Does this look right?
#1
Senior Member
Thread Starter
Does this look right?
Trying to set up a roller cam on the rear but the springs look like they should be straight, not curving inward:
Theoretically, this could cause mud buildup around the tire, affecting braking in sloppy conditions (Not that I ride muddy trails any more). Just looks like the springs should more closely follow the profile of the arms, but if I flip the springs over in the perches then the spring return action works to push the pads into the rims... power assist brakes!
Also, should there be some sort of washer to help retain the springs in the spring perch? This view is as if you were looking at the brake from the frame side of the bike:
Any thoughts/advice?
Theoretically, this could cause mud buildup around the tire, affecting braking in sloppy conditions (Not that I ride muddy trails any more). Just looks like the springs should more closely follow the profile of the arms, but if I flip the springs over in the perches then the spring return action works to push the pads into the rims... power assist brakes!
Also, should there be some sort of washer to help retain the springs in the spring perch? This view is as if you were looking at the brake from the frame side of the bike:
Any thoughts/advice?
Likes For Smokinapankake:
#2
Senior Member
Join Date: Feb 2017
Location: Concord, NC
Posts: 701
Bikes: 1984 Bianchi Tipo Corsa, 1985 Cannondale SM600 (24/26)
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 235 Post(s)
Liked 349 Times
in
190 Posts
Those look a little more curved than mine. But mine are curved. Mine do not have washers. Hard to see in this picture and perspective makes it look like no clearance but I have plenty. Maybe they are different models? Mine are Have aluminum Rollers.
Last edited by Bianchi84; 07-26-20 at 07:05 PM. Reason: Add Pic
#3
Senior Member
Thread Starter
Thank you so much Bianchi, that’s very helpful! This brake came off an old Diamond Back Apex, probably 86 ish, but it sat in a box for decades. I was afraid I’d lost some pieces. Looks like your brake uses standard post mount brake pads; my pads use a threaded shaft. Originally mine had alloy pulleys, but I used them for something somewhere along the line. Fortunately I have access to an accommodating machinist; hence the brass pulleys it now sports. I think I would like to replace the pad mounting apparatus with a non threaded post style... finding brake pads would be so much easier!
#4
Senior Member
Join Date: Feb 2017
Location: Concord, NC
Posts: 701
Bikes: 1984 Bianchi Tipo Corsa, 1985 Cannondale SM600 (24/26)
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 235 Post(s)
Liked 349 Times
in
190 Posts
The Kool Stops' smooth posts fit mine with no problem, no modification. I had the threaded posts originally as well. Give it a shot with test pad before investing in the pads you really want just to be sure yours will accept them like mine did. I love these brakes!
#5
Senior Member
Thread Starter
Funny that never occurred to me to try! I’ll give it a go. I like Origin8 MTB black and red, I forget what they’re called...
#6
Senior Member
Thread Starter
Also, could you measure the mounting post spacing center to center? I’m curious if mine are wide or narrow. I’m thinking wide...
#8
Senior Member
Thread Starter
Yes. Mine measure at 3.5” or 89mm so I guess they’re correct. Thanks so much for your help!
Likes For Smokinapankake:
#9
Full Member
Join Date: Sep 2008
Location: Santa Cruz, CA
Posts: 309
Bikes: Miyata six-ten, Miyata Grand Touring, Univega Sport Tour, Univega Gran Turismo, 80's Trek MTB, 2008 Dahon Mariner
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked 83 Times
in
58 Posts
Wow, never seen these before. Pretty cool!
__________________
Give thanks, for unknown blessings are already on their way.
~Native American Prayer
Give thanks, for unknown blessings are already on their way.
~Native American Prayer
#10
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,646
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,699 Times
in
935 Posts
These are the 1987 XC Sport versions of the roller cams- they have the infinitely adjustable spring tension setup.
1987 Schwinn High Sierra by Dave The Golden Boy, on Flickr
1987 Schwinn High Sierra by Dave The Golden Boy, on Flickr
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Likes For The Golden Boy:
#11
Senior Member
Thread Starter
And two different roller positions, but Bianchi’s and mine are also infinitely adjustable springs...