape on a velox roll to do a Cinelli #66 bar if you do that extra loop.
BTW, yeah it's true. In vintage days many bikes were sold brand new with no brake hoods at all.
These days I always use cut strips for the gap, and don't bother with a figure 8. It's not needed if you're careful. Besides, there isn't enough tape on a velox roll to do a Cinelli #66 bar if you do that extra loop.
BTW, yeah it's true. In vintage days many bikes were sold brand new with no brake hoods at all.
#43
Me duelen las nalgas
Join Date: Aug 2015
Location: Texas
Posts: 13,513
Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 4560 Post(s)
Liked 2,802 Times
in
1,800 Posts
Much as I appreciate the Park Tool videos, they tend to be longer than necessary. Here's the most succinct bar wrapping demo I've found. Peter Sagan's tech needs a whopping 2 minutes from start to finish for both sides.
Note that this demo shows wrapping around the brake hoods to cover it, rather than using short strips and wrapping over those. But the basic technique is the same.
The easiest bar wrap I've found is Arundel Synth Gecko. It's 100% silicone, thick, soft, grippy, durable and can be washed and rewrapped many times -- but be careful to avoid cuts and tears against sharp edges around the brake hoods and bar ends. No adhesive backing, the rubbery material sticks to itself about like a Post-It Note. It resists taking a set or permanent curl, so it can be reused without duplicating the previous wrap. When first removed after use it will appear to have taken a set, but it will straighten out within a day or so.
The only downsides are the bulk and weight. It can't be wrapped flat like cloth, cello or some foam/cork tapes, including Arundel's own. Synth Gecko resembles a gooseneck lamp neck or flexible conduit, a bit chunky and sausage-like. But it's so comfy and grippy I prefer it for long rides on rural chipseal and rough pavement. Really tames the road buzz. I use it on my early '90s Trekenstein 5900. The Ironman is already so forgiving I just use regular foam/cork tape -- Arundel, Eclypse, whatever I have in the bin.
Synth Gecko is pricey at $30-$35, but actually a good value because it can be rewrapped. No worries if you need a few tries to get the wrap to your liking.
Note that this demo shows wrapping around the brake hoods to cover it, rather than using short strips and wrapping over those. But the basic technique is the same.
The easiest bar wrap I've found is Arundel Synth Gecko. It's 100% silicone, thick, soft, grippy, durable and can be washed and rewrapped many times -- but be careful to avoid cuts and tears against sharp edges around the brake hoods and bar ends. No adhesive backing, the rubbery material sticks to itself about like a Post-It Note. It resists taking a set or permanent curl, so it can be reused without duplicating the previous wrap. When first removed after use it will appear to have taken a set, but it will straighten out within a day or so.
The only downsides are the bulk and weight. It can't be wrapped flat like cloth, cello or some foam/cork tapes, including Arundel's own. Synth Gecko resembles a gooseneck lamp neck or flexible conduit, a bit chunky and sausage-like. But it's so comfy and grippy I prefer it for long rides on rural chipseal and rough pavement. Really tames the road buzz. I use it on my early '90s Trekenstein 5900. The Ironman is already so forgiving I just use regular foam/cork tape -- Arundel, Eclypse, whatever I have in the bin.
Synth Gecko is pricey at $30-$35, but actually a good value because it can be rewrapped. No worries if you need a few tries to get the wrap to your liking.
#44
Me duelen las nalgas
Join Date: Aug 2015
Location: Texas
Posts: 13,513
Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 4560 Post(s)
Liked 2,802 Times
in
1,800 Posts
Anyone remember the loop around the brake lever method that used to be used when many levers did not come with hoods? It was sort of a variation of the figure 8 method, and it also worked well with mafac half hoods. It's been so long I've forgotten how to do it. I remember some people hilariously still trying to wrap bars that way when thicker tape came out.
These days I always use cut strips for the gap, and don't bother with a figure 8. It's not needed if you're careful. Besides, there isn't enough tape on a velox roll to do a Cinelli #66 bar if you do that extra loop.
BTW, yeah it's true. In vintage days many bikes were sold brand new with no brake hoods at all.
These days I always use cut strips for the gap, and don't bother with a figure 8. It's not needed if you're careful. Besides, there isn't enough tape on a velox roll to do a Cinelli #66 bar if you do that extra loop.
BTW, yeah it's true. In vintage days many bikes were sold brand new with no brake hoods at all.
#45
Senior Member
Join Date: Jun 2014
Location: Ontario, Canada
Posts: 4,624
Bikes: iele Latina, Miele Suprema, Miele Uno LS, Miele Miele Beta, MMTB, Bianchi Model Unknown, Fiori Venezia, Fiori Napoli, VeloSport Adamas AX
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1324 Post(s)
Liked 927 Times
in
640 Posts
Cheers
#46
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,503
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7348 Post(s)
Liked 2,474 Times
in
1,437 Posts
Thank you for that tip. I've started using leather tape for that reason, but there's a big difference between $35 and $55. I'll give it a try. But first, I have some Brooks synthetic tape I'll be trying. It got bad reviews, so we will see.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#47
Senior Member
I am curious. Do you always wrap this way - ie both sides in the same direction? I always reverse the sides so they are mirror images. But I am thinking your way might be cool with striped Benotto.
#48
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,624
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3888 Post(s)
Liked 6,488 Times
in
3,211 Posts
But the bar end plugs it comes with are cool. I put 'em on one of my keepers.
Shoulda gone with honey Fizik.
#49
Me duelen las nalgas
Join Date: Aug 2015
Location: Texas
Posts: 13,513
Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 4560 Post(s)
Liked 2,802 Times
in
1,800 Posts
Here's the Arundel Synth Gecko wrap as of today. I've rewrapped it a few times this year.
I already had generic black foam tape on the bar but wanted a little extra for the weekend rides.
So I did the quick and dirty wrap, top-down, no electrical tape, finishing at the bar ends, using plugs to hold the wraps. Not as elegant but I'm planning to rewrap again soon after replacing the brake cable housings.
It's a meaty looking wrap. Like sausages. Or flexible metal conduit. The other colors would look less meaty than the yellow.
Arundel Synth Gecko wrap on the Trekenstein 5900. Hey, the hi-viz yellow clashes nicely with the purple frame.
I already had generic black foam tape on the bar but wanted a little extra for the weekend rides.
So I did the quick and dirty wrap, top-down, no electrical tape, finishing at the bar ends, using plugs to hold the wraps. Not as elegant but I'm planning to rewrap again soon after replacing the brake cable housings.
It's a meaty looking wrap. Like sausages. Or flexible metal conduit. The other colors would look less meaty than the yellow.
Arundel Synth Gecko wrap on the Trekenstein 5900. Hey, the hi-viz yellow clashes nicely with the purple frame.
#50
Senior Member
Join Date: Nov 2011
Location: Port Angeles, WA
Posts: 7,922
Bikes: A green one, "Ragleigh," or something.
Mentioned: 194 Post(s)
Tagged: 0 Thread(s)
Quoted: 1627 Post(s)
Liked 630 Times
in
356 Posts
It always seems to come out more or less OK, as long as I manage to get both brake levers at more or less the same elevation
__________________
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
Last edited by Lascauxcaveman; 07-23-19 at 12:10 AM.