I have replaced my, perfectly ok but not as pretty as my new one, fork jig. It’s a Bringheli I bought used about 8 years ago. I have just finished the 10th fork I’ve put through it. It works well, is as straight as I can fabricate with only tiny tweaks after brazing needed (I have aligned the steerer block and the axle riser on my surface plate). I have added a repair stand jaw mount (piece of tubing) and more scales. Now 1 1/8” steerer’s rake and the A-C dimension (along the steering axis) (the square showing the crown seat placement isn’t included). $300 plus actual shipping (know that this is a nearly 20lb package, expect $10 to $30 to deliver depending on where in the 48 US states)I take PayPal or might be convinced of accepting a check. I have more photos for the asking. I will be traveling to SE PA in a few weeks and could meet up along the way if needed. Andy