2015 Jamis Allegro Sport Crankset Replacement
08-06-20, 08:07 PM
#1
Newbie
Thread Starter
Join Date: Aug 2020
Location: San Antonio Tx
Posts: 3
Bikes: 2015 Jamis Allegro Sport
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
2015 Jamis Allegro Sport Crankset Replacement
Hello all, new here with my first of many noob questions.
I have a 2015 Jamis Allegro Sport with stripped drive side Crank Arm, going to take it to LBS to see if they can put in a heli coil for the time being but want to replace the crankset if it doesn't last long. Looking for help finding a replacement. Any help will be greatly appreciated. Thanks
Specs:
Cassette SRAM PG 820 8-Speed, 11-32T
Crankset Shimano FC-M171 triple, 48/38/28, 170 mm
BB Set FSA sealed cartridge, 68 x 110.5 mm (BB_UN26(-K)
Spindle Length D-NL (122.5 mm)
I have a 2015 Jamis Allegro Sport with stripped drive side Crank Arm, going to take it to LBS to see if they can put in a heli coil for the time being but want to replace the crankset if it doesn't last long. Looking for help finding a replacement. Any help will be greatly appreciated. Thanks
Specs:
Cassette SRAM PG 820 8-Speed, 11-32T
Crankset Shimano FC-M171 triple, 48/38/28, 170 mm
BB Set FSA sealed cartridge, 68 x 110.5 mm (BB_UN26(-K)
Spindle Length D-NL (122.5 mm)
08-07-20, 04:31 AM
#2
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
The Helicoil threads should be stronger than the original.
08-07-20, 07:20 AM
#3
Newbie
Thread Starter
Join Date: Aug 2020
Location: San Antonio Tx
Posts: 3
Bikes: 2015 Jamis Allegro Sport
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
That's what I been told, now to find someone that will do it. Most bike shop are super busy right now.
08-07-20, 07:37 AM
#4
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
Check with machine shops, the thread you want is 9/16" x 20 tpi, right-hand thread on the right pedal.
