Help removing rear cassette (SEE PIC)
#1
Newbie
Thread Starter
Join Date: Mar 2024
Posts: 1
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Help removing rear cassette (SEE PIC)
I need help removing the rear casette from a sparta ion wheel. I have the tool that fits in the casette and a chain whip, i tried but it is not moving, what is the correct method?
#2
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1608 Post(s)
Liked 2,216 Times
in
1,103 Posts
@Rooster Ren - Welcome to BF
1. Pictures are needed, either a link to a web hosted site or post it in you albums under your profile
2. You may have a freewheel instead of a cassette, don't know without knowing more.
3. If you want to remove the sprockets, it is easy if you have a cassette but need two chain whips for a freewheel.
4.A cassette should come off easily with a retaining ring with a counter clock rotation. The tool is typically splined
5. If it is a freewheel, the tool could have splines or lugs in quantity of 2 or four.
Read this: Shimano Cassettes & Freehubs (sheldonbrown.com)
1. Pictures are needed, either a link to a web hosted site or post it in you albums under your profile
2. You may have a freewheel instead of a cassette, don't know without knowing more.
3. If you want to remove the sprockets, it is easy if you have a cassette but need two chain whips for a freewheel.
4.A cassette should come off easily with a retaining ring with a counter clock rotation. The tool is typically splined
5. If it is a freewheel, the tool could have splines or lugs in quantity of 2 or four.
Read this: Shimano Cassettes & Freehubs (sheldonbrown.com)
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
#3
Senior Member
Join Date: Apr 2011
Posts: 7,067
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 4409 Post(s)
Liked 1,565 Times
in
1,027 Posts
Tried looking at specs on the Sparta website: No Ion model listed, no specs under any bike. But many are 7 speed, and those are usually freewheels, not cassettes. Freewheels need a freewheel tool and a wrench - no chain whip.
Likes For Kontact:
#4
Forum Moderator
Join Date: Jul 2007
Location: Kalamazoo MI
Posts: 20,650
Bikes: Fuji SL2.1 Carbon Di2 Cannondale Synapse Alloy 4 Trek Checkpoint ALR-5 Viscount Aerospace Pro Colnago Classic Rabobank Schwinn Waterford PMount Raleigh C50 Cromoly Hybrid Legnano Tipo Roma Pista
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 3091 Post(s)
Liked 6,601 Times
in
3,785 Posts
__________________
#5
Senior Member
Join Date: Apr 2011
Posts: 7,067
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 4409 Post(s)
Liked 1,565 Times
in
1,027 Posts
That's a freewheel. Tool in freewheel, wrench on tool, hold the wheel and turn counterclockwise. No chainwhip.
Likes For Kontact:
#6
Senior Member
Join Date: Jan 2009
Location: San Diego, CA
Posts: 3,674
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 839 Post(s)
Liked 1,062 Times
in
746 Posts
Also, if it's really stuck on there, put your quick release skewer through the tool and axle to hold it in place and have it tight enough to leave a little bit of play to allow the freewheel to turn a bit when it breaks free. This will allow you to put all your effort into the wrench and not worry the tool will pop out and fecker up the splines.
#7
Senior Member
Join Date: Oct 2008
Location: Northern NY...Brownville
Posts: 2,574
Bikes: Specialized Aethos, Specialized Diverge Comp E5
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 242 Post(s)
Liked 455 Times
in
266 Posts
Freewheel removal tool placed in bench vise...wheel with freewheel side down is placed onto removal tool...turn wheel counter/anti clock wise...
While you can use an adjustable wrench the bench vise method provides more leverage?
You may have to give the wheel a mighty turn to break the freewheel free of the hub...most likely you will.
Reverse the above method to reinstall/install the freewheel
While you can use an adjustable wrench the bench vise method provides more leverage?
You may have to give the wheel a mighty turn to break the freewheel free of the hub...most likely you will.
Reverse the above method to reinstall/install the freewheel
Likes For Kai Winters:
#8
Senior Member
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,794
Bikes: 1989 Cinelli Supercorsa
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3513 Post(s)
Liked 2,927 Times
in
1,776 Posts
That's always the method we used. Much less chance of buggering up the splines.
Likes For smd4:
#9
Senior Member
Join Date: May 2004
Location: Southern California
Posts: 2,191
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 119 Times
in
92 Posts
Regarding freewheels in general, they can be screwed on pretty tight, since the pedaling action tightens the mounting screw onto the hub. The bench vise method works best since you have a pretty good lever arm (the wheel) to break the joint free. (Some people liken it to a bus driver making a turn.) But if you don't have a bench vise, leave the inflated tire on the bike. Then place wheel vertical on the ground. Position your self over the wheel and use a long wrench (in the horizontal position) and use your weight to unscrew the freewheel. It's a great feeling when it breaks loose. And always a good idea to use the skewer or axle nut to loosely retain the tool into the splines. When re-installing grease the threads.
Likes For MudPie:
Likes For grumpus:
#11
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,376
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2484 Post(s)
Liked 2,956 Times
in
1,679 Posts
Regarding freewheels in general, they can be screwed on pretty tight, since the pedaling action tightens the mounting screw onto the hub. The bench vise method works best since you have a pretty good lever arm (the wheel) to break the joint free. (Some people liken it to a bus driver making a turn.) But if you don't have a bench vise, leave the inflated tire on the bike. Then place wheel vertical on the ground. Position your self over the wheel and use a long wrench (in the horizontal position) and use your weight to unscrew the freewheel. It's a great feeling when it breaks loose. And always a good idea to use the skewer or axle nut to loosely retain the tool into the splines. When re-installing grease the threads.
There's no downside to clamping the tool with the same (high) force you use to reinstall the wheel in the bike. Once the freewheel has moved even 2 or 3 degrees, the battle has been won. You can then begin loosening the skewer or axle a turn or so at a time while you continue to unscrew the freewheel.
There is a potential downside to not doing so, as holding some tools loosely and attempting to remove some hard-to-remove freewheels can result in damage to the freewheel and/or the tool. I once watched a mechanic in our shop ruin two remover tools in succession before I stepped in.
#12
Senior Member
Join Date: Apr 2011
Posts: 7,067
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 4409 Post(s)
Liked 1,565 Times
in
1,027 Posts
Agree, except for "use the skewer or axle nut to loosely retain the tool into the splines."
There's no downside to clamping the tool with the same (high) force you use to reinstall the wheel in the bike. Once the freewheel has moved even 2 or 3 degrees, the battle has been won. You can then begin loosening the skewer or axle a turn or so at a time while you continue to unscrew the freewheel.
There is a potential downside to not doing so, as holding some tools loosely and attempting to remove some hard-to-remove freewheels can result in damage to the freewheel and/or the tool. I once watched a mechanic in our shop ruin two remover tools in succession before I stepped in.
There's no downside to clamping the tool with the same (high) force you use to reinstall the wheel in the bike. Once the freewheel has moved even 2 or 3 degrees, the battle has been won. You can then begin loosening the skewer or axle a turn or so at a time while you continue to unscrew the freewheel.
There is a potential downside to not doing so, as holding some tools loosely and attempting to remove some hard-to-remove freewheels can result in damage to the freewheel and/or the tool. I once watched a mechanic in our shop ruin two remover tools in succession before I stepped in.
#13
Wheelman
Join Date: Aug 2021
Location: Putney, London UK
Posts: 845
Bikes: 1982 Holdsworth Avanti (531), 1961 Holdsworth Cyclone
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 298 Post(s)
Liked 676 Times
in
341 Posts
Another method for freewheels if you've still got the tire on and don't have a decent vice:
Lock removal tool with QR.
Get a long wrench.
Put the wheel against a brick wall on a hard (cement or tarmac for example) floor - so the tire grips on the floor and the bricks.
Apply the wrench about horizontal and push down.
Lock removal tool with QR.
Get a long wrench.
Put the wheel against a brick wall on a hard (cement or tarmac for example) floor - so the tire grips on the floor and the bricks.
Apply the wrench about horizontal and push down.
#14
Really Old Senior Member
Another method for freewheels if you've still got the tire on and don't have a decent vice:
Lock removal tool with QR.
Get a long wrench.
Put the wheel against a brick wall on a hard (cement or tarmac for example) floor - so the tire grips on the floor and the bricks.
Apply the wrench about horizontal and push down.
Lock removal tool with QR.
Get a long wrench.
Put the wheel against a brick wall on a hard (cement or tarmac for example) floor - so the tire grips on the floor and the bricks.
Apply the wrench about horizontal and push down.
IF you have a helper, have the strong one hold the wheel and the weak one step on the horizontally positioned wrench.
Last edited by Bill Kapaun; 03-20-24 at 02:48 PM.
#15
Senior Member
Join Date: Mar 2019
Posts: 1,606
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 581 Post(s)
Liked 921 Times
in
518 Posts
Is that the correct tool, though? That looks like the tool for removing cassette lock rings, not freewheels. THe spline patters on the two are generally slightly different and so they are not perfectly cross-compatible. Also, freewheel spline tools are generally longer so there is more contact between the tool splines and the freewheel splines.
#16
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,376
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2484 Post(s)
Liked 2,956 Times
in
1,679 Posts
Thanks for the clarification! You're right, of course. I was thinking of the two-pronged tools used for Suntour and the like.
#17
Wheelman
Join Date: Aug 2021
Location: Putney, London UK
Posts: 845
Bikes: 1982 Holdsworth Avanti (531), 1961 Holdsworth Cyclone
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 298 Post(s)
Liked 676 Times
in
341 Posts
If the wrench is horizontal the downward pressure pushes the tyre into the floor and the wall and there's plenty of grip.
#18
Really Old Senior Member
I just use the outside door jamb of my garage if necessary & box end of my 1" combination wrench. It's never failed me.
#19
Senior Member
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,794
Bikes: 1989 Cinelli Supercorsa
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3513 Post(s)
Liked 2,927 Times
in
1,776 Posts
Is that the correct tool, though? That looks like the tool for removing cassette lock rings, not freewheels. THe spline patters on the two are generally slightly different and so they are not perfectly cross-compatible. Also, freewheel spline tools are generally longer so there is more contact between the tool splines and the freewheel splines.
Last edited by smd4; 03-20-24 at 04:20 PM.