Got a (JP) Routens
#1
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Madison, WI
Posts: 2,701
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 1136 Post(s)
Liked 650 Times
in
336 Posts
Got a (JP) Routens
I received this fillet-brazed Jean Paul Routens a couple days ago and spent some time tonight disassembling and cleaning the frame.
It definitely looks like an early or mid 1980s model, so built by JPR and not his father Jo. The tubing transfer says 531ST, which was introduced in around 1980, and the brakes that came with the bike are the uncommon MAFAC GT with the quick release lever, which were also introduced around that time period. Father and son Routens used a variety of styles of decal over the years - this blocky gold one I have seen on bikes from the 70s and 80s.
This one is built for light touring, with 3 sets of rear mounts and mid-fork eyelets. Some nice features are the brazed-on centerpull mounts, the threaded mounting hole under the fork crown for a fender, and internal routing for the rear brake cable and for dynamo light wiring. Unfortunately the original custom racks and decaleur are gone. I will clean up some of the other components and post more pictures as I rebuild it, and I'll also build new racks for it. I've been talking to @gugie's favorite bagmaker Waxwing about making some bags for it down the line.
It definitely looks like an early or mid 1980s model, so built by JPR and not his father Jo. The tubing transfer says 531ST, which was introduced in around 1980, and the brakes that came with the bike are the uncommon MAFAC GT with the quick release lever, which were also introduced around that time period. Father and son Routens used a variety of styles of decal over the years - this blocky gold one I have seen on bikes from the 70s and 80s.
This one is built for light touring, with 3 sets of rear mounts and mid-fork eyelets. Some nice features are the brazed-on centerpull mounts, the threaded mounting hole under the fork crown for a fender, and internal routing for the rear brake cable and for dynamo light wiring. Unfortunately the original custom racks and decaleur are gone. I will clean up some of the other components and post more pictures as I rebuild it, and I'll also build new racks for it. I've been talking to @gugie's favorite bagmaker Waxwing about making some bags for it down the line.
Likes For TenGrainBread:
#2
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Madison, WI
Posts: 2,701
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 1136 Post(s)
Liked 650 Times
in
336 Posts
As far as what the original racks would have looked like - I found this picture of a very similar bike JPR made from the same time period. I love the rear rack - it keeps the bags low to the ground and away from the heels, and also serves as the fender mounting point. Notice the taillight mounted to it as well.
#3
Senior Member
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,451 Times
in
723 Posts
That is a very nice thing!! I'm excited to see the rack build.
How does the dynamo wire go? Exits at the BB for an under-BB style generator?
How does the dynamo wire go? Exits at the BB for an under-BB style generator?
Likes For TenGrainBread:
#5
Senior Member
Join Date: Aug 2009
Location: Berkeley, CA
Posts: 7,244
Bikes: '72 Cilo Pacer, '72 Gitane Gran Tourisme, '72 Peugeot PX10, '73 Speedwell Ti, '74 Peugeot UE-8, '75 Peugeot PR-10L, '80 Colnago Super, '85 De Rosa Pro, '86 Look Equipe 753, '86 Look KG86, '89 Parkpre Team, '90 Parkpre Team MTB, '90 Merlin
Mentioned: 87 Post(s)
Tagged: 0 Thread(s)
Quoted: 834 Post(s)
Liked 2,126 Times
in
555 Posts
That's fantastic! I'm smitten. Looking forward to seeing what you do with it. Do you have the matching rear MAFAC GT caliper? Will this require a seat binder mounted hanger for the rear brake?
#6
Banned.
Join Date: Jul 2009
Location: PAZ
Posts: 12,294
Mentioned: 255 Post(s)
Tagged: 0 Thread(s)
Quoted: 2588 Post(s)
Liked 4,824 Times
in
1,709 Posts
This is the kind of French stuff that lights my fire
Awesome pick up - and you're right, the lowrider rear racks look cool and complement the front well. I wonder if a certain somebody on this forum could duplicate them for you - or do you mean you'll build them yourself?
This will be a build to watch.
DD
Awesome pick up - and you're right, the lowrider rear racks look cool and complement the front well. I wonder if a certain somebody on this forum could duplicate them for you - or do you mean you'll build them yourself?
This will be a build to watch.
DD
Likes For Drillium Dude:
#7
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Madison, WI
Posts: 2,701
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 1136 Post(s)
Liked 650 Times
in
336 Posts
@gaucho777 Yes it came with the rear GT caliper. It was fully built as received but I'll be changing the cockpit.
@Drillium Dude I'll be building the racks myself from stainless tubing. I'm a welder by trade.
@Drillium Dude I'll be building the racks myself from stainless tubing. I'm a welder by trade.
Likes For TenGrainBread:
#8
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,398
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,698 Times
in
2,518 Posts
I'm curious what went to the upper bosses on the seat stays and the lower bosses on the forks.
#13
Full Member
I'm curious if you have any ideas for the BB dynamo control lever boss. My Koga Miyata Randonneur has one too, and I'm definitely not using the old BB dynamo.
I've considered modifying a shifter to use for switching hub dynamo powered lights on and off.
I've considered modifying a shifter to use for switching hub dynamo powered lights on and off.
#14
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Madison, WI
Posts: 2,701
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 1136 Post(s)
Liked 650 Times
in
336 Posts
One idea that I had if you're not using a BB dynamo is getting a top pull mountain bike derailleur from the early 90s (Deore XT or XTR) and shifting it using that lever boss. Could be a cool experiment!
#15
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,639
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4682 Post(s)
Liked 5,800 Times
in
2,284 Posts
subscribing!
Dave’s fantastic to work with. You’ll love his bags.
Dave’s fantastic to work with. You’ll love his bags.
#16
Senior Member
#17
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,647
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,703 Times
in
937 Posts
Whoa.
Sweet.
Sweet.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#18
Senior Member
Can't wait to see this. Nice that you have a model for the racks. That is an incredible example of a French camping bike from a period not often seen.
BB generators were the thing then. Theoretically, it's still the best. No drag when you don't need it, and they work with light tires, even sew ups.
BB generators were the thing then. Theoretically, it's still the best. No drag when you don't need it, and they work with light tires, even sew ups.
#19
aged to perfection
Join Date: Jun 2009
Location: PacNW
Posts: 1,816
Bikes: Dinucci Allez 2.0, Richard Sachs, Alex Singer, Serotta, Masi GC, Raleigh Pro Mk.1, Hetchins, etc
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 837 Post(s)
Liked 1,258 Times
in
663 Posts
that's a very special bike !
Corey Thompson can probably build you racks from the picture. He'd probably want the bike for a week or so for final fitting.
Mark Petry
Bainbridge Island, WA USA
Corey Thompson can probably build you racks from the picture. He'd probably want the bike for a week or so for final fitting.
Mark Petry
Bainbridge Island, WA USA
#20
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,513
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2422 Post(s)
Liked 4,395 Times
in
2,092 Posts
Likes For TenGrainBread:
#24
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Madison, WI
Posts: 2,701
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 1136 Post(s)
Liked 650 Times
in
336 Posts
Simplex controls.
I polished up the 26.6 JPR seatpost. It's a one bolt post unlike the more iconic 2 bolt JPR posts. Unfortunately it's going to be slightly too short for me so I will sell it.
I polished up the 26.6 JPR seatpost. It's a one bolt post unlike the more iconic 2 bolt JPR posts. Unfortunately it's going to be slightly too short for me so I will sell it.
Likes For TenGrainBread:
#25
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,513
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2422 Post(s)
Liked 4,395 Times
in
2,092 Posts