FS: Bob Jackson 53/54cm
#1
Dolce far niente
Thread Starter
Join Date: Dec 2004
Location: Northern CA
Posts: 10,704
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Likes: 0
Liked 17 Times
in
14 Posts
FS: Bob Jackson 53/54cm
Another nice little bike from my hoard... a Bob Jackson "Limited Addition". 53cm ctc on the seat tube, 54cm ctc on the top tube. All Dura Ace, except the funky Specialized halfstep/granny triple crank and Mountech FD. Made from 531 Professional tubing. Paint is nice but needs to be cleaned and polished, there are nicks and scratches, as well as a very small ding on the top tube. Tires look near new, and still have some flashing on them. Cinelli bars and stem.
Will need new hoods and bar tape, and will need to be cleaned and tuned. Altogether, is is in nice shape and near ready to ride.
$680 shipped to your door.
Will need new hoods and bar tape, and will need to be cleaned and tuned. Altogether, is is in nice shape and near ready to ride.
$680 shipped to your door.
__________________
"Love is not the dying moan of a distant violin, it’s the triumphant twang of a bedspring."
S. J. Perelman
"Love is not the dying moan of a distant violin, it’s the triumphant twang of a bedspring."
S. J. Perelman
Last edited by bigbossman; 01-27-19 at 10:46 PM.
#2
Occam's Rotor
Join Date: Jul 2013
Posts: 7,248
Mentioned: 61 Post(s)
Tagged: 0 Thread(s)
Quoted: 2366 Post(s)
Liked 2,331 Times
in
1,164 Posts
My size, and I live in Santa Crud. Can you post a photo of the dent?
#5
Occam's Rotor
Join Date: Jul 2013
Posts: 7,248
Mentioned: 61 Post(s)
Tagged: 0 Thread(s)
Quoted: 2366 Post(s)
Liked 2,331 Times
in
1,164 Posts
I put one in the exact same place on my 1981 Miyata ... in 1982.
#6
Dolce far niente
Thread Starter
Join Date: Dec 2004
Location: Northern CA
Posts: 10,704
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Likes: 0
Liked 17 Times
in
14 Posts
Dura Ace hubs, laced to Mavic SUP rims. Straight and true. Not sure what you mean about tire clearance. The tires are 700x23c
__________________
"Love is not the dying moan of a distant violin, it’s the triumphant twang of a bedspring."
S. J. Perelman
"Love is not the dying moan of a distant violin, it’s the triumphant twang of a bedspring."
S. J. Perelman
#7
Dolce far niente
Thread Starter
Join Date: Dec 2004
Location: Northern CA
Posts: 10,704
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Likes: 0
Liked 17 Times
in
14 Posts
Tried to send you a PM but you have PM's disabled.... If you want the bike and you will come pick it up, I'll give you a good discount.
__________________
"Love is not the dying moan of a distant violin, it’s the triumphant twang of a bedspring."
S. J. Perelman
"Love is not the dying moan of a distant violin, it’s the triumphant twang of a bedspring."
S. J. Perelman
#8
Occam's Rotor
Join Date: Jul 2013
Posts: 7,248
Mentioned: 61 Post(s)
Tagged: 0 Thread(s)
Quoted: 2366 Post(s)
Liked 2,331 Times
in
1,164 Posts
I think he means how fat a tire could you cram into the frame? I'm curious too. I'm going to guess 28mm.
One approach I use is to find the smallest gap and measure it with a hex wrench.
One approach I use is to find the smallest gap and measure it with a hex wrench.
#10
Occam's Rotor
Join Date: Jul 2013
Posts: 7,248
Mentioned: 61 Post(s)
Tagged: 0 Thread(s)
Quoted: 2366 Post(s)
Liked 2,331 Times
in
1,164 Posts
Oh, as long as we are being annoying, any idea what year it is?
#11
Dolce far niente
Thread Starter
Join Date: Dec 2004
Location: Northern CA
Posts: 10,704
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Likes: 0
Liked 17 Times
in
14 Posts
See above. If I has a 28 c tire on-hand, I'd mount it and see. If you're seriously interested in the bike and want to send me one, I'll give it a try and let you know.
No idea, but a Reynolds decal PDF I just referenced says 531 Professional tubing was fist made in 1981 and was discontinued in 1988.
__________________
"Love is not the dying moan of a distant violin, it’s the triumphant twang of a bedspring."
S. J. Perelman
"Love is not the dying moan of a distant violin, it’s the triumphant twang of a bedspring."
S. J. Perelman
Last edited by bigbossman; 01-27-19 at 09:38 PM.
#12
Senior Member
Join Date: Sep 2014
Location: Baton Rouge La
Posts: 1,214
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 394 Post(s)
Liked 346 Times
in
230 Posts
Well, I guess I'm not real serious about it at this point. Beautiful bike and my size as well! But I think the 531P is probably not the best tubing choice for me until I loose about 30 lbs.
You might be able to get a picture from the front kind of in line with the brake mounting bolt that would show the relative clearance all around between tire and frame.
In the back, the tightest place is probably between the chain stays and the sides of the tire, might be hard to get a picture of that, but it could be at the brake caliper and the circumference of the tire.
This would probably be useful information to someone considering the bike.
You might be able to get a picture from the front kind of in line with the brake mounting bolt that would show the relative clearance all around between tire and frame.
In the back, the tightest place is probably between the chain stays and the sides of the tire, might be hard to get a picture of that, but it could be at the brake caliper and the circumference of the tire.
This would probably be useful information to someone considering the bike.
#13
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,851
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,057 Times
in
1,256 Posts
Surprised this isn't gone. Long cage DA rear paired with a Specialized halfstep/granny crank. ooh is that a Bob Jackson frame made with Reynolds Pro 531. Delivered?
#14
Occam's Rotor
Join Date: Jul 2013
Posts: 7,248
Mentioned: 61 Post(s)
Tagged: 0 Thread(s)
Quoted: 2366 Post(s)
Liked 2,331 Times
in
1,164 Posts
The only thing keeping me from driving up there now is the Pessimistic Naysayer and Incorrigible Vulture of Ill-Omen who thinks I have enough bikes already.
Can anyone recommend a divorce lawyer?
Can anyone recommend a divorce lawyer?
#15
Dolce far niente
Thread Starter
Join Date: Dec 2004
Location: Northern CA
Posts: 10,704
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Likes: 0
Liked 17 Times
in
14 Posts
C'mon...... I'll make you an offer you can't refuse. lol
__________________
"Love is not the dying moan of a distant violin, it’s the triumphant twang of a bedspring."
S. J. Perelman
"Love is not the dying moan of a distant violin, it’s the triumphant twang of a bedspring."
S. J. Perelman
#16
Dolce far niente
Thread Starter
Join Date: Dec 2004
Location: Northern CA
Posts: 10,704
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Likes: 0
Liked 17 Times
in
14 Posts
Well... I tried to give it a good home here first, but I need this thing gone. Up on eBay now, so if you want it you'd better let me know sooner than later.
__________________
"Love is not the dying moan of a distant violin, it’s the triumphant twang of a bedspring."
S. J. Perelman
"Love is not the dying moan of a distant violin, it’s the triumphant twang of a bedspring."
S. J. Perelman
#17
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,651
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 85 Post(s)
Tagged: 0 Thread(s)
Quoted: 2609 Post(s)
Liked 1,704 Times
in
937 Posts
#18
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,851
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,057 Times
in
1,256 Posts
#19
Senior Member
Join Date: Aug 2010
Location: Utah
Posts: 8,705
Bikes: Paletti,Pinarello Monviso,Duell Vienna,Giordana XL Super,Lemond Maillot Juane.& custom,PDG Paramount,Fuji Opus III,Davidson Impulse,Pashley Guv'nor,Evans,Fishlips,Y-Foil,Softride, Tetra Pro, CAAD8 Optimo,
Mentioned: 157 Post(s)
Tagged: 0 Thread(s)
Quoted: 2333 Post(s)
Liked 5,081 Times
in
1,801 Posts
That's a beauty! I just traded my too small Bob Jackson today for a set of modern Campagnolo Eurus wheels. One day I'll find another in my size.
GLWS!
GLWS!
__________________
Steel is real...and comfy.
Steel is real...and comfy.
#20
Occam's Rotor
Join Date: Jul 2013
Posts: 7,248
Mentioned: 61 Post(s)
Tagged: 0 Thread(s)
Quoted: 2366 Post(s)
Liked 2,331 Times
in
1,164 Posts
#22
Death fork? Naaaah!!
Thank you, Robbie.
You just prevented a divorce.
Top
You just prevented a divorce.
Top
__________________
You know it's going to be a good day when the stem and seatpost come right out.
(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
You know it's going to be a good day when the stem and seatpost come right out.
(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
Thread
Thread Starter
Forum
Replies
Last Post
Steve Whitlatch
Classic and Vintage Sales
20
12-03-18 11:29 PM
Brewsmith
Classic and Vintage Sales
7
08-04-17 05:14 PM