What tools are these?
#1
Car free since 2018
Thread Starter
Join Date: Aug 2017
Location: Vancouver, BC
Posts: 685
Bikes: Mostly japanese ones
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 259 Post(s)
Liked 269 Times
in
134 Posts
What tools are these?
Hi
I bought a random box of tools and there are a few I'm not sure what they are. The one on the left I'm not even sure is a bike tool. I'm guessing the one that looks like a T is a tool for the chainring bolts. The one next to it I'm guessing is a key to wind up a toy?
Also, there were some chains included stamped with PC 951 on the links and K8 on some of the links. Would this be usable for my 5-7 speed rear cogs?
Thanks
I bought a random box of tools and there are a few I'm not sure what they are. The one on the left I'm not even sure is a bike tool. I'm guessing the one that looks like a T is a tool for the chainring bolts. The one next to it I'm guessing is a key to wind up a toy?
Also, there were some chains included stamped with PC 951 on the links and K8 on some of the links. Would this be usable for my 5-7 speed rear cogs?
Thanks
#2
Senior Member
The one on the left is a crank puller--actually a car tool, I believe, but useful for pulling off a crank that has stripped threads so you can't get the normal tool to work. And I'm pretty sure the one on the right is for tightening the cap on a modern BB/crank system like the Shimano Hollowtech stuff.
Likes For Headpost:
#3
Senior Member
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,451 Times
in
723 Posts
That T-handled thing with the three prongs on the end is likely a chainring bolt driver.
__________________
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
#4
Full Member
Join Date: Sep 2015
Location: Denver Colorado
Posts: 339
Bikes: 2020 Pivot Vault, 1983 Rossin Record, Garneau R1, Mesamods home built gravel/rain commuter bike, 1995 Barracuda A2V modified with Surley single speed dropouts, 1969 Bottecchia junkyard special fixed gear, Cervelo P4, Mesamods 650b klunker
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 96 Post(s)
Liked 72 Times
in
50 Posts
The piece with the green tape is for a Shimano hollowtech II crank preload cap and the Park tool tool is a dummy pedal to turn the crank when no pedals are installed.
#5
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,984
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26419 Post(s)
Liked 10,380 Times
in
7,208 Posts
...back when they were not solid state ignitions, I used to use a three armed puller about that size and configuration to pull the flywheel off my lawnmower engines to access the stuff you needed to service. I guess you could use it to pull other stuff, like on a bike, but I never have because there are other things that work better for me.
#6
Senior Member
Join Date: Aug 2010
Location: Central Florida, USA
Posts: 1,991
Bikes: Litespeed (9); Slingshot (9); Specialized (3); Kestrel (2); Cervelo (1); FELT (1); Trek (2)
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 436 Post(s)
Liked 3,471 Times
in
999 Posts
The Park Tool is a hamster restraint device. The veterinarian slips the wire end over the head and behind the ears of an aggressive hamster with sharp chisel-like teeth, and turns the rear disc to tighten the wire gently but firmly around the hamsters neck area. The rigid nature of the tool keeps the business end of the hamster a safe distance away from the good doctor's healing hands and helps control the hamster during a physical examination.
__________________
WTB: Slingshot bicycle promotional documents (catalog, pamphlets, etc).
WTB: American Cycling May - Aug, Oct, Dec 1966.
WTB: Bicycle Guide issues 1984 (any); Jun 1987; Jul, Nov/Dec 1992; Apr 1994; 1996 -1998 (any)
WTB: Bike World issue Jun 1974.
WTB: Slingshot bicycle promotional documents (catalog, pamphlets, etc).
WTB: American Cycling May - Aug, Oct, Dec 1966.
WTB: Bicycle Guide issues 1984 (any); Jun 1987; Jul, Nov/Dec 1992; Apr 1994; 1996 -1998 (any)
WTB: Bike World issue Jun 1974.
Likes For SpeedofLite:
#7
Mr. Anachronism
Join Date: Jan 2013
Location: Somewhere west of Tobie's
Posts: 2,087
Bikes: fillet-brazed Chicago Schwinns, and some other stuff
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 526 Post(s)
Liked 256 Times
in
165 Posts
Yes, the tool on the left is a universal puller. I use mine to pull the harmonic balancer off a Chevy V8, but I've also used it to pull a (bicycle) crank that has the extractor threads stripped out.
__________________
"My only true wisdom is in knowing I have none" -Socrates
"My only true wisdom is in knowing I have none" -Socrates
#8
Car free since 2018
Thread Starter
Join Date: Aug 2017
Location: Vancouver, BC
Posts: 685
Bikes: Mostly japanese ones
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 259 Post(s)
Liked 269 Times
in
134 Posts
The Park Tool is a hamster restraint device. The veterinarian slips the wire end over the head and behind the ears of an aggressive hamster with sharp chisel-like teeth, and turns the rear disc to tighten the wire gently but firmly around the hamsters neck area. The rigid nature of the tool keeps the business end of the hamster a safe distance away from the good doctor's healing hands and helps control the hamster during a physical examination.
Thanks for all the replies guys. There were other tools in the bins but I could make most of them out. What exactly I'm going to do with 6 pedal wrenches, 12 pin spanners, 18 headset wrenches, multiple cone wrenches, 6 bottom bracket lock ring tools, a dozen chains that apparently are 8 or 9 speed so I can't use, and some other bits and pieces I'm not exactly sure just yet.
There was a nice big park tool stand but I didn't think I could fit it in my small car or in my wallet. Unfortunately I didn't see any truing stands or derailleur alignment tools, which I would have wanted. Or maybe I should have looked in that third bin she had for sale. I didn't want to overplay my hand by digging through it and looking too interested. Well, I got what I could get.
Bye.
#9
Senior Member
Join Date: Nov 2015
Posts: 4,486
Mentioned: 102 Post(s)
Tagged: 0 Thread(s)
Quoted: 1639 Post(s)
Likes: 0
Liked 829 Times
in
538 Posts
Usually called a "gear puller" in the auto world....
__________________
72 Line Seeker
83 Davidson Signature
84 Peugeot PSV
84 Peugeot PY10FC
84 Gitane Tour de France.
85 Vitus Plus Carbone 7
86 ALAN Record Carbonio
86 Medici Aerodynamic (Project)
88 Pinarello Montello
89 Bottecchia Professional Chorus SL
95 Trek 5500 OCLV (Project)
72 Line Seeker
83 Davidson Signature
84 Peugeot PSV
84 Peugeot PY10FC
84 Gitane Tour de France.
85 Vitus Plus Carbone 7
86 ALAN Record Carbonio
86 Medici Aerodynamic (Project)
88 Pinarello Montello
89 Bottecchia Professional Chorus SL
95 Trek 5500 OCLV (Project)
Likes For Chombi1:
#10
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,846
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2338 Post(s)
Liked 2,822 Times
in
1,541 Posts
Ah a multi purpose tool. Fantastic. I have a cousin who's a vet I might be able to sell it to her.
Thanks for all the replies guys. There were other tools in the bins but I could make most of them out. What exactly I'm going to do with 6 pedal wrenches, 12 pin spanners, 18 headset wrenches, multiple cone wrenches, 6 bottom bracket lock ring tools, a dozen chains that apparently are 8 or 9 speed so I can't use, and some other bits and pieces I'm not exactly sure just yet.
There was a nice big park tool stand but I didn't think I could fit it in my small car or in my wallet. Unfortunately I didn't see any truing stands or derailleur alignment tools, which I would have wanted. Or maybe I should have looked in that third bin she had for sale. I didn't want to overplay my hand by digging through it and looking too interested. Well, I got what I could get.
Bye.
Thanks for all the replies guys. There were other tools in the bins but I could make most of them out. What exactly I'm going to do with 6 pedal wrenches, 12 pin spanners, 18 headset wrenches, multiple cone wrenches, 6 bottom bracket lock ring tools, a dozen chains that apparently are 8 or 9 speed so I can't use, and some other bits and pieces I'm not exactly sure just yet.
There was a nice big park tool stand but I didn't think I could fit it in my small car or in my wallet. Unfortunately I didn't see any truing stands or derailleur alignment tools, which I would have wanted. Or maybe I should have looked in that third bin she had for sale. I didn't want to overplay my hand by digging through it and looking too interested. Well, I got what I could get.
Bye.
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Likes For big chainring:
#12
Senior Member
Join Date: Dec 2005
Posts: 17,158
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3810 Post(s)
Liked 6,699 Times
in
2,611 Posts
The Park Tool is a hamster restraint device. The veterinarian slips the wire end over the head and behind the ears of an aggressive hamster with sharp chisel-like teeth, and turns the rear disc to tighten the wire gently but firmly around the hamsters neck area. The rigid nature of the tool keeps the business end of the hamster a safe distance away from the good doctor's healing hands and helps control the hamster during a physical examination.
Likes For grizzly59:
#14
Senior Member
Join Date: Aug 2010
Location: Central Florida, USA
Posts: 1,991
Bikes: Litespeed (9); Slingshot (9); Specialized (3); Kestrel (2); Cervelo (1); FELT (1); Trek (2)
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 436 Post(s)
Liked 3,471 Times
in
999 Posts
For the Park Tool, the answer is Yes. However, gerbils run a bit smaller than hamsters and the smallest of them can sometimes slip out of the loop.
In those cases it helps to place small diameter polyethylene tube around the loop. A used IV line works well. The smaller gerbils seem to tolerate the loop better and are more calm with this modification.
It's been said the purpose of the threaded end is to serve as the point of attachment for a 12" extension rod to allow its use in human hospital emergency rooms as a gerbil extraction tool.
But I really can't confirm that and, quite frankly, don't believe a single word of it.
I've never checked into VAR, but I bet you're right.
I'm sure CYCLUS would make a very nice one too, but I never looked into them either.
Man, I wish I had saved my responses for April 1.
In those cases it helps to place small diameter polyethylene tube around the loop. A used IV line works well. The smaller gerbils seem to tolerate the loop better and are more calm with this modification.
It's been said the purpose of the threaded end is to serve as the point of attachment for a 12" extension rod to allow its use in human hospital emergency rooms as a gerbil extraction tool.
But I really can't confirm that and, quite frankly, don't believe a single word of it.
I've never checked into VAR, but I bet you're right.
I'm sure CYCLUS would make a very nice one too, but I never looked into them either.
Man, I wish I had saved my responses for April 1.
__________________
WTB: Slingshot bicycle promotional documents (catalog, pamphlets, etc).
WTB: American Cycling May - Aug, Oct, Dec 1966.
WTB: Bicycle Guide issues 1984 (any); Jun 1987; Jul, Nov/Dec 1992; Apr 1994; 1996 -1998 (any)
WTB: Bike World issue Jun 1974.
WTB: Slingshot bicycle promotional documents (catalog, pamphlets, etc).
WTB: American Cycling May - Aug, Oct, Dec 1966.
WTB: Bicycle Guide issues 1984 (any); Jun 1987; Jul, Nov/Dec 1992; Apr 1994; 1996 -1998 (any)
WTB: Bike World issue Jun 1974.
Likes For SpeedofLite:
#15
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1608 Post(s)
Liked 2,216 Times
in
1,103 Posts
The one on the left is a crank puller--actually a car tool, I believe, but useful for pulling off a crank that has stripped threads so you can't get the normal tool to work. And I'm pretty sure the one on the right is for tightening the cap on a modern BB/crank system like the Shimano Hollowtech stuff.
P1000181, on Flickr
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
#16
verktyg
Join Date: Jul 2006
Location: SF Bay Area
Posts: 4,030
Bikes: Current favorites: 1988 Peugeot Birraritz, 1984 Gitane Super Corsa, 1980s DeRosa, 1981 Bianchi Campione Del Mondo, 1992 Paramount OS, 1988 Colnago Technos, 1985 RalieghUSA SBDU Team Pro
Mentioned: 207 Post(s)
Tagged: 0 Thread(s)
Quoted: 1036 Post(s)
Liked 1,238 Times
in
654 Posts
Best Laugh Of The Day
It's been said the purpose of the threaded end is to serve as the point of attachment for a 12" extension rod to allow its use in human hospital emergency rooms as a gerbil extraction tool. But I really can't confirm that and, quite frankly, don't believe a single word of it.
verktyg
__________________
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)