Schwinn High Sierra Fork
#1
Newbie
Thread Starter
Schwinn High Sierra Fork
Hi,
I've just picked up a High Sierra frameset for duty with an Xtracycle. It has roller brake mounts so I'd make it about an '87 model. There's something curious on the fork. On the inside of the legs about 2 in. up from the ends are small screw mounts. The fork has mid blade rack mounts and double threaded eyelets by the axle. But what purpose could the double inside screws be intended for?
Tom
#2
Decrepit Member
They're for the front axle "Lawyer Clips" to keep the front wheel from falling out of the dropouts when some knuckleheaded owner forgets to secure the QR.
Last edited by Scooper; 03-03-14 at 04:47 PM.
#3
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,646
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,699 Times
in
935 Posts
Let's see that High Sierra!
Those are really cool bikes.
Those are really cool bikes.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#4
Newbie
Thread Starter
High Sierra Pics
Thanks Scooper,
Now that I see the drawing of the clip I remember them. As if lawyer lips on the ends weren't enough!
I found the frame on the local CL. It had some rust in the corners but otherwise looked straight. There were some junk wheels with it but otherwise just a frameset. But the bull moose bars were the clincher. I've hooked it up to an Xtracycle that I had along with a sidecar. The car comes off in a couple minutes so the rig can get back to "normal" single track duties. A new U-brake is on the front and a 200mm disk does the job on the Xtracycle end. That's a fishing rod holder on the back.
Cheers,
Tom
Now that I see the drawing of the clip I remember them. As if lawyer lips on the ends weren't enough!
I found the frame on the local CL. It had some rust in the corners but otherwise looked straight. There were some junk wheels with it but otherwise just a frameset. But the bull moose bars were the clincher. I've hooked it up to an Xtracycle that I had along with a sidecar. The car comes off in a couple minutes so the rig can get back to "normal" single track duties. A new U-brake is on the front and a 200mm disk does the job on the Xtracycle end. That's a fishing rod holder on the back.
Cheers,
Tom
#5
Decrepit Member
Very cool setup with the sidecar "platform", Tom. Thanks for the photos.
#6
Senior Member
Join Date: Nov 2011
Location: Port Angeles, WA
Posts: 7,922
Bikes: A green one, "Ragleigh," or something.
Mentioned: 194 Post(s)
Tagged: 0 Thread(s)
Quoted: 1627 Post(s)
Liked 630 Times
in
356 Posts
OMG, the sidecar mounts up using stems! Love that!
__________________
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
#7
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,646
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,699 Times
in
935 Posts
That is mighty cool.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#8
Newbie
Thread Starter
The stems work really well. The top knuckles are left a little loose so the third wheel rides up and down, allowing more normal handling and will pivot all the way up to fit through narrow ways. Actually it stays up with a bungee for going without a load or passenger. For max. loads (rated at 250 lb.) the stems are tightened up forming a rigid tricycle. In some urban environments this thing could take the place of a car!
#9
Decrepit Member
That's a clever setup, and the 250 pound payload is impressive.