Jeunet, Gitane & Bottechia framesets, T.A. crankset, etc.
#1
Senior Member
Thread Starter
Join Date: May 2013
Location: Greenwood SC USA
Posts: 2,252
Bikes: 2002 Mercian Vincitore, 1982 Mercian Colorado, 1976 Puch Royal X, 1973 Raleigh Competition, 1971 Gitane Tour de France and others
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 823 Post(s)
Liked 1,395 Times
in
694 Posts
Jeunet, Gitane & Bottechia framesets, T.A. crankset, etc.
The clean-out continues! Pix are here, and combo deals are easily made. Thanks!
Parts -
T.A. Pro Vis 170 mm crankset with 52/45T chainrings and blind French-thread pedal holes, missing one chainring bolt, sold as a package with a French-thread T.A. bottom bracket with a no. 344 spindle meant for double chainrings, $75 shipped in the U.S.
Shimano RX100 47-57 mm dual pivot calipers with standard Shimano pads (disregard pads on left caliper in photo at link), $25.00 shipped
Shimano 600EX rear derailleur with replacement clamp bolt and barrel adjuster, $20 shipped
Shimano 105 RD1056 rear derailleur, some scuffs and scratches, $20 shipped
Framesets -
Jeunet 630 58.5 seat tube x 56.5 cm c-c top tube, with the original fork & Stronglight P3 headset, Reynolds 531 frame, forks and stays, French threads, takes a 26.4 mm seat post, currently in tatty primer gray. Bocama model 14/type I lugs, Wagner PL fork crown, chrome socks in the rear, fully chromed fork (originally painted halfway), Simplex ends without hanger for use with claw mount derailleurs. I had pondered a 650B conversion; the clearance is a bit too tight up front for a fat 700C tire. Also a good candidate for fixed-gear/single-speed use. $70 plus shipping costs, probably via BikeFlights. Buy the T.A. crankset and BB above (which I got separately but which are the correct ones for this bike when new) and I'll do the lot for $125 plus shipping. SOLD
Bottechia De Luxe 58 x 58 cm c-c with headset and bottom bracket AND stock alloy Carnielli stem and handlebars, plus beat Shimano aero levers shoehorned into yellow Dia Compe aero hoods, $50 plus shipping. UPDATE - this takes around a 26-point-something seatpost, like perhaps a 26.4? I am assuming it is plain gauge tubing of some sort.
Gitane Grand Sport 54x54 cm c-c with headset - it's gaspipe, but it's FRENCH gaspipe and it's got patina in spades, howabout $20 + shipping?
As always, if you think my prices are out of line, lemme know. Thanks!
Parts -
T.A. Pro Vis 170 mm crankset with 52/45T chainrings and blind French-thread pedal holes, missing one chainring bolt, sold as a package with a French-thread T.A. bottom bracket with a no. 344 spindle meant for double chainrings, $75 shipped in the U.S.
Shimano RX100 47-57 mm dual pivot calipers with standard Shimano pads (disregard pads on left caliper in photo at link), $25.00 shipped
Shimano 600EX rear derailleur with replacement clamp bolt and barrel adjuster, $20 shipped
Shimano 105 RD1056 rear derailleur, some scuffs and scratches, $20 shipped
Framesets -
Jeunet 630 58.5 seat tube x 56.5 cm c-c top tube, with the original fork & Stronglight P3 headset, Reynolds 531 frame, forks and stays, French threads, takes a 26.4 mm seat post, currently in tatty primer gray. Bocama model 14/type I lugs, Wagner PL fork crown, chrome socks in the rear, fully chromed fork (originally painted halfway), Simplex ends without hanger for use with claw mount derailleurs. I had pondered a 650B conversion; the clearance is a bit too tight up front for a fat 700C tire. Also a good candidate for fixed-gear/single-speed use.
Bottechia De Luxe 58 x 58 cm c-c with headset and bottom bracket AND stock alloy Carnielli stem and handlebars, plus beat Shimano aero levers shoehorned into yellow Dia Compe aero hoods, $50 plus shipping. UPDATE - this takes around a 26-point-something seatpost, like perhaps a 26.4? I am assuming it is plain gauge tubing of some sort.
Gitane Grand Sport 54x54 cm c-c with headset - it's gaspipe, but it's FRENCH gaspipe and it's got patina in spades, howabout $20 + shipping?
As always, if you think my prices are out of line, lemme know. Thanks!
Last edited by rustystrings61; 07-24-19 at 11:56 AM.
#2
Senior Member
Join Date: May 2016
Location: Toronto, Ontario
Posts: 67
Bikes: 1993 Pinarello Vuelta Retroroadie / 1974 Raleigh Sprite
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 13 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Interested in bottechia deluxe. Can you post pics
The clean-out continues! Pix are here, and combo deals are easily made. Thanks!
Parts -
T.A. Pro Vis 170 mm crankset with 52/45T chainrings and blind French-thread pedal holes, missing one chainring bolt, sold as a package with a French-thread T.A. bottom bracket with a no. 344 spindle meant for double chainrings, $75 shipped in the U.S.
Shimano RX100 47-57 mm dual pivot calipers with standard Shimano pads (disregard pads on left caliper in photo at link), $25.00 shipped
Shimano 600EX rear derailleur with replacement clamp bolt and barrel adjuster, $20 shipped
Shimano 105 RD1056 rear derailleur, some scuffs and scratches, $20 shipped
Framesets -
Jeunet 630 58.5 seat tube x 56.5 cm c-c top tube, with the original fork & Stronglight P3 headset, Reynolds 531 frame, forks and stays, French threads, takes a 26.4 mm seat post, currently in tatty primer gray. Bocama model 14/type I lugs, Wagner PL fork crown, chrome socks in the rear, fully chromed fork (originally painted halfway), Simplex ends without hanger for use with claw mount derailleurs. I had pondered a 650B conversion; the clearance is a bit too tight up front for a fat 700C tire. Also a good candidate for fixed-gear/single-speed use. $70 plus shipping costs, probably via BikeFlights. Buy the T.A. crankset and BB above (which I got separately but which are the correct ones for this bike when new) and I'll do the lot for $125 plus shipping.
Bottechia De Luxe 58 x 58 cm c-c with headset and bottom bracket AND stock alloy Carnielli stem and handlebars, plus beat Shimano aero levers shoehorned into yellow Dia Compe aero hoods, $50 plus shipping.
Gitane Grand Sport 54x54 cm c-c with headset - it's gaspipe, but it's FRENCH gaspipe and it's got patina in spades, howabout $20 + shipping?
As always, if you think my prices are out of line, lemme know. Thanks!
Parts -
T.A. Pro Vis 170 mm crankset with 52/45T chainrings and blind French-thread pedal holes, missing one chainring bolt, sold as a package with a French-thread T.A. bottom bracket with a no. 344 spindle meant for double chainrings, $75 shipped in the U.S.
Shimano RX100 47-57 mm dual pivot calipers with standard Shimano pads (disregard pads on left caliper in photo at link), $25.00 shipped
Shimano 600EX rear derailleur with replacement clamp bolt and barrel adjuster, $20 shipped
Shimano 105 RD1056 rear derailleur, some scuffs and scratches, $20 shipped
Framesets -
Jeunet 630 58.5 seat tube x 56.5 cm c-c top tube, with the original fork & Stronglight P3 headset, Reynolds 531 frame, forks and stays, French threads, takes a 26.4 mm seat post, currently in tatty primer gray. Bocama model 14/type I lugs, Wagner PL fork crown, chrome socks in the rear, fully chromed fork (originally painted halfway), Simplex ends without hanger for use with claw mount derailleurs. I had pondered a 650B conversion; the clearance is a bit too tight up front for a fat 700C tire. Also a good candidate for fixed-gear/single-speed use. $70 plus shipping costs, probably via BikeFlights. Buy the T.A. crankset and BB above (which I got separately but which are the correct ones for this bike when new) and I'll do the lot for $125 plus shipping.
Bottechia De Luxe 58 x 58 cm c-c with headset and bottom bracket AND stock alloy Carnielli stem and handlebars, plus beat Shimano aero levers shoehorned into yellow Dia Compe aero hoods, $50 plus shipping.
Gitane Grand Sport 54x54 cm c-c with headset - it's gaspipe, but it's FRENCH gaspipe and it's got patina in spades, howabout $20 + shipping?
As always, if you think my prices are out of line, lemme know. Thanks!
#3
Senior Member
Thread Starter
Join Date: May 2013
Location: Greenwood SC USA
Posts: 2,252
Bikes: 2002 Mercian Vincitore, 1982 Mercian Colorado, 1976 Puch Royal X, 1973 Raleigh Competition, 1971 Gitane Tour de France and others
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 823 Post(s)
Liked 1,395 Times
in
694 Posts
The Bottechia - not shown, but for disclosure, it has a previous owner's Georgia driver's license number scratched into the paint of the seat tube. A sticker would fix that ...
#4
Senior Member
Join Date: Dec 2005
Posts: 17,158
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3810 Post(s)
Liked 6,702 Times
in
2,612 Posts
PM sent (I think; system keeps booting me out. If you didn't get it, you can email me at lerner dot n at gmail dot com).
Thread
Thread Starter
Forum
Replies
Last Post
rustystrings61
Classic and Vintage Sales
2
07-29-19 08:08 AM
Steve Whitlatch
Classic and Vintage Sales
9
04-27-17 09:36 AM
BlueDevil63
Classic and Vintage Sales
5
02-20-17 08:08 AM
PatTheSlat
Classic and Vintage Sales
16
11-26-15 01:38 AM