Sugino BB Help
#1
Senior Member
Thread Starter
Sugino BB Help
I'm getting ready to go from a Sugino XD triple to a double. I'm just loosing the granny gear. What size would you use for that crank? It's going on a steel frame bike if that makes any difference.
#2
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
Are you just unbolting the granny chainring and keeping the rest of the triple crank or switching to a purpose built double crank completely? Suguino should recommend a suitable length bottom bracket for either.
#3
Senior Member
Thread Starter
All I have now is the crankset. There isn't a BB. All my JIS taper BB spindles are for vintage bikes. So, they're all around 122mm which is way too long.
#4
Banned
Should be a simple Math and measuring ..
your new chainline is between the 2 chainrings rather than the center of the middle of 3.
your new chainline is between the 2 chainrings rather than the center of the middle of 3.
Last edited by fietsbob; 01-30-14 at 09:43 AM.
#5
Insane Bicycle Mechanic
Join Date: Mar 2008
Location: other Vancouver
Posts: 9,843
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 809 Post(s)
Liked 712 Times
in
380 Posts
For a double 107mm might work, depending on chainring size and dimple shape. 110mm will almost certainly work.
__________________
Jeff Wills
Comcast nuked my web page. It will return soon..
Jeff Wills
Comcast nuked my web page. It will return soon..
#6
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
Any way to take it to a co-op or bike shop and try-fit a couple of different bb's to see what works?
#7
Senior Member
#8
Senior Member
Thread Starter
If I interpret you correctly, you currently have a Suguino triple crank and you are just going to unbolt the granny chainring. right? I wonder if the triple, even with the third ring removed, works with the same bb spindle as their purpose built double.
Any way to take it to a co-op or bike shop and try-fit a couple of different bb's to see what works?
Any way to take it to a co-op or bike shop and try-fit a couple of different bb's to see what works?
Thread
Thread Starter
Forum
Replies
Last Post
David Laird
Classic & Vintage
0
04-20-12 08:18 PM
SteelCan
Bicycle Mechanics
10
08-05-10 10:23 AM