Vintage brake lever setup for smaller hands?
#1
Senior Member
Thread Starter
Join Date: May 2008
Location: Toronto, Canada
Posts: 895
Bikes: (shortlist) Cyclops, Marinoni, Mariposa, Air Firday, Pocket Rocket Pro, NWT, SLX Fuso, Claude Pottie (France) x3, Masi Team 3v, Lemond Zurich, Bianchi OS
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 168 Post(s)
Liked 34 Times
in
27 Posts
Vintage brake lever setup for smaller hands?
I am setting up a female friend with a vintage bike. But she struggles to manage the brake levers (which she finds to far out for her to comfortably grasp and pull).
Short of installing cross-style interrupter brakes, is there anything I can do to make the current levers more manageable?Are there any brake levers that are especially suited to riders with smaller hands?
Peter
Short of installing cross-style interrupter brakes, is there anything I can do to make the current levers more manageable?Are there any brake levers that are especially suited to riders with smaller hands?
Peter
#2
Banned
Bitd
Dia Compe made a recurved lever model which was for smaller hands..
some bar making companies pressed an indentation in the inside of the drop curve to make the reach smaller..
some bar making companies pressed an indentation in the inside of the drop curve to make the reach smaller..
#3
Senior Member
Join Date: Aug 2005
Location: Las Vegas, NV
Posts: 932
Bikes: '04 LeMond Buenos Aires, '82 Bianchi Nuova Racing, De Rosa SLX, Bridgestone MB-1, Guerciotti TSX, Torpado Aelle, LeMond Tourmalet 853, Bridgestone Radac
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 101 Post(s)
Liked 46 Times
in
36 Posts
Tektro offers a lever for smaller hands. I have Tektro levers on numerous bikes and haven't bought any in quite awhile, but they've generally cost only about $25.
https://tektro.com/products.php?p=206
https://tektro.com/products.php?p=206
#4
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,094
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4209 Post(s)
Liked 3,875 Times
in
2,315 Posts
I have worked with dozens of women (many also considered "small") and have found that besides the brake lever to bars dimension affecting brake use (and ability to modulate the pull) the seat to bars/levers reach has a lot to do with it. When a person is too far stretched out and they are using their hands to push their upper body up it's harder to then also pull on the brake levers. So while reduced sizr levers are a great upgrade for many ladies out there good set up doesn't stop there (ouch! Pun). If possible, using higher leverage brakes and good pads are further considerations. Andy
__________________
AndrewRStewart
AndrewRStewart
#5
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,790
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3590 Post(s)
Liked 3,400 Times
in
1,934 Posts
Georgena Terry describes a modification to Shimano "brifters" to accommodate smaller hands:
https://georgenaterry.com/small-bicy...s-small-hands/
https://georgenaterry.com/small-bicy...s-small-hands/
#6
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
If the pictures the OP showed are of the bike in question, the brakes are single pivot type which require more hand effort than newer double pivot brakes. Replacing them with more modern brakes would make it easier for the rider.
#7
Senior Member
Join Date: Feb 2007
Posts: 1,441
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 625 Post(s)
Likes: 0
Liked 397 Times
in
275 Posts
I was in the Cupertino bicycle shop purchasing some rims and spokes and while I was waiting to be helped I watched an old guy named Spence modify some ma-fac road levers with a piece of pipe for a young lady picking up a custom bicycle. This happened a little south of 4 decades ago.
Thread
Thread Starter
Forum
Replies
Last Post
ianbrettcooper
Classic & Vintage
131
05-11-20 08:05 AM
lotekmod
Classic & Vintage
10
02-01-15 06:29 AM
Randy T
Classic and Vintage Bicycles: Whats it Worth? Appraisals.
2
02-16-10 11:18 AM