Search
Notices
General Cycling Discussion Have a cycling related question or comment that doesn't fit in one of the other specialty forums? Drop on in and post in here! When possible, please select the forum above that most fits your post!

New or repair?

Thread Tools
 
Search this Thread
 
Old 05-01-21, 09:42 PM
  #1  
Melvang
Senior Member
Thread Starter
 
Join Date: Aug 2018
Location: North East Iowa
Posts: 217

Bikes: Kona Roast, Cannondale R500 CAAD4

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 82 Post(s)
Liked 57 Times in 23 Posts
New or repair?

So, I stopped into my LBS today to see about new jockey wheels for my son's bike. The derailleur in question is Shimano M952, close to 20 year old XTR. I purchased a new Acera rear mech. Looking at it, I thought what the hell, the jockey wheels bolt over from new to old. So, now my question is, keep the period correct functional XTR, or replace the entire thing with the new mech. If I use the XTR and move the jockey wheels over, I will keep the mech in case of a catastrophic failure, or whatever.

Side question related to the same bike but other end of the equation. My son decided to pull too much front brake and went over the handlebars. He is fine, just a little bruising and a small bit of road rash on his elbow. But in the process, he broke the side off the top cover of the shifter. Should I replace it with new low-end stuff (currently Deore XT), or just cover the hole with tape and silicone?
Melvang is offline  
Old 05-01-21, 09:46 PM
  #2  
Gresp15C
Senior Member
 
Gresp15C's Avatar
 
Join Date: Sep 2014
Posts: 3,893
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1062 Post(s)
Liked 665 Times in 421 Posts
If it's a kid sized bike, I'd say, whatever keeps it working, safely, til he outgrows it.

What does he think? He's the one who will be doing the wrenching, right?
Gresp15C is offline  
Old 05-01-21, 10:00 PM
  #3  
Melvang
Senior Member
Thread Starter
 
Join Date: Aug 2018
Location: North East Iowa
Posts: 217

Bikes: Kona Roast, Cannondale R500 CAAD4

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 82 Post(s)
Liked 57 Times in 23 Posts
Originally Posted by Gresp15C
If it's a kid sized bike, I'd say, whatever keeps it working, safely, til he outgrows it.

What does he think? He's the one who will be doing the wrenching, right?
Not a kids sized bike. It is my old Kona. Looking close, the top jockey wheel is enough thicker, I don't think I have seen a kids bike with XTR. But as far as covering the hole, I don't think he will care either way. I am wanting to get him something more appropriate for the riding that he does in the spring.
Melvang is offline  
Likes For Melvang:
Old 05-01-21, 10:18 PM
  #4  
cyccommute 
Mad bike riding scientist
 
cyccommute's Avatar
 
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,485

Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones

Mentioned: 153 Post(s)
Tagged: 1 Thread(s)
Quoted: 6286 Post(s)
Liked 4,329 Times in 2,425 Posts
The jockey wheels are replaceable and the XTR, even a 20 year old one, is a pretty good derailer. Wheels are fairly inexpensive at about $15 a pair. I’d keep the XTR over the Acera.

I suspect what has been broken on the shifter is probably only the gear indicator. You can remove it or just leave it alone and not worry about it. The damage is probably only cosmetic.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!



cyccommute is offline  
Old 05-01-21, 10:36 PM
  #5  
Melvang
Senior Member
Thread Starter
 
Join Date: Aug 2018
Location: North East Iowa
Posts: 217

Bikes: Kona Roast, Cannondale R500 CAAD4

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 82 Post(s)
Liked 57 Times in 23 Posts
Originally Posted by cyccommute
The jockey wheels are replaceable and the XTR, even a 20 year old one, is a pretty good derailer. Wheels are fairly inexpensive at about $15 a pair. I’d keep the XTR over the Acera.

I suspect what has been broken on the shifter is probably only the gear indicator. You can remove it or just leave it alone and not worry about it. The damage is probably only cosmetic.
Any idea where I could find the replacement jockey wheels with the same sealed bearings? The only difference between the fitment of the jockey wheels from the Acera to the XTR, is the top one is a bit thicker, and cheaper bearings/cheaper shields.



The damage to the shifter is just cosmetic. Surprisingly, the indicator is there, but the side of the housing broke.
Melvang is offline  
Old 05-02-21, 08:36 AM
  #6  
cyccommute 
Mad bike riding scientist
 
cyccommute's Avatar
 
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,485

Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones

Mentioned: 153 Post(s)
Tagged: 1 Thread(s)
Quoted: 6286 Post(s)
Liked 4,329 Times in 2,425 Posts
Originally Posted by Melvang
Any idea where I could find the replacement jockey wheels with the same sealed bearings? The only difference between the fitment of the jockey wheels from the Acera to the XTR, is the top one is a bit thicker, and cheaper bearings/cheaper shields.
Tree Fort has them .

The damage to the shifter is just cosmetic. Surprisingly, the indicator is there, but the side of the housing broke.
Ouch! You aren’t supposed to use your face to stop a bike I wouldn’t worry too much about it. The indicator can be removed if it bothers you.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!



cyccommute is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.