Recommend a classic light touring rando style frame
#1
Full Member
Thread Starter
Join Date: Oct 2009
Location: lake Oswego, OR
Posts: 322
Bikes: Colnago Mix, Dean El Diente Ti S&S, Lynskey Cooper CX Disc Ti S&S, Mondonico Futura Legerro, DeRosa Primato, Tommaisini Tecno, Ciöcc Mokva80, Colnago Classic, Brompton M6L, Bob Jackson Audax End-E
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 116 Post(s)
Liked 0 Times
in
0 Posts
Recommend a classic light touring rando style frame
I like old style, but not necessarily old frames: Lugged, level top tube, 700c wheels, eyelets for fenders and racks front and rear, and hardware for center pull brakes. I'm interested in a Mercian King of Mercia or Audax and others in that price range ($1000 US). Not interested in anything made in Asia. Any recommendations on what else I should be considering?
TIA!
TIA!
#2
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
My recommendation is to up your budget. If you want a new rando/audax style bike not made in Asia, $1k is too low unless that is your budget for the frame. A gunnar sport with fork runs north of $1k.
If you like older bikes, then $1k will get you a heck of a bike. Here's a thread on classic sports touring bikes:
https://www.bikeforums.net/classic-vi...g-bicycle.html
If you like older bikes, then $1k will get you a heck of a bike. Here's a thread on classic sports touring bikes:
https://www.bikeforums.net/classic-vi...g-bicycle.html
#3
Full Member
Thread Starter
Join Date: Oct 2009
Location: lake Oswego, OR
Posts: 322
Bikes: Colnago Mix, Dean El Diente Ti S&S, Lynskey Cooper CX Disc Ti S&S, Mondonico Futura Legerro, DeRosa Primato, Tommaisini Tecno, Ciöcc Mokva80, Colnago Classic, Brompton M6L, Bob Jackson Audax End-E
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 116 Post(s)
Liked 0 Times
in
0 Posts
My recommendation is to up your budget. If you want a new rando/audax style bike not made in Asia, $1k is too low unless that is your budget for the frame. A gunnar sport with fork runs north of $1k.
If you like older bikes, then $1k will get you a heck of a bike. Here's a thread on classic sports touring bikes:
https://www.bikeforums.net/classic-vi...g-bicycle.html
If you like older bikes, then $1k will get you a heck of a bike. Here's a thread on classic sports touring bikes:
https://www.bikeforums.net/classic-vi...g-bicycle.html
Was wondering if anyone knew of other makers like Mercian that were in the same ballpark price-wise. Holdsworths, Hetchins, Bob Jacksons, etc - I have no idea what their prices are, and their websites aren't really helpful. Although I have to admit, I'm not a fan of Hetchins' curly stays, and also not interested in brands like Claud Butler, which is only a shell of the company it once was isn't it? But others I like are the Pashley Clubman Country and the Dawes Galaxy Classic, but unfortunately they only sell them as complete bikes.
I was looking at used bikes, but having a hard time finding one that I like, that is in my size, and in the condition I require. Although I did see a sweet Miyata 1000 and a Centurion Super Touring. But they both sold before I was able to see them.
Thanks for the link BTW- more bike porn!
#4
Senior Member
Join Date: Oct 2015
Location: Silicon Valley
Posts: 235
Bikes: 1978 Motobecane Grand Jubile | 1983 Univega Gran Turismo | 1973 Raleigh Competition
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 54 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I like old style, but not necessarily old frames: Lugged, level top tube, 700c wheels, eyelets for fenders and racks front and rear, and hardware for center pull brakes. I'm interested in a Mercian King of Mercia or Audax and others in that price range ($1000 US). Not interested in anything made in Asia. Any recommendations on what else I should be considering?
TIA!
TIA!
A grand record.
A grand jubile.
https://3.bp.blogspot.com/-qY4m5hgA7...0/IMG_6416.JPG
I have also seen people turn older Raleigh competitions into 650b rando bikes.
#5
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
I'd spring for a gunnar with the OP's budget.
#6
Full Member
Thread Starter
Join Date: Oct 2009
Location: lake Oswego, OR
Posts: 322
Bikes: Colnago Mix, Dean El Diente Ti S&S, Lynskey Cooper CX Disc Ti S&S, Mondonico Futura Legerro, DeRosa Primato, Tommaisini Tecno, Ciöcc Mokva80, Colnago Classic, Brompton M6L, Bob Jackson Audax End-E
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 116 Post(s)
Liked 0 Times
in
0 Posts
It will be an older frame but I would recommend a mid to late 70's Motobecane Grand Jubile or Grand Record. It would be either Vitus 172 or Reynolds 531 double butted tubing depending on the year. They can generally be had for about $200-ish for a bare frame (including headset and BB) or up to $400-500 for a full bike (all assuming very good condition). That would leave you at least half your budget for components, frame modifications, and upgrades of your choice.
A grand record.
A grand jubile.
https://3.bp.blogspot.com/-qY4m5hgA7...0/IMG_6416.JPG
I have also seen people turn older Raleigh competitions into 650b rando bikes.
A grand record.
A grand jubile.
https://3.bp.blogspot.com/-qY4m5hgA7...0/IMG_6416.JPG
I have also seen people turn older Raleigh competitions into 650b rando bikes.
#7
Heck on Wheels
Join Date: Sep 2015
Location: USA Midwest
Posts: 1,055
Bikes: In Signature
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 206 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Velo Orange frames meet many of your requirements, but are designed for cantis or disk. Perhaps someone who has built one up could discuss?
A similar question was asked in 2012.
You might also ask in the long distance competition forum.
A similar question was asked in 2012.
You might also ask in the long distance competition forum.
__________________
"I had a great ride this morning, except for that part about winding up at work."
Bikes so far: 2011 Felt Z85, 80's Raleigh Sovereign (USA), 91 Bianchi Peregrine, 91 Austro-Daimler Pathfinder, 90's Trek 730 Multitrack, STOLEN: 80 Schwinn Voyageur (Japan)
"I had a great ride this morning, except for that part about winding up at work."
Bikes so far: 2011 Felt Z85, 80's Raleigh Sovereign (USA), 91 Bianchi Peregrine, 91 Austro-Daimler Pathfinder, 90's Trek 730 Multitrack, STOLEN: 80 Schwinn Voyageur (Japan)
#8
Senior Member
Join Date: Oct 2015
Location: Silicon Valley
Posts: 235
Bikes: 1978 Motobecane Grand Jubile | 1983 Univega Gran Turismo | 1973 Raleigh Competition
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 54 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I'll keep looking for these- I just need to be patient. Btw, I found a Holdsworth Cyclone at a good discount on Planet X Cycles. Pretty sweet frameset. It's definitely in the running. Holdsworth Cyclone Heritage Frameset | Planet X
Last edited by spock345; 08-17-16 at 12:07 PM.
#9
Señor Member
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,923
Bikes: Mostly English - predominantly Raleighs
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 1491 Post(s)
Liked 1,090 Times
in
638 Posts
Bob Jackson offers several styles of frames, and three that could meet the OP's needs.
Bob Jackson Cycles
Bob Jackson Cycles
__________________
In search of what to search for.
In search of what to search for.
#10
The Drive Side is Within
I'm building up a Claud Butler frame that came to me free. There are many many options that would suit your requirements.
__________________
The bicycle, the bicycle surely, should always be the vehicle of novelists and poets. Christopher Morley
The bicycle, the bicycle surely, should always be the vehicle of novelists and poets. Christopher Morley
#11
Senior Member
Join Date: Jan 2006
Location: Berwyn PA
Posts: 6,408
Bikes: I hate bikes!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 431 Post(s)
Liked 710 Times
in
233 Posts
Yep, I'm looking for the frame and fork only. Got pretty much everything else needed. The $1000 range isn't really a limit though, just sort of a target. The Mercian King of Mercia is £750 which converts to $975. With the posts for center pull brakes and extra water bottle braze-ons, it will probably be another £100. With S&H to the US but no VAT, it would probably be $1200 and change.
Was wondering if anyone knew of other makers like Mercian that were in the same ballpark price-wise. Holdsworths, Hetchins, Bob Jacksons, etc - I have no idea what their prices are, and their websites aren't really helpful. Although I have to admit, I'm not a fan of Hetchins' curly stays, and also not interested in brands like Claud Butler, which is only a shell of the company it once was isn't it? But others I like are the Pashley Clubman Country and the Dawes Galaxy Classic, but unfortunately they only sell them as complete bikes.
I was looking at used bikes, but having a hard time finding one that I like, that is in my size, and in the condition I require. Although I did see a sweet Miyata 1000 and a Centurion Super Touring. But they both sold before I was able to see them.
Thanks for the link BTW- more bike porn!
Was wondering if anyone knew of other makers like Mercian that were in the same ballpark price-wise. Holdsworths, Hetchins, Bob Jacksons, etc - I have no idea what their prices are, and their websites aren't really helpful. Although I have to admit, I'm not a fan of Hetchins' curly stays, and also not interested in brands like Claud Butler, which is only a shell of the company it once was isn't it? But others I like are the Pashley Clubman Country and the Dawes Galaxy Classic, but unfortunately they only sell them as complete bikes.
I was looking at used bikes, but having a hard time finding one that I like, that is in my size, and in the condition I require. Although I did see a sweet Miyata 1000 and a Centurion Super Touring. But they both sold before I was able to see them.
Thanks for the link BTW- more bike porn!
What size you looking for?
#12
Banned
MAP cycles MAP Bicycles | Handmade, Custom Bicycles | Chico, California. Hand made in California to French style.
Mercian is still in Business . Mercian Cycles - Custom Cycle Frames & Cycle Shop
Mercian is still in Business . Mercian Cycles - Custom Cycle Frames & Cycle Shop
#13
Senior Member
Besides Mercian, the obvious one is Bob Jackson. Prices are a bit less than Mercian, especially if one of their "off the peg" frames is right for you. I went for the Mercian in my quest for a light touring bike frame. FWIW they do really nice finish work.
Miyata 1000 as well as the Univega branded version the Specialissima were rare BITD and are even more scarce now. Even so, you might find one if you are patient. Trek 720 and other vintage high end touring bikes of the 70s and 80s were produced in fair numbers, so if you don't mind vintage and waiting they are out there.
Most modern non-boutique touring frames tend to be heavier than the classic touring frames of the past.
Miyata 1000 as well as the Univega branded version the Specialissima were rare BITD and are even more scarce now. Even so, you might find one if you are patient. Trek 720 and other vintage high end touring bikes of the 70s and 80s were produced in fair numbers, so if you don't mind vintage and waiting they are out there.
Most modern non-boutique touring frames tend to be heavier than the classic touring frames of the past.
#14
Senior Member
Join Date: Aug 2009
Location: Berkeley, CA
Posts: 7,244
Bikes: '72 Cilo Pacer, '72 Gitane Gran Tourisme, '72 Peugeot PX10, '73 Speedwell Ti, '74 Peugeot UE-8, '75 Peugeot PR-10L, '80 Colnago Super, '85 De Rosa Pro, '86 Look Equipe 753, '86 Look KG86, '89 Parkpre Team, '90 Parkpre Team MTB, '90 Merlin
Mentioned: 87 Post(s)
Tagged: 0 Thread(s)
Quoted: 834 Post(s)
Liked 2,126 Times
in
555 Posts
I love the work of Mitch Pryor at MAP Cycles, but their pricing page indicates that base custom framesets start at $4000 and go up from there with add-ons.
#15
Full Member
Thread Starter
Join Date: Oct 2009
Location: lake Oswego, OR
Posts: 322
Bikes: Colnago Mix, Dean El Diente Ti S&S, Lynskey Cooper CX Disc Ti S&S, Mondonico Futura Legerro, DeRosa Primato, Tommaisini Tecno, Ciöcc Mokva80, Colnago Classic, Brompton M6L, Bob Jackson Audax End-E
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 116 Post(s)
Liked 0 Times
in
0 Posts
I ride a 55 ETT in a road bike. Not really sure if I should get a slightly longer TT with taller Hat for a Rando. What's the consensus?
Thanks for the link!
Interesting about the speed wobble. Hopefully it was just too much load. I'd use this with a very light load- stuff like going into downtown PDX for lunch, or the doctors etc.
Thanks for the link to Bob Jackson! I did a search for it and i didn't see it. I thougth they were in the same ball park for prices but they are good deal lower. So now, BJ, Mercian, and the Holdsworth Cyclone are at the top of my list.
Thanks everybody for the suggestions and thoughts!
Velo Orange frames meet many of your requirements, but are designed for cantis or disk. Perhaps someone who has built one up could discuss?
A similar question was asked in 2012.
You might also ask in the long distance competition forum.
A similar question was asked in 2012.
You might also ask in the long distance competition forum.
I think the only real issue with the Motobecane frame geometry that I have found is a wobble at high speed with a large load (~40lbs) on the rear wheel. But that is mostly my fault for trying a long descent with a large load of groceries. The only weird thing about Motobecanes is an odd bottom bracket threading. Although at your budget that won't be a problem. They can be either english, swiss, or french. I know that phil wood and IRD makes swiss and french bottom bracket cups. If you are lucky a frame will come with a stronglight or sakae swiss threaded BB. If not then the cheaper IRD option is about $40, $20 for a BB spindle and bearings, $20 for swiss cups.
Besides Mercian, the obvious one is Bob Jackson. Prices are a bit less than Mercian, especially if one of their "off the peg" frames is right for you. I went for the Mercian in my quest for a light touring bike frame. FWIW they do really nice finish work.
Miyata 1000 as well as the Univega branded version the Specialissima were rare BITD and are even more scarce now. Even so, you might find one if you are patient. Trek 720 and other vintage high end touring bikes of the 70s and 80s were produced in fair numbers, so if you don't mind vintage and waiting they are out there.
Most modern non-boutique touring frames tend to be heavier than the classic touring frames of the past.
Miyata 1000 as well as the Univega branded version the Specialissima were rare BITD and are even more scarce now. Even so, you might find one if you are patient. Trek 720 and other vintage high end touring bikes of the 70s and 80s were produced in fair numbers, so if you don't mind vintage and waiting they are out there.
Most modern non-boutique touring frames tend to be heavier than the classic touring frames of the past.
Thanks everybody for the suggestions and thoughts!
#16
Senior Member
Join Date: Sep 2011
Location: Baltimore MD
Posts: 3,332
Bikes: '72 Motobecane Grand Record, '72 Gitane tandem, '72 Raleigh Super Course, '73 Raleigh Gran Sport, '73 Colnago Super, '76 Fiorelli Coppi, '78 Raleigh SBDU Team Pro, '78 Trek 930, '81 Holdsworth Special 650B, '86 Masi GC, ’94 Bridgestone RB-T
Mentioned: 67 Post(s)
Tagged: 0 Thread(s)
Quoted: 786 Post(s)
Liked 520 Times
in
281 Posts
That's what I was going to say. You can find those (if you're patient!) for waay below your budget, which leaves funds in your account to pay for lodging, so you can credit card tour without 50 lbs of camping gear. What size frame are you looking for?
__________________
The man who dies with the most toys…is dead. - Rootboy
The man who dies with the most toys…is dead. - Rootboy
#17
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
50 lbs of camping gear would definitely take us out of the "light touring/rando" category.
#18
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,614
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10964 Post(s)
Liked 7,490 Times
in
4,189 Posts
VO would be an inexpensive route to go and probably build up to be a great looking bike, but the frames are made in Asia. From the OP's posts, the interest is directed towards Anglo made frames only.
#19
Senior Member
Old school touring bikes were fine for multi week loaded (not credit card) touring if you were halfway sensible about it.
#20
Senior Member
#21
Senior Member
IMHO for level top tube bikes go with the traditional sizing of a bigger frame, especially for touring. It will give you a smoother ride. Head tube extensions just look dumb to me. Consider going with something between 'eddy fit' and 'french fit' on the calculator, perhaps a bit closer to eddy. IMO set it up about the same as your regular road bike WRT position. Top tube length, well it depends on you.
#22
Senior Member
Join Date: Jul 2006
Location: STP
Posts: 14,491
Mentioned: 74 Post(s)
Tagged: 0 Thread(s)
Quoted: 821 Post(s)
Liked 255 Times
in
142 Posts
He also has his joint project with Brent Steelman.
Still $3,000 but it comes with a load of nice for the $$$$.
MAP Bicycles | The S&P Randonneur Project | Chico, California
#23
Full Member
Thread Starter
Join Date: Oct 2009
Location: lake Oswego, OR
Posts: 322
Bikes: Colnago Mix, Dean El Diente Ti S&S, Lynskey Cooper CX Disc Ti S&S, Mondonico Futura Legerro, DeRosa Primato, Tommaisini Tecno, Ciöcc Mokva80, Colnago Classic, Brompton M6L, Bob Jackson Audax End-E
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 116 Post(s)
Liked 0 Times
in
0 Posts
This question is for all of you- between the British brands, which one tugs at your heart? Since I'm still just paring the list, and these three are in my field of view, between the Bob Jackson, the Mercian, and the Holdsworth, which brand speaks to you the most? I think I like the Mercian the most, but the price of a BJ WT and the Holdsworth are about half that of the comparable Mercian.
Thanks again!
#24
Full Member
Thread Starter
Join Date: Oct 2009
Location: lake Oswego, OR
Posts: 322
Bikes: Colnago Mix, Dean El Diente Ti S&S, Lynskey Cooper CX Disc Ti S&S, Mondonico Futura Legerro, DeRosa Primato, Tommaisini Tecno, Ciöcc Mokva80, Colnago Classic, Brompton M6L, Bob Jackson Audax End-E
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 116 Post(s)
Liked 0 Times
in
0 Posts
Thanks for setting me straight Sal!!
I owe you due gratis Zorro-man!! Thanks for the link!!!
Bob Jackson offers several styles of frames, and three that could meet the OP's needs.
Bob Jackson Cycles
Bob Jackson Cycles
#25
Senior Member
Join Date: May 2013
Location: Greenwood SC USA
Posts: 2,252
Bikes: 2002 Mercian Vincitore, 1982 Mercian Colorado, 1976 Puch Royal X, 1973 Raleigh Competition, 1971 Gitane Tour de France and others
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 823 Post(s)
Liked 1,395 Times
in
694 Posts
I have no experience with the new Holdsworth, and I have never ridden a Bob Jackson - but I can tell you that a dozen years later I still love my Mercian Vincitore custom road fixed-gear. I got to spec just about everything on it, including a relatively subtle head tube extension, fork blade lamp boss, seat tube angle, etc. I wanted a long-distance road fixed-gear for rides that I haven't yet given up on getting to do, like brevets, long credit card tours, etc. It was worth the money and it has never disappointed me, and I only wish I had more time to ride it.