Glenn Erickson custom road bike
#1
Full Member
Thread Starter
SOLD Glenn Erickson custom road bike
Big custom Erickson for sale.
Condition is as-pictured, and as-found. I have had it for a few years but I have never ridden it, tuned it, messed with it or even aired up the tires. It is in generally good condition aside from some scrapes and chips on the underside of the top tube and front side of the seat tube, probably from storage or rack.
Components are Record Titanium 8 speed with the Delta brakes. King HS.
C-C measurements are around 62.5x58.5
Click here for the photos.
$1200. SOLD Shipping & fees additional. USA only.
Condition is as-pictured, and as-found. I have had it for a few years but I have never ridden it, tuned it, messed with it or even aired up the tires. It is in generally good condition aside from some scrapes and chips on the underside of the top tube and front side of the seat tube, probably from storage or rack.
Components are Record Titanium 8 speed with the Delta brakes. King HS.
C-C measurements are around 62.5x58.5
Click here for the photos.
$1200. SOLD Shipping & fees additional. USA only.
Last edited by Gartenmeister; 10-15-19 at 08:26 PM. Reason: SOLD
#2
Senior Member
Join Date: Jun 2017
Location: Colorado
Posts: 208
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 107 Post(s)
Likes: 0
Liked 21 Times
in
13 Posts
That's a pretty bike. Do you know anything about it's history, year, and frame geometry? I looked at the R+E webpage, and they still sell custom Erickson bikes. Anyone know if Glenn is still associated with R+E, and is he designing their custom Erickson bikes?
#3
Full Member
Thread Starter
I know nothing of the history other than I suspect it belonged to a Seattle area resident who relocated to Sun Valley (very common) and sold the bike through a local store. That is where I acquired it. All I know of the geometry is the obvious. Happy to take measurements. Year can be approximated by the components.
Glenn Erickson has Parkinson's disease and to the best of my knowledge has not been building frames for at least a decade.
Glenn Erickson has Parkinson's disease and to the best of my knowledge has not been building frames for at least a decade.
#4
Senior Member
Join Date: Aug 2010
Location: Utah
Posts: 8,825
Bikes: Paletti,Pinarello Monviso,Duell Vienna,Giordana XL Super,Lemond Maillot Juane.& custom,PDG Paramount,Fuji Opus III,Davidson Impulse,Pashley Guv'nor,Evans,Fishlips,Y-Foil,Softride, Tetra Pro, CAAD8 Optimo,
Mentioned: 154 Post(s)
Tagged: 0 Thread(s)
Quoted: 2300 Post(s)
Liked 4,766 Times
in
1,725 Posts
That bike is gorgeous. If it was my size I'd be calling in sick tomorrow and driving up to see you, seriously! GLWS.
__________________
Steel is real...and comfy.
Steel is real...and comfy.
#9
Full Member
Thread Starter
It is a Google Album, so make sure nothing in your browser limits Google access. It works fine on my PC even when not logged in (to Google).
Here's a fresh link to try.
Here's a fresh link to try.
#10
Senior Member
Join Date: Jan 2013
Posts: 2,652
Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 560 Post(s)
Liked 546 Times
in
396 Posts
My son-in-law is 6'-5", rides a 62 and IIRC is at the 99.5% height percentile for American men so it may take you some time to get something close to what you want.
Thread
Thread Starter
Forum
Replies
Last Post
GailT
General Cycling Discussion
20
12-21-21 07:28 PM
dwmckee
Framebuilders
5
04-19-13 10:10 PM
tjspiel
Commuting
23
08-09-10 11:22 AM