ISO and For Trade thread parts 2 and 3.
08-10-10, 06:52 PM
#3976
@$#!?&!!$
Join Date: Jun 2008
Location: Green Country, OK
Posts: 686
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
08-10-10, 07:11 PM
#3977
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,514
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2422 Post(s)
Liked 4,396 Times
in
2,093 Posts
WANT:
Chorus FD; braze-on:
Campagnolo Victory or Chorus pedals:
HAVE:
1980's AVA not-death-prone French stem, 22.0 / 25.0
https://www.jaysmarine.com/AVA_4.jpg
Campag Triomphe calipers; for parts or build
https://www.jaysmarine.com/campag_brakes2.jpg
NOS Centerpull yokes - Mafac, Dia-Compe, Weinmann, et cetera
https://www.jaysmarine.com/centerpullyoke.jpg
GB stem, 80mm, high polish
https://www.jaysmarine.com/GB_stem.jpg
Nuovo Record brake calipers
https://www.jaysmarine.com/nuovobrakes1.jpg
Nutted Tektro 556 dual-pivots
https://www.jaysmarine.com/raleigh_interna12.jpg
Simplex bar-con. Only have one, what you see is what'cha get.
https://www.jaysmarine.com/simplex_barcon1.jpg
+ two sets of Shimano 105 triangular pedals in need of new bearings.
-Kurt
Chorus FD; braze-on:
Campagnolo Victory or Chorus pedals:
HAVE:
1980's AVA not-death-prone French stem, 22.0 / 25.0
https://www.jaysmarine.com/AVA_4.jpg
Campag Triomphe calipers; for parts or build
https://www.jaysmarine.com/campag_brakes2.jpg
NOS Centerpull yokes - Mafac, Dia-Compe, Weinmann, et cetera
https://www.jaysmarine.com/centerpullyoke.jpg
GB stem, 80mm, high polish
https://www.jaysmarine.com/GB_stem.jpg
Nuovo Record brake calipers
https://www.jaysmarine.com/nuovobrakes1.jpg
Nutted Tektro 556 dual-pivots
https://www.jaysmarine.com/raleigh_interna12.jpg
Simplex bar-con. Only have one, what you see is what'cha get.
https://www.jaysmarine.com/simplex_barcon1.jpg
+ two sets of Shimano 105 triangular pedals in need of new bearings.
-Kurt
__________________
Last edited by cudak888; 08-11-10 at 08:44 AM.
08-10-10, 08:50 PM
#3980
Junior Member
Join Date: Mar 2010
Location: Locust, NC
Posts: 7
Bikes: Bianchi 1885,Specialized Allez Elite, 1974 Raleigh International, 1950 Schwinn Black Phantom, 1948 Western Flyer Super
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Still looking for one good Campy Ypsilon Oxide Strada 700c, 32 hole rim to finish my bike. Please call or e-mail me if you have one! mikelly@ctc.net or cell 980-622-7459.
Thanks in advance!
Mike
Thanks in advance!
Mike
08-11-10, 03:02 AM
#3981
Senior Member
Join Date: Oct 2004
Location: Toronto, Ontario
Posts: 1,744
Bikes: Miele Azsora, Kuwahara Cascade
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
just a request from those of us with slow internet connections... Could you please include a textual description of things you post? Otherwise it just shows up like
Have:
Have:
08-11-10, 06:30 AM
#3982
Dropped
As a high-speed graphical user, I find multiple large photos obnoxious in that they knock recent offerings back a page...or two (might as well be off the end of the earth). Better to list with descriptions and either a link to photo(s) or a thumbnail photo. At least, that's what I try to do.
08-11-10, 07:14 AM
#3983
Senior Member
Join Date: Oct 2008
Location: Wichita, KS
Posts: 92
Bikes: 1972 P13 Paramount, 1974 P15 Paramount, 1964 Paramount track bike, 1985 Fuji Team, 1983 Fuji Club, 1985 Fuji Serie V, 2007 Trek 5.2 Madone, 1982/83 Schwinn Voyageur, 1982 Takara Challenge, 1979 Motobecane Champion Team, 1985 Panasonic Team Europe 1,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Looking for a maroon suede saddle for a mid 80's Fuji. It can be either style.
John
John
08-11-10, 08:41 AM
#3984
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,514
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2422 Post(s)
Liked 4,396 Times
in
2,093 Posts
As a high-speed graphical user, I find multiple large photos obnoxious in that they knock recent offerings back a page...or two (might as well be off the end of the earth). Better to list with descriptions and either a link to photo(s) or a thumbnail photo. At least, that's what I try to do.
-Kurt
__________________
08-11-10, 09:26 AM
#3985
Dropped
Maybe that's why I don't like it: my modest text posts get buried in a sea of pixels. I suppose we are hardwired to respond more favorably to visual stimuli than sophisticated symbol systems. 
08-11-10, 12:37 PM
#3986
Senior Member
Join Date: Jul 2007
Location: Chattanooga
Posts: 1,154
Bikes: '93 Bridgestone RB-1, '91 Specialized Allez Epic, '85 Raleigh Team Pro, '78 Andre Bertin, early '90s F. Moser Leader AX , '85 Centurion Equipe, '98 Litespeed Tuscany, '89 Klein Quantum, '80 Nishiki Superbe, '83 Peckham, '84 Fuji Opus III
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 12 Times
in
9 Posts
08-11-10, 03:38 PM
#3987
This town needs an enema.
Join Date: Jul 2005
Location: Huntington Beach, Ca.
Posts: 794
Bikes: Bridgestone 400
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Have:
-Nitto Albatross Bars still in plastic.
-Shimano downtube pods/cable stops.
Want:
Fenders to fit 27" wheels.
-Nitto Albatross Bars still in plastic.
-Shimano downtube pods/cable stops.
Want:
Fenders to fit 27" wheels.
08-11-10, 07:05 PM
#3988
Wood
Join Date: Jun 2009
Location: Beaumont, Tx
Posts: 2,293
Bikes: Raleigh Sports: hers. Vianelli Professional & Bridgestone 300: mine
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 12 Times
in
10 Posts
ISO: alloy seat post, 26.0mm,
alloy wheel set, 700c x 28-32 with freewheel threading, plain aluminum, something that won't look out of place on an old black frame, nutted axle if possible.
Have: Sturmey Archer AW, misc. 3 speed stuff, Hercules frame set (make a great fixie!)
alloy wheel set, 700c x 28-32 with freewheel threading, plain aluminum, something that won't look out of place on an old black frame, nutted axle if possible.
Have: Sturmey Archer AW, misc. 3 speed stuff, Hercules frame set (make a great fixie!)
08-11-10, 08:00 PM
#3989
Iconoclast
Join Date: Aug 2009
Location: California
Posts: 3,176
Bikes: Colnago Super, Fuji Opus III, Specialized Rockhopper, Specialized Sirrus (road)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Updated! 
Want:
- Threadless stem(s) 110-120mm. -/+ 17 rise (AKA 73 degree) Prefer the four bolt face plate variety.
- Shimano SPD-SL pedals
- Road frame in the 48-54cm range
- Other offers...
Have:
- Modolo quill stems, 90mm (black) and 120mm (graphite, new)
- Specialized quill stem, missing wedge and bolt, 120mm
- Dia-Compe aero levers
- Dura Ace 7400 non-aero levers (the early ones)
- rear Shimano 600 tricolor dual pivot caliper
- Shimano Exage dual pivot caliper set (tricolor-like finish)
- LOOK delta pedals; several varieties: red, black, gray (Mavic branded)
- toe clips and straps w/ adapter set that is compatible with LOOK delta pedals
- LOOK delta cleats, all varieties; NEW
- Shimano SPD-R pedals (PD-535), no cleats
- Time Criterium pedals (yellow/blue)
- Time Atac Alium pedals, no cleats
- Wellgo SPD pedals with Bianchi name on them (RC-703; blue), no cleats, but they are SPD compatible
- Bar-end shifter adapter plug kit; (turns DT shifters into bar-ends), Dura Ace level
- Campagnolo C-Record retrofriction (just like Simplex) DT shifters
- Dura Ace cranks arms 180mm (FC-7700)
- Shimano Ultegra double crankset 175mm (FC-6500), nice
- Shimano 105 Octalink cartridge double bottom bracket (BB-5500)
- Ritchey Logic/Sugino drive side crank arm 175mm (square taper)
- Various cartridge/cup and spindle bottom brackets, all English thread
- Shimano 105 9s short cage RD, (RD-5500)
- Shimano 105 10s medium cage RD, (RD-5600), new; take-off
- Several Shimano Utegra braze-on FDs, varying condition, double/triple, 6500/6600 series
- Shimano 105 double FD 28.6 clamp-on
- Shimano 105 rear freehub 8-10s, 32h (FH-5501)
- Shimano 600 32h rear freehub, 8-10s
- Mavic tubular front wheel; Mavic 401(?) 28h hub laced to Mavic Mach 2 CD 2 semi-aero rim
- 32h rear Shimano 600 freehub (8-10s) laced to unknown semi-aero tubular rim
- Front aero clincher wheel, cartridge bearing hub, Araya semi-aero hard anodized, laced 28h radial; very light
- Mavic Gl 330 box section tubular rim 32h, almost new
- 27" Mavic Module E clincher rim 36h
- Several Shimano road and mtb cassettes, almost all Ultegra level or higher, most have low miles, 8-10s (mostly 9s), many sizes; large and small, just ask!
- 26.8 x 350mm FSA 2-bolt non-setback seat post, black
- 26.6 Sugino Mighty 2-bolt setback seat post
- Deda Elementi Newton 26 stem: 26.0 clamp, 100mm, -/+ 12 degree rise
- Deda Elementi Magic stem: 31.8 clamp, 120mm, -/+ 12 degree rise
- Ritchey WCS 4-axis stem: 31.8 clamp, 90mm, -/+ 17 degree rise
- 3T threadless stem: 31.8 clamp, 110mm, -/+ 10 degree rise
- Nitto 1" quill threadless stem adapter
- Shimano, Campagnolo, and Ritchey double chain rings; all 53t and 39t double type
- Shimano DT cable stops
- a pair of new Blackburn bottle cages, kind of bluish in color
- a pair of Specialized polished aluminum cages
- King stainless cage
...and a few other things:
Most of the mtb stuff is Shimano Deore XT, some Deore, some XTR, and some Sram. A lot of the parts are new
https://lh5.ggpht.com/_w4APNEt0JOc/TF...8/IMG_0677.JPG
Ultegra FDs, 105 RDs, C-Record shifters, bar-end kit, cable stops
https://lh5.ggpht.com/_w4APNEt0JOc/TF...2/IMG_0683.JPG
Shimano 105 (5500) 32h 8-10s freehub and White Industries 32h 8-10s freehub (135mm spacing)
https://lh3.ggpht.com/_w4APNEt0JOc/TF...2/IMG_0684.JPG
Ritchey WCS 90mm -/+ 17 degree 31.8 clamp stem and Felt 42cm ergo bar
https://lh6.ggpht.com/_w4APNEt0JOc/TF...s/IMG_0661.JPG
FSA 26.8 seat post
https://lh5.ggpht.com/_w4APNEt0JOc/TF...2/IMG_0663.JPG
If you have any questions, just ask. I want to clear this stuff out!
Want:
- Threadless stem(s) 110-120mm. -/+ 17 rise (AKA 73 degree) Prefer the four bolt face plate variety.
- Shimano SPD-SL pedals
- Road frame in the 48-54cm range
- Other offers...
Have:
- Modolo quill stems, 90mm (black) and 120mm (graphite, new)
- Specialized quill stem, missing wedge and bolt, 120mm
- Dia-Compe aero levers
- Dura Ace 7400 non-aero levers (the early ones)
- rear Shimano 600 tricolor dual pivot caliper
- Shimano Exage dual pivot caliper set (tricolor-like finish)
- LOOK delta pedals; several varieties: red, black, gray (Mavic branded)
- toe clips and straps w/ adapter set that is compatible with LOOK delta pedals
- LOOK delta cleats, all varieties; NEW
- Shimano SPD-R pedals (PD-535), no cleats
- Time Criterium pedals (yellow/blue)
- Time Atac Alium pedals, no cleats
- Wellgo SPD pedals with Bianchi name on them (RC-703; blue), no cleats, but they are SPD compatible
- Bar-end shifter adapter plug kit; (turns DT shifters into bar-ends), Dura Ace level
- Campagnolo C-Record retrofriction (just like Simplex) DT shifters
- Dura Ace cranks arms 180mm (FC-7700)
- Shimano Ultegra double crankset 175mm (FC-6500), nice
- Shimano 105 Octalink cartridge double bottom bracket (BB-5500)
- Ritchey Logic/Sugino drive side crank arm 175mm (square taper)
- Various cartridge/cup and spindle bottom brackets, all English thread
- Shimano 105 9s short cage RD, (RD-5500)
- Shimano 105 10s medium cage RD, (RD-5600), new; take-off
- Several Shimano Utegra braze-on FDs, varying condition, double/triple, 6500/6600 series
- Shimano 105 double FD 28.6 clamp-on
- Shimano 105 rear freehub 8-10s, 32h (FH-5501)
- Shimano 600 32h rear freehub, 8-10s
- Mavic tubular front wheel; Mavic 401(?) 28h hub laced to Mavic Mach 2 CD 2 semi-aero rim
- 32h rear Shimano 600 freehub (8-10s) laced to unknown semi-aero tubular rim
- Front aero clincher wheel, cartridge bearing hub, Araya semi-aero hard anodized, laced 28h radial; very light
- Mavic Gl 330 box section tubular rim 32h, almost new
- 27" Mavic Module E clincher rim 36h
- Several Shimano road and mtb cassettes, almost all Ultegra level or higher, most have low miles, 8-10s (mostly 9s), many sizes; large and small, just ask!
- 26.8 x 350mm FSA 2-bolt non-setback seat post, black
- 26.6 Sugino Mighty 2-bolt setback seat post
- Deda Elementi Newton 26 stem: 26.0 clamp, 100mm, -/+ 12 degree rise
- Deda Elementi Magic stem: 31.8 clamp, 120mm, -/+ 12 degree rise
- Ritchey WCS 4-axis stem: 31.8 clamp, 90mm, -/+ 17 degree rise
- 3T threadless stem: 31.8 clamp, 110mm, -/+ 10 degree rise
- Nitto 1" quill threadless stem adapter
- Shimano, Campagnolo, and Ritchey double chain rings; all 53t and 39t double type
- Shimano DT cable stops
- a pair of new Blackburn bottle cages, kind of bluish in color
- a pair of Specialized polished aluminum cages
- King stainless cage
...and a few other things:
Most of the mtb stuff is Shimano Deore XT, some Deore, some XTR, and some Sram. A lot of the parts are new
https://lh5.ggpht.com/_w4APNEt0JOc/TF...8/IMG_0677.JPG
Ultegra FDs, 105 RDs, C-Record shifters, bar-end kit, cable stops
https://lh5.ggpht.com/_w4APNEt0JOc/TF...2/IMG_0683.JPG
Shimano 105 (5500) 32h 8-10s freehub and White Industries 32h 8-10s freehub (135mm spacing)
https://lh3.ggpht.com/_w4APNEt0JOc/TF...2/IMG_0684.JPG
Ritchey WCS 90mm -/+ 17 degree 31.8 clamp stem and Felt 42cm ergo bar
https://lh6.ggpht.com/_w4APNEt0JOc/TF...s/IMG_0661.JPG
FSA 26.8 seat post
https://lh5.ggpht.com/_w4APNEt0JOc/TF...2/IMG_0663.JPG
If you have any questions, just ask. I want to clear this stuff out!
Last edited by rat fink; 09-03-10 at 01:34 PM.
08-12-10, 06:39 AM
#3990
Senior Member
Join Date: Oct 2008
Location: Wichita, KS
Posts: 92
Bikes: 1972 P13 Paramount, 1974 P15 Paramount, 1964 Paramount track bike, 1985 Fuji Team, 1983 Fuji Club, 1985 Fuji Serie V, 2007 Trek 5.2 Madone, 1982/83 Schwinn Voyageur, 1982 Takara Challenge, 1979 Motobecane Champion Team, 1985 Panasonic Team Europe 1,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
08-12-10, 06:44 AM
#3991
Photographer
Join Date: May 2006
Location: The other Cape, Cape Ann
Posts: 3,116
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 105 Post(s)
Liked 98 Times
in
53 Posts
Scott
__________________
ClassicFuji.posthaven.com.archive
IG @scottryder.surf.cycle
IG @scottryder.fine.art
ClassicFuji.posthaven.com.archive
IG @scottryder.surf.cycle
IG @scottryder.fine.art
08-12-10, 07:28 AM
#3992
Senior Member
Join Date: Oct 2008
Location: Wichita, KS
Posts: 92
Bikes: 1972 P13 Paramount, 1974 P15 Paramount, 1964 Paramount track bike, 1985 Fuji Team, 1983 Fuji Club, 1985 Fuji Serie V, 2007 Trek 5.2 Madone, 1982/83 Schwinn Voyageur, 1982 Takara Challenge, 1979 Motobecane Champion Team, 1985 Panasonic Team Europe 1,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
John
Last edited by ggl205; 08-12-10 at 07:32 AM.
08-12-10, 02:35 PM
#3993
Senior Member
Join Date: Jun 2007
Location: WA state
Posts: 4,809
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 13 Post(s)
Likes: 0
Liked 7 Times
in
6 Posts
A few things I might be willing to get rid of...
ITM anatomica handlebars that say bianchi on them, black, 25. something mm clamp so they should work with quill stems
Brand new 27.2mm 350mm FSA carbon fiber seatpost (super sweet)
ITM anatomica handlebars that say bianchi on them, black, 25. something mm clamp so they should work with quill stems
Brand new 27.2mm 350mm FSA carbon fiber seatpost (super sweet)
08-12-10, 08:17 PM
#3994
Junior Member
Join Date: Mar 2010
Location: Locust, NC
Posts: 7
Bikes: Bianchi 1885,Specialized Allez Elite, 1974 Raleigh International, 1950 Schwinn Black Phantom, 1948 Western Flyer Super
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Surely somebody has one of these or a pair laying around. I'd give up to $50 for one good wheel. I'd buy a pair just to get one. Let me know what you have or any leads to where I may get one. Campy Ypsilon Oxide Strada 700c 32 hole.
Thanks,
Mike
Thanks,
Mike
Last edited by mismith; 08-12-10 at 08:21 PM.
08-13-10, 06:40 PM
#3996
Junior Member
Join Date: Apr 2010
Location: Tucson, AZ
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hello all:
I'm so close to finishing my complete overhaul build, but I'm still looking for:
- NON-plastic "shorty" fenders
- Nitto Technomic deluxe stem
- Shimano 600 arabesque rear derailleur, short cage.
- 1" threaded, chromed fork with at least 20cm of steerer tube.
I have: lots of Shimano 600 arabesque, other assorted parts, and of course paypal to equalize any trades.
Cheers
I'm so close to finishing my complete overhaul build, but I'm still looking for:
- NON-plastic "shorty" fenders
- Nitto Technomic deluxe stem
- Shimano 600 arabesque rear derailleur, short cage.
- 1" threaded, chromed fork with at least 20cm of steerer tube.
I have: lots of Shimano 600 arabesque, other assorted parts, and of course paypal to equalize any trades.
Cheers
Last edited by HammerHill; 08-13-10 at 06:59 PM.
08-13-10, 06:41 PM
#3997
Senior Member
Join Date: Oct 2009
Posts: 2,698
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Alright, I'm going to compile all of my needs into one actual post so I'm not destroying this thread's livelihood.
I am ISO:
-Campy vintage parts from the 6-7speed era. Specifically a crankset and headset, NR.
-Used, but nice saddle from the late '70s. Were people racing on Avenirs and the like?
-Frame pump, one for two pegs on the TT, the TT is 58cm, the mounts are approx. 54cm apart. Need a pump that's metal-bodied.
I have:
-6spd UG cassette
-Specialized Sport oldschool mountain bike shoes. They're size 45, 11.5, but fit my 10.5 feet like tight 10.5 shoes.
-A bike's worth of components, including some old school clamp on Shimano shifters with cool hoods, Schwinn Approved long reach brakes, Shimano Titlist FD, Weinnman brake levers, Ideale 80 saddle, and so on.
-Random wheels including a Suzue sealed bearing hub laced to a Mavic something-or-other, and a generic rear wheel with a freewheel that can be parted.
-I can scrounge up a bunch of other stuff as well, so let me know what you need!
I am ISO:
-Campy vintage parts from the 6-7speed era. Specifically a crankset and headset, NR.
-Used, but nice saddle from the late '70s. Were people racing on Avenirs and the like?
-Frame pump, one for two pegs on the TT, the TT is 58cm, the mounts are approx. 54cm apart. Need a pump that's metal-bodied.
I have:
-6spd UG cassette
-Specialized Sport oldschool mountain bike shoes. They're size 45, 11.5, but fit my 10.5 feet like tight 10.5 shoes.
-A bike's worth of components, including some old school clamp on Shimano shifters with cool hoods, Schwinn Approved long reach brakes, Shimano Titlist FD, Weinnman brake levers, Ideale 80 saddle, and so on.
-Random wheels including a Suzue sealed bearing hub laced to a Mavic something-or-other, and a generic rear wheel with a freewheel that can be parted.
-I can scrounge up a bunch of other stuff as well, so let me know what you need!
Last edited by DRietz; 08-13-10 at 11:29 PM.
08-14-10, 06:50 PM
#3998
Senior Member
Join Date: Feb 2009
Location: san leandro
Posts: 1,344
Bikes: enough bikes to qualify for Hoarders......
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Need GB Rando bars for a 75/76 Raleigh Grand Sport. I have Ava bars, various calipers and cash.
Also needed a left 600 Arabesque crank arm in 170mm to complete a set.
Also needed a left 600 Arabesque crank arm in 170mm to complete a set.
08-14-10, 08:20 PM
#3999
Steel Member
Join Date: Jul 2008
Location: Knoxville, TN
Posts: 1,427
Bikes: N + 1
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I have a 59cm Bianchi road bike - '80s vintage, 14 speed (original, I guess), Columbus Formula Two tubing, frame paint shows wear & general "patina" but no flaws like dents, dings or accident damage.
I'm looking for the same or basically similar (but made in Italy & Columbus) bike in 55-56cm and would prefer to just do a frame swap with someone. trade frame/fork (and probably headset & BB) 59cm for 55/56cm.
Here's pictures of my bike...
I'm looking for the same or basically similar (but made in Italy & Columbus) bike in 55-56cm and would prefer to just do a frame swap with someone. trade frame/fork (and probably headset & BB) 59cm for 55/56cm.
Here's pictures of my bike...
08-15-10, 06:44 AM
#4000
can't member
Join Date: Jan 2005
Location: Iowa City
Posts: 1,742
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Likes: 0
Liked 9 Times
in
6 Posts
I have several tall Reynolds 531 frames (Gitane TDF, PX-10, Raleigh Gran Sport & SC, Trek 620) in the 24.5"-25.5" range. I'm looking to trade for a good quality 110/74 crankset in 180mm.