Need a new bike
#1
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Chicago, IL
Posts: 81
Bikes: '23 Marin Muirwods, '90 Specialized Hardrock (gone)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Liked 0 Times
in
0 Posts
Need a new bike
Hey all, It has been a while since I posted to the forum, but my '90 Specialized HardRock was stolen from my garage last week. I'm going to be looking for a new bike to replace it. I'm a big guy at 340lbs. My HardRock had a steel frame that managed to take my weight and held up as a daily commuter bike though I was a little lighter back then.
Basically I'm looking for options for something similar to my HardRock. My kids are going to be transitioning to 2-wheels soon, and I'm going to need something to keep up with them. I also wouldn't mind starting to commute to work again, (if I can find a safe route - there are pretty questionable neighborhoods between my house and work) and shed some of these pounds.
Basically I'm looking for options for something similar to my HardRock. My kids are going to be transitioning to 2-wheels soon, and I'm going to need something to keep up with them. I also wouldn't mind starting to commute to work again, (if I can find a safe route - there are pretty questionable neighborhoods between my house and work) and shed some of these pounds.
#2
Senior Member
Join Date: Jun 2008
Location: Somewhere South
Posts: 1,680
Bikes: Most of my bikes are Single Speed Conversions
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 267 Post(s)
Liked 3,067 Times
in
1,015 Posts
I have an old Hardrock non suspension bike that I love . I’d raised the stem and put riser bars on to make ot more of an upright riding position bike .
Wanting something new and bought a Specialized Roll . The entry level one , with 1X7 gearing . I had it two days and love it . Where I’ve been riding I mostly used three of the gears , haven’t shifted past fifth . 650bx2.3 tires . They look huge but Roll easy . With 14 gauge spokes , I think they’ll be fine for my 285 lbs .
Specialized has some models on sale right now . The one I ordered was a little over $400 .
#3
Senior Member
Join Date: Jun 2008
Location: Somewhere South
Posts: 1,680
Bikes: Most of my bikes are Single Speed Conversions
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 267 Post(s)
Liked 3,067 Times
in
1,015 Posts
This is my Hardrock . I hope you can see the similarity.
#4
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Chicago, IL
Posts: 81
Bikes: '23 Marin Muirwods, '90 Specialized Hardrock (gone)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Liked 0 Times
in
0 Posts
I'm a little hesitant to get a bike with an aluminum frame. But there doesn't seem to be many companies making bikes with CrMO steel frames that are in my price range, under $1000 and preferably closer to $500. Bike I've found so far:
- Surly Cross-Check - I've heard good things about Surly, but starting at $945 it's barely in my price range leaving no room to add any components. Only 10 speed and no climbing gear.
- Brooklyn Bicycle Co Roebling - Seems to be the closest I can find to my Hardrock and at an affordable $520. But haven't heard much about them, and their website doesn't have a ton of details.
- Brooklyn Bicycle Co Lorimer - Similar to the Roebling (other than shorter cockpit and wider saddle, seems identical)
- Retrospect Mantra 7 - Even more affordable but never heard of them and only 7 gears. Recommended weight limit of 250lbs.
- Retrospect Kinney 14-Speed Flat Bar Bike - Closer to my old bike, still no climbing gear. And again, never heard of them. Recommended weight limit of 220lbs.
#5
Senior Member
Join Date: Nov 2012
Location: Panama City, FL
Posts: 251
Bikes: 2018 Specialized AWOL, 2013 Surly Pacer, 2011 Raleigh One-Way, 1973 Raleigh Super Course, 2020 Surly Big Dummy
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 30 Post(s)
Liked 30 Times
in
21 Posts
I just about purchased a Brooklyn, but my wife found a brand new 2011 Raleigh One-Way in 2017 that had never left the store, so I ended up with that. Both of them have 32mm wheels which is good, did you speech to them about a weight limit at all?
#6
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Chicago, IL
Posts: 81
Bikes: '23 Marin Muirwods, '90 Specialized Hardrock (gone)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Liked 0 Times
in
0 Posts
Shot them an email this morning, waiting to hear back.
#7
Senior Member
Join Date: Jun 2008
Location: Somewhere South
Posts: 1,680
Bikes: Most of my bikes are Single Speed Conversions
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 267 Post(s)
Liked 3,067 Times
in
1,015 Posts
If it’s a steel frame you want . Look at an Electra Cruiser 7 . Not the Lux , the Lux is aluminum. Only seven gears but on my Roll , I only have seven and rarely get to fifth . Mostly use 1-4 . .
I’m 285 down from the mid 290’s and have no problem with a modern aluminum framed bike .
The Roll’s ballon tires support a lot of the weight and act like suspension.
I’m 285 down from the mid 290’s and have no problem with a modern aluminum framed bike .
The Roll’s ballon tires support a lot of the weight and act like suspension.
#8
Newbie
Join Date: May 2010
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
This is pretty much what i want to do with my 94' Trek 830 rigid. The bike almost feel slightly too small for me right now. I'm hoping getting it set up to ride upright will help with this. Wanting a new stem but the one that came with it has an integrated brake cable. Not sure how to get around that. Cantilever cable hanger?
#9
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Chicago, IL
Posts: 81
Bikes: '23 Marin Muirwods, '90 Specialized Hardrock (gone)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Liked 0 Times
in
0 Posts
Been wondering if I'm making a mistake by not considering aluminum frames. Back 10 year ago when i decided to rebuild my Hardrock the consensus was that a steel frame was better considering my weight. But now I'm wondering if there have been improvements in the last 10 year for aluminum frames. The mosre research I do, the more i second guess myself.
#10
Senior Member
Join Date: Jun 2008
Location: Somewhere South
Posts: 1,680
Bikes: Most of my bikes are Single Speed Conversions
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 267 Post(s)
Liked 3,067 Times
in
1,015 Posts
This is pretty much what i want to do with my 94' Trek 830 rigid. The bike almost feel slightly too small for me right now. I'm hoping getting it set up to ride upright will help with this. Wanting a new stem but the one that came with it has an integrated brake cable. Not sure how to get around that. Cantilever cable hanger?
#11
Senior Member
Likes For frogbiscuit:
#12
Senior Member
Been wondering if I'm making a mistake by not considering aluminum frames. Back 10 year ago when i decided to rebuild my Hardrock the consensus was that a steel frame was better considering my weight. But now I'm wondering if there have been improvements in the last 10 year for aluminum frames. The mosre research I do, the more i second guess myself.
#13
Senior Member
Join Date: Jul 2009
Posts: 1,753
Bikes: 1986 KHS Fiero, 1989 Trek 950, 1990 Trek 7000, 1991 Gary Fisher Hoo Koo E Koo, 1992 Trek 1400, 1997 Cannondale CAD2 R300, 1998 Cannondale CAD2 R200, 2002 Marin San Rafael, 2006 Cannondale CAAD8 R1000, 2010 Performance Access XCL9R
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 284 Post(s)
Liked 385 Times
in
207 Posts
As a Clyde, admittedly shrinking, I have an aluminum 29er that I never quewtioned if it would support my weight, even at 350 +. Although I quit riding 3 years ago due to an achilles tendon issue, and after fixing that, I felt like I was going to topple over on my indoor bike on a trainer... I wouldn't worry about aluminum frames today.
Likes For 257 roberts:
#15
Junior Member
Join Date: Jul 2016
Location: Southeastern part of PA
Posts: 96
Bikes: 2016 Rivendell Joe Appaloosa, 2017 Handsome Cycles She-Devil
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 33 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Hi, Joe.
If you liked the Hardrock, you can probably find another on Craigslist. I sold mine ('90 also) a year ago. I looked around for replacements. I'm sure I tested over a dozen bikes.
I tested the Jamis Coda and it felt very close in geometry to the hardrock, which was too stretched out for me (I'm female, so female proportions) and was one reason I was replacing HR, so you might find it perfect replacement. It was also zipper than Hardrock. Very nice bike.
I tested a Surly Crosscheck, and that was beefier/heavier.
I tested and bought a Handsome Cycles She-Devil, their step though version. Devil is their mens' version. Of the $500-1000 steel framed bikes I rode, Handsome Cycles was the nicest, along with the Coda.
If you're willing to spend a bit more, Rivendell Clem H (diamond frame), rides fantastically, is beefy but not sluggish at all. Well worth the extra investment if you can swing it, IMO.
If you liked the Hardrock, you can probably find another on Craigslist. I sold mine ('90 also) a year ago. I looked around for replacements. I'm sure I tested over a dozen bikes.
I tested the Jamis Coda and it felt very close in geometry to the hardrock, which was too stretched out for me (I'm female, so female proportions) and was one reason I was replacing HR, so you might find it perfect replacement. It was also zipper than Hardrock. Very nice bike.
I tested a Surly Crosscheck, and that was beefier/heavier.
I tested and bought a Handsome Cycles She-Devil, their step though version. Devil is their mens' version. Of the $500-1000 steel framed bikes I rode, Handsome Cycles was the nicest, along with the Coda.
If you're willing to spend a bit more, Rivendell Clem H (diamond frame), rides fantastically, is beefy but not sluggish at all. Well worth the extra investment if you can swing it, IMO.
Last edited by RECfromPA; 09-09-19 at 01:40 AM.
#16
Junior Member
I was 360 lbs, finally put my foot down, got motivated and bought a Specialized Roll Sport in July. This bike is phenomenal, it does everything. Comfortable and so smooth. I’ve even taken it on single trails, I highly recommend it!!
#18
Senior Member
Join Date: Jul 2003
Location: Union, KY (Near Cincinnati)
Posts: 509
Bikes: '17 Trek FX2, '19 Trek FX 3 Disc
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 108 Post(s)
Liked 214 Times
in
87 Posts
Been wondering if I'm making a mistake by not considering aluminum frames. Back 10 year ago when i decided to rebuild my Hardrock the consensus was that a steel frame was better considering my weight. But now I'm wondering if there have been improvements in the last 10 year for aluminum frames. The mosre research I do, the more i second guess myself.
#19
Señor Member
Join Date: Feb 2013
Posts: 5,066
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 649 Post(s)
Liked 292 Times
in
215 Posts
Aluminum might be a better choice for bigger riders. To deal with the perception that steel is too heavy, many manufacturers make their steel frames lighter than you would want for a clyde. An exception is Surly, whose bikes are built goddamn tough, but not light.
Aluminum is much less dense and so can be considerably overbuilt, which makes them stronger and stiffer, without the company being scared that nobody will buy them because they are too heavy.
Further, I have had 6 frames break under me in my life. Five of those were steel frames. The one aluminum frame was a light road bike that I was riding like a MTB for about 10000 km. I got an identical frame for a replacement and if has held up for at least as much mileage but only on roads.
I only ever owned one aluminum mountain bike (warranty replacement for a broken steel frame) and it didn't fit me well so I sold it. But for the year or so that I was riding it, it was rock solid.
Aluminum is much less dense and so can be considerably overbuilt, which makes them stronger and stiffer, without the company being scared that nobody will buy them because they are too heavy.
Further, I have had 6 frames break under me in my life. Five of those were steel frames. The one aluminum frame was a light road bike that I was riding like a MTB for about 10000 km. I got an identical frame for a replacement and if has held up for at least as much mileage but only on roads.
I only ever owned one aluminum mountain bike (warranty replacement for a broken steel frame) and it didn't fit me well so I sold it. But for the year or so that I was riding it, it was rock solid.
Thread
Thread Starter
Forum
Replies
Last Post
CurvyLeprechaun
Clydesdales/Athenas (200+ lb / 91+ kg)
8
01-03-14 10:41 PM
skadelphius
Commuting
77
08-06-12 04:19 PM