Can someone school me on Wheelset selection?
#1
Full Member
Thread Starter
Can someone school me on Wheelset selection?
I've spent most of my time on these forums in the C&V section, so I'm a bit of a noob with CX/gravel.
What exactly sets apart a road wheelset from a gravel/cx set? In other words, what's the 'minimum' rim requirements to accommodate gravel tires (32mm+)? I've seen some marketed that had an inside width of 21mm, some as large as 25, etc, etc.
I'd like 700c clincher wheelset with rim braking surface.
I bought a used cx bike that has a tubular wheelset (I hadn't realized there was a difference between tubular and tubeless.. rookie) and I don't love the idea of not being able to easily fix a flat tire if I intend on doing some serious gravel riding. I've done hundreds of miles on a clincher wheelset on gravel, with rarely a pinch flat, so I'm totally good with clincer (or tubeless ready).
What exactly sets apart a road wheelset from a gravel/cx set? In other words, what's the 'minimum' rim requirements to accommodate gravel tires (32mm+)? I've seen some marketed that had an inside width of 21mm, some as large as 25, etc, etc.
I'd like 700c clincher wheelset with rim braking surface.
I bought a used cx bike that has a tubular wheelset (I hadn't realized there was a difference between tubular and tubeless.. rookie) and I don't love the idea of not being able to easily fix a flat tire if I intend on doing some serious gravel riding. I've done hundreds of miles on a clincher wheelset on gravel, with rarely a pinch flat, so I'm totally good with clincer (or tubeless ready).
#2
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
The trend is wider for wider rims, but people have been putting 33mm + tires on road rims forever. I have been racing this season two sets of road clinchers: Mavic Ksyrium SSC and Shimano R-500. These are both under 20mm internal width. I even set up the Shimanos as tubeless with a WTB 37mm Riddler tire and they've worked flawlessly.
#3
Full Member
Thread Starter
The trend is wider for wider rims, but people have been putting 33mm + tires on road rims forever. I have been racing this season two sets of road clinchers: Mavic Ksyrium SSC and Shimano R-500. These are both under 20mm internal width. I even set up the Shimanos as tubeless with a WTB 37mm Riddler tire and they've worked flawlessly.
Likes For dpicare26:
#4
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
I tired to put a 32mm CX tire on an older rim this year, and it just seemed too "tight" trying to squeeze the tube and the tire beads into the rim. Is that just perhaps because it was older (90's) and the internal rim was likely narrower? Would I be able to put the same 32mm tire on this wheelset, for example?
*I'm making an assumption there, but it seems like most CX clinchers are tubeless these days.
Likes For ThermionicScott:
#5
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
I tired to put a 32mm CX tire on an older rim this year, and it just seemed too "tight" trying to squeeze the tube and the tire beads into the rim. Is that just perhaps because it was older (90's) and the internal rim was likely narrower? Would I be able to put the same 32mm tire on this wheelset, for example?
#6
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,617
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10969 Post(s)
Liked 7,495 Times
in
4,191 Posts
I think my rims are 19mm internal. My old ones were 17.5mm and they handled a true 40mm tire perfectly fine.
A modern rim thats 23mm - 25mm external will be good.
A modern rim thats 23mm - 25mm external will be good.
Likes For mstateglfr:
#7
Senior Member
Join Date: Sep 2017
Posts: 7,887
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 6972 Post(s)
Liked 10,971 Times
in
4,692 Posts
OP, where are you in Pennsylvania? If you are a gravel noob, and want a new wheelset, it might be best to go to a good shop and get some advice - and maybe get a custom-built wheelset. (Unless you build your own.)
The best wheelsets I've owned have all been handbuilt. Costs a little more, but worth it.
The best wheelsets I've owned have all been handbuilt. Costs a little more, but worth it.
#8
Full Member
Thread Starter
OP, where are you in Pennsylvania? If you are a gravel noob, and want a new wheelset, it might be best to go to a good shop and get some advice - and maybe get a custom-built wheelset. (Unless you build your own.)
The best wheelsets I've owned have all been handbuilt. Costs a little more, but worth it.
The best wheelsets I've owned have all been handbuilt. Costs a little more, but worth it.
not sure I want to shell out the dough for a custom built set, having upgraded my roadie this spring and the new purchase of a gravel bike. I've got a decent set of Rovals on my Tricross, which I had considered swapping over, but I plan to re-sell the tricross to a friend, and don't think they'd like the tubulars.
#9
Full Member
Thread Starter
ok,so this chart has been useful to me. Not sure why I didn't just check with Sheldon Brown first, anyway..
I suppose that still begs the question, is there anything else that distinguishes a CX wheelset from a road wheelset? Spoke count, etc
I suppose that still begs the question, is there anything else that distinguishes a CX wheelset from a road wheelset? Spoke count, etc
#10
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
#11
Senior Member
That chart looks a little off to me. For example, Bontrager (Trek) released the Aeolus Pro 3V which is aimed at the "high volume road and gravel tire" market (not MTB) and it's a 25mm internal width. If that chart is accurate it says 44c-57c...but most gravel frames max out around 45c or 50c for 700c tires. I just chatted with Trek CSR (because seeing that chart made me nervous since I just bought the 3V) and their official tire size support for the 3V is 32c - 64c.
#12
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
The chart is just about what width tire is safe to use on a given width rim. It doesn't take into account frame or fork clearances. That's a separate consideration.
#13
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
That chart looks a little off to me. For example, Bontrager (Trek) released the Aeolus Pro 3V which is aimed at the "high volume road and gravel tire" market (not MTB) and it's a 25mm internal width. If that chart is accurate it says 44c-57c...but most gravel frames max out around 45c or 50c for 700c tires. I just chatted with Trek CSR (because seeing that chart made me nervous since I just bought the 3V) and their official tire size support for the 3V is 32c - 64c.
#14
Senior Member
Yeah it's misleading as well as old. Because it's implying "safety" issues and so in my case, on a 25mm internal rim, Trek says I can run a 32c on it, but according to that it's "unsafe" to run anything less than 44c! That's such a huge discrepancy.
#15
Senior Member
I had a 700c wheelset custom built for me by Colorado Cyclist. I choose the DT470 rim because it has a 20mm inner width which I think is versatile to run 30-45mm tires. CX wheelsets may be on the narrower side as they're primary designed to run 33mm tires AFAIK. WTB has a chart that represents what combinations of tires/rim width they recommend: https://www.wtb.com/pages/tire-rim-fit-chart#
Beyond width CX wheelsets may have fewer spokes in order to maximize performance/weight rather than durability. There are many opinions on this but i think most all agree that you'll be unlikely to have issues with a well built 28 or 32 spoke wheelset.
Beyond width CX wheelsets may have fewer spokes in order to maximize performance/weight rather than durability. There are many opinions on this but i think most all agree that you'll be unlikely to have issues with a well built 28 or 32 spoke wheelset.
#16
Senior Member
Join Date: Jul 2007
Location: South shore, L.I., NY
Posts: 6,885
Bikes: Flyxii FR322, Cannondale Topstone, Miyata City Liner, Specialized Chisel, Specialized Epic Evo
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 3242 Post(s)
Liked 2,089 Times
in
1,182 Posts
We were running 2.5” mt. bike tires on what are now considered really narrow rims, maybe 19-20 mm wide ? and at 35 psi.
Did that for a few decades with nobody thinking it was not a good idea, cause it was fine.
Did that for a few decades with nobody thinking it was not a good idea, cause it was fine.
Likes For Steve B.:
#17
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,617
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10969 Post(s)
Liked 7,495 Times
in
4,191 Posts
A road wheelset will usually be 130mm or 142mm in the back.
#18
Full Member
Thread Starter
Thanks all for the info. I was able to put a 32mm cx tire on my road wheelset rims, no problem. I think the tube I used prior was too much (32-42mm). Tried a 28/32 today, fit just fine.
#19
Senior Member
Join Date: Jun 2008
Location: Pittsburgh, PA
Posts: 2,468
Bikes: Co-Motion Cappuccino Tandem,'88 Bob Jackson Touring, Co-Motion Cascadia Touring, Open U.P., Ritchie Titanium Breakaway, Frances Cycles SmallHaul cargo bike. Those are the permanent ones; others wander in and out of the stable occasionally as well.
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 427 Post(s)
Likes: 0
Liked 339 Times
in
229 Posts
Gererally for gravel, most folks want at least 19 mm internal width and the closer to 25mm internal the better for a 700c rim. Even wider if riding 650bs.
The new Shimano GRX wheelset is excellent with 21.6mm internal width, 1625 grams weight for the set and cost $419. They have CUP AND CONE bearings too (thank goodness!). The new FSA gravel wheelset is pretty goood too at about the same price as the Shimano and just a few grams heavier but a bit wider and has sealed bearings. HuntMason X is comparable to the FSA set. Hunt is newer but good, about the same price though they ship from England unless you find a local shop like SweetWater Bikes in PA that stocks Hunt in the shop. Sometimes you can get hit with the new import Tarriff though when you import Hunt wheels from UK so be wary if you go that route.
Between these three I'd buy the Shimano myself as they are excellent quality and as light as many $1,000+ carbon wheelsets. As a matter of fact I am buying a set of Shimano wheels this week! The Shimano wheels do not get much attention with all of the botique wheelsets available out there, but if anything like the road wheels they build they should be outstanding, they have been building wheelsets for decades and do not put out any sub standard stuff. Shimano has great warranty backing and are easily serviceable by anyone without need for special sealed bearings.
I currently own a set of the FSAs and two sets of the Hunts mentioned above by the way so I can speak with firsthand experience with each.
The new Shimano GRX wheelset is excellent with 21.6mm internal width, 1625 grams weight for the set and cost $419. They have CUP AND CONE bearings too (thank goodness!). The new FSA gravel wheelset is pretty goood too at about the same price as the Shimano and just a few grams heavier but a bit wider and has sealed bearings. HuntMason X is comparable to the FSA set. Hunt is newer but good, about the same price though they ship from England unless you find a local shop like SweetWater Bikes in PA that stocks Hunt in the shop. Sometimes you can get hit with the new import Tarriff though when you import Hunt wheels from UK so be wary if you go that route.
Between these three I'd buy the Shimano myself as they are excellent quality and as light as many $1,000+ carbon wheelsets. As a matter of fact I am buying a set of Shimano wheels this week! The Shimano wheels do not get much attention with all of the botique wheelsets available out there, but if anything like the road wheels they build they should be outstanding, they have been building wheelsets for decades and do not put out any sub standard stuff. Shimano has great warranty backing and are easily serviceable by anyone without need for special sealed bearings.
I currently own a set of the FSAs and two sets of the Hunts mentioned above by the way so I can speak with firsthand experience with each.
#20
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,617
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10969 Post(s)
Liked 7,495 Times
in
4,191 Posts
The weight was reported as 1720g to 1800g though, at least from what I read on Shimano's site and one of the larger online reviews.
Its a good price for sure. 24h rims simply scare me away due to not wanting to chance breaking and spending more money, even if the profile is designed to support me.
Does your shop have them in stock?...vendors online seem to be out for the most part.
#21
Senior Member
Join Date: Sep 2011
Posts: 4,764
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 1975 Post(s)
Liked 232 Times
in
173 Posts
FWIW running 21mm internal width Stans Crest with 33m tubeless for cyclocross and they've been fine. The rim is more likely to impact roots and ruts etc, mine have quite a bit of superficial damage and require semifrequent truing run at ~25psi with a 180lb rider. They handle the 36-40mm gravel tires much better in the summer when I switch modes
#22
Newbie
Join Date: Mar 2019
Posts: 64
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 32 Post(s)
Likes: 0
Liked 8 Times
in
6 Posts
Gererally for gravel, most folks want at least 19 mm internal width and the closer to 25mm internal the better for a 700c rim. Even wider if riding 650bs.
The new Shimano GRX wheelset is excellent with 21.6mm internal width, 1625 grams weight for the set and cost $419. They have CUP AND CONE bearings too (thank goodness!). The new FSA gravel wheelset is pretty goood too at about the same price as the Shimano and just a few grams heavier but a bit wider and has sealed bearings. HuntMason X is comparable to the FSA set. Hunt is newer but good, about the same price though they ship from England unless you find a local shop like SweetWater Bikes in PA that stocks Hunt in the shop. Sometimes you can get hit with the new import Tarriff though when you import Hunt wheels from UK so be wary if you go that route.
Between these three I'd buy the Shimano myself as they are excellent quality and as light as many $1,000+ carbon wheelsets. As a matter of fact I am buying a set of Shimano wheels this week! The Shimano wheels do not get much attention with all of the botique wheelsets available out there, but if anything like the road wheels they build they should be outstanding, they have been building wheelsets for decades and do not put out any sub standard stuff. Shimano has great warranty backing and are easily serviceable by anyone without need for special sealed bearings.
I currently own a set of the FSAs and two sets of the Hunts mentioned above by the way so I can speak with firsthand experience with each.
The new Shimano GRX wheelset is excellent with 21.6mm internal width, 1625 grams weight for the set and cost $419. They have CUP AND CONE bearings too (thank goodness!). The new FSA gravel wheelset is pretty goood too at about the same price as the Shimano and just a few grams heavier but a bit wider and has sealed bearings. HuntMason X is comparable to the FSA set. Hunt is newer but good, about the same price though they ship from England unless you find a local shop like SweetWater Bikes in PA that stocks Hunt in the shop. Sometimes you can get hit with the new import Tarriff though when you import Hunt wheels from UK so be wary if you go that route.
Between these three I'd buy the Shimano myself as they are excellent quality and as light as many $1,000+ carbon wheelsets. As a matter of fact I am buying a set of Shimano wheels this week! The Shimano wheels do not get much attention with all of the botique wheelsets available out there, but if anything like the road wheels they build they should be outstanding, they have been building wheelsets for decades and do not put out any sub standard stuff. Shimano has great warranty backing and are easily serviceable by anyone without need for special sealed bearings.
I currently own a set of the FSAs and two sets of the Hunts mentioned above by the way so I can speak with firsthand experience with each.
Are you sure about the 1625 gram weight on the GRX wheels? Performance bike has them listed at 1815 grams, Shimano says 951 for the rear and 769 for the front, making it 1720 for the set.
Last edited by gravelED; 12-12-19 at 03:39 PM.
#23
Senior Member
Join Date: Jun 2008
Location: Pittsburgh, PA
Posts: 2,468
Bikes: Co-Motion Cappuccino Tandem,'88 Bob Jackson Touring, Co-Motion Cascadia Touring, Open U.P., Ritchie Titanium Breakaway, Frances Cycles SmallHaul cargo bike. Those are the permanent ones; others wander in and out of the stable occasionally as well.
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 427 Post(s)
Likes: 0
Liked 339 Times
in
229 Posts
The last review I read has them at 1650 g, sorry, not 1625. I was off a bit. Still a great value however. Be sure you are loking at the GRX RX570 set. https://www.cxmagazine.com/shimano-g...10-rx812-rx570 Will be placing an order in a few days... Funny that the weights are seeming to vary so much from source to source... Will have to weigh them myself when they come in...
#24
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,617
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10969 Post(s)
Liked 7,495 Times
in
4,191 Posts
The last review I read has them at 1650 g, sorry, not 1625. I was off a bit. Still a great value however. Be sure you are loking at the GRX RX570 set. https://www.cxmagazine.com/shimano-g...10-rx812-rx570 Will be placing an order in a few days... Funny that the weights are seeming to vary so much from source to source... Will have to weigh them myself when they come in...
agreed that it's odd how much they vary online.