Quality Coaster Brake Hub.
#1
I bet
Thread Starter
Join Date: Dec 2003
Posts: 1,033
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Quality Coaster Brake Hub.
I have tried lots of different bikes-- fixed and single, i think i prefer a coaster brake. If you were going to spend some cash building up a nice light bike, possibly custom, and you wanted for whatever reason to make it a coaster brake bike, what hub would you use? And why?
#2
Senior Member
Join Date: Sep 2003
Location: Seattle, WA
Posts: 391
Bikes: Surly Steamroller, Rodriguez (custom SS)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by kurremkarm
I have tried lots of different bikes-- fixed and single, i think i prefer a coaster brake. If you were going to spend some cash building up a nice light bike, possibly custom, and you wanted for whatever reason to make it a coaster brake bike, what hub would you use? And why?
Regarding the choice of coaster brake? As I've mentioned in similar posts, I'm a big fan of anything Sachs like F&S (Fichtel & Sachs). Roller-clutch or cone-clutch, it doesn't matter. If you can score a Velosteel from the Czech Republic, do it. It's a Sachs roller-clutch design. Other great hubs are Perry, Sturmey-Archer SC-1 (really rare), and of coarse the Rolls Royce of hubs ... Morrow (These are tricky to service though). Others that I would ride include Bendix redline or older and New Departure (the one that started it all ... 1890's). Decent coaster brakes can be found at bike swap meets and cool bike shops ... like the sadly closed Bikesmith here in Seattle.
Keep us posted and let us know what you decide to do. If you can swing a custom I say go for it.
Take care
Jim
#3
coasterbrakelockup
Join Date: Nov 2004
Location: parts unknown
Posts: 824
Bikes: surly steamroller w/coaster brake, electra single speed cruiser, specialized rockhopper commuter, no-name single speed folder, 700c ultimate wheel, 24" unicycle, specialized bmx lsd, single seat single speed huffy tandem, pink upsidedown parade bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I'm building a coaster hub Steamroller as soon as they make some more 53cm frames (should be later this month, damn my stumpy legs). Probably going to use a new Shimano hub because it is inexpensive and every LBS knows how to work on them and can get parts.
Much love for the 700c coaster bikes!
Much love for the 700c coaster bikes!
Last edited by lz4005; 05-05-05 at 10:13 PM.
#4
Senior Member
Join Date: Sep 2004
Location: Minneapolis,MN
Posts: 432
Bikes: '97 HooKooEKoo + '75-'85 Fuji Regis fixie conversion.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Wow.
Imagine putting a coaster brake on a fixie.
Please talk about rollin' with a coaster. All I remember was being able to bust fat skids just about everywhere on the various garage sale bikes I had as a kid.
Imagine putting a coaster brake on a fixie.
Please talk about rollin' with a coaster. All I remember was being able to bust fat skids just about everywhere on the various garage sale bikes I had as a kid.
#5
Senior Member
Join Date: Apr 2004
Location: Suburban Boston
Posts: 473
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I built up a play bike over the winter and used a Shimano 3spd hub with a coaster brake. My knees won't be able to handle a fixie and I love the way they look. I admit that I have the use of all 3 speeds and use them but as far as the coaster brake, it is a ball. When I find a single speed freewheeling coaster brake the 3 spd will go.
#6
Senior Member
Join Date: Mar 2003
Location: Beaufort, South Carolina, USA and surrounding islands.
Posts: 8,521
Bikes: Cannondale R500, Motobecane Messenger
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Originally Posted by lz4005
I'm building a coaster hub Steamroller as soon as they make some more 53cm frames (should be later this month, damn my stumpy legs). Probably going to use a new Shimano hub because it is inexpensive and every LBS knows how to work on them and can get parts.
Much love for the 700c coaster bikes!
logan
Much love for the 700c coaster bikes!
logan
#7
Senior Member
Join Date: Mar 2005
Posts: 53
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I'm a big coaster brake fan and totally appreciate this thread and the good info. Its a dream of mine that someone will make a quality coaster brake hub in 135mm spacing.
We put on a coaster brake race every May in NYC - this year its coasties vs. fixies on a nice hilly circuit in Central Park.
-Dr. Hans
We put on a coaster brake race every May in NYC - this year its coasties vs. fixies on a nice hilly circuit in Central Park.
-Dr. Hans
#8
Senior Member
Join Date: Mar 2005
Posts: 53
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
By the way, this bike is now coaster brake equipped:
https://www.fixedgeargallery.com/2005/feb/noodleman.htm
https://www.fixedgeargallery.com/2005/feb/noodleman.htm
#9
Lord Carlton of Worksop
Join Date: Oct 2004
Location: Quebec
Posts: 151
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by DrHansNoodleman
By the way, this bike is now coaster brake equipped:
https://www.fixedgeargallery.com/2005/feb/noodleman.htm
https://www.fixedgeargallery.com/2005/feb/noodleman.htm
Hey doc, I've been compulsively checking up on your site, but nothing new. It's been promised for March, you know? I just can't wait to see more for your institute
#10
Guest
Posts: n/a
Mentioned: Post(s)
Tagged: Thread(s)
Quoted: Post(s)
Quick question: Can you come to a slow stop with a coaster brake or is it pretty much all skid? I remember my brothers had some cheap dirt bikes equiped with coaster brakes when I was a kid. All we ever did with them was skid. Good times. Some good wrecks, too.
I might end up going with something like this as I scare the ever-loving crap out of myself whenever I make a sharp turn on my fixed. Especially in traffic. Avoiding pedal-strike is the only thing I miss about my freewheel. I know it'd be easier to just change the way I corner. Which I am... slowly.
I might end up going with something like this as I scare the ever-loving crap out of myself whenever I make a sharp turn on my fixed. Especially in traffic. Avoiding pedal-strike is the only thing I miss about my freewheel. I know it'd be easier to just change the way I corner. Which I am... slowly.
#11
Eschew Obfuscation!
Join Date: Oct 2004
Location: over here!
Posts: 591
Bikes: 2005 Rocky Mountain ETSX, Surly Crosscheck, 2000 Enduro Expert (sold), 1999 Rockhopper, 1984 Trek 520 (STOLEN-but recovered!), $7 rigid MTB from a police auction (broken, then stolen)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Coaster brakes give pretty good modulation in my experience. But skidding is so much fun!
#12
Senior Member
Join Date: Mar 2005
Posts: 53
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Dear ETQC,
Apologies for the delay. We've switched to a quaternary metric calendar here at the Institute and its led to more than our share of foul-ups when transposing to solar dates. I'm still writing "northern mid-yule" on my checks! (<- just kidding).
In any case, a number of recent projects have kept our staff unusually busy and the situation has been exacerbated by the fact that Dr. Mastro-Grillo has been in Sydney and Tasmania for the past three weeks, doing research and attending a cycling training camp, respectively. I've also been quite busy myself securing a permit from the city and arranging necessary insurance for our race.
I hope things will be back on schedule soon, but feel free to send me your particulars and I will put you on our mailing list, and send you an official Institute patch.
Best wishes,
Dr. Hans
Apologies for the delay. We've switched to a quaternary metric calendar here at the Institute and its led to more than our share of foul-ups when transposing to solar dates. I'm still writing "northern mid-yule" on my checks! (<- just kidding).
In any case, a number of recent projects have kept our staff unusually busy and the situation has been exacerbated by the fact that Dr. Mastro-Grillo has been in Sydney and Tasmania for the past three weeks, doing research and attending a cycling training camp, respectively. I've also been quite busy myself securing a permit from the city and arranging necessary insurance for our race.
I hope things will be back on schedule soon, but feel free to send me your particulars and I will put you on our mailing list, and send you an official Institute patch.
Best wishes,
Dr. Hans
#13
Senior Member
Join Date: Jun 2003
Location: SW Ohio
Posts: 1,258
Bikes: Classic lugged-steel road, touring, shopping, semi-recumbent, gravel
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 46 Post(s)
Liked 81 Times
in
32 Posts
Scored a really nice-looking NOS coaster brake hub and a LBS. The shop was a Schwinn shop since probably the '50s or '60's before it was recently purchased (I think the former owner retired). They had to go into the deep, dark basement to retrive it!
It's never been laced to a wheel and it seems to be very high quality, not at all like the new cheapies. I don't know what brand it is and I would like to ID it. I can post pics if anybody's interested.
It's never been laced to a wheel and it seems to be very high quality, not at all like the new cheapies. I don't know what brand it is and I would like to ID it. I can post pics if anybody's interested.
#14
Senior Member
Join Date: Sep 2003
Location: Seattle, WA
Posts: 391
Bikes: Surly Steamroller, Rodriguez (custom SS)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by smurfy
Scored a really nice-looking NOS coaster brake hub and a LBS. The shop was a Schwinn shop since probably the '50s or '60's before it was recently purchased (I think the former owner retired). They had to go into the deep, dark basement to retrive it!
It's never been laced to a wheel and it seems to be very high quality, not at all like the new cheapies. I don't know what brand it is and I would like to ID it. I can post pics if anybody's interested.
It's never been laced to a wheel and it seems to be very high quality, not at all like the new cheapies. I don't know what brand it is and I would like to ID it. I can post pics if anybody's interested.
Back from my seagoing adventures. Please post pics, I'll try to ID it for you.
Jim
#15
Junior Member
Join Date: Apr 2005
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
There's a bike shop in NYC that's selling 700c coaster wheels on eBay for $50. They look good enough and for $50 it's hard to go wrong.
I rode a Bendix 700c wheel for -many- years. Easy to repack, sturdy, great for commuting since there's no need to take your hands off the bars if you want to scrub off a little speed.
I road that wheel up hills and down.
Just be sure to have some kind of alternate brake in case something weird happens to the hub. It's happened to me and it's no fun when a bike has no brakes.
Matthew
I rode a Bendix 700c wheel for -many- years. Easy to repack, sturdy, great for commuting since there's no need to take your hands off the bars if you want to scrub off a little speed.
I road that wheel up hills and down.
Just be sure to have some kind of alternate brake in case something weird happens to the hub. It's happened to me and it's no fun when a bike has no brakes.
Matthew
#16
Newbie
Join Date: Feb 2008
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
JimV said:
"I'm a big fan of anything Sachs like F&S (Fichtel & Sachs). Roller-clutch or cone-clutch,
it doesn't matter. If you can score a Velosteel from the Czech Republic, do it. It's a Sachs
roller-clutch design. Other great hubs are Perry, Sturmey-Archer SC-1 (really rare), and
of coarse the Rolls Royce of hubs ... Morrow (These are tricky to service though). Others
that I would ride include Bendix redline or older and New Departure (the one that started
it all ... 1890's). Decent coaster brakes can be found at bike swap meets and cool bike
shops ... like the sadly closed Bikesmith here in Seattle."
This is good advise: I would add J.C.Higgins (Sears bikes) hubs to the list. The older the better for typical coaster brake hubs, newer shimanos are cheaply made and have high rolling resistance. The Sachs Torpedo hub is possibly the closest thing to a "high-performance" C.B. hub, and I've read that, although they haven't been produced for decades, Velosteel has adopted the best elements of it's design. Velosteel, as far as I know, does not have a U.S. distributor, but they might sell a bunch of them directly. The Re-Cycle bike co-op here in Anchorage is considering building a fleet of coasties around the Velosteel hub to lend. My first coastie road bike effort cost 49 dollars and is comprised mostly a salvaged parts. It is very stiff and will get a bigger chainring and city tires in the summer. Here are some pics of my "track huffy":
https://23skidoo.org/gawk/v/treedan/b...eeds/coasties/
"I'm a big fan of anything Sachs like F&S (Fichtel & Sachs). Roller-clutch or cone-clutch,
it doesn't matter. If you can score a Velosteel from the Czech Republic, do it. It's a Sachs
roller-clutch design. Other great hubs are Perry, Sturmey-Archer SC-1 (really rare), and
of coarse the Rolls Royce of hubs ... Morrow (These are tricky to service though). Others
that I would ride include Bendix redline or older and New Departure (the one that started
it all ... 1890's). Decent coaster brakes can be found at bike swap meets and cool bike
shops ... like the sadly closed Bikesmith here in Seattle."
This is good advise: I would add J.C.Higgins (Sears bikes) hubs to the list. The older the better for typical coaster brake hubs, newer shimanos are cheaply made and have high rolling resistance. The Sachs Torpedo hub is possibly the closest thing to a "high-performance" C.B. hub, and I've read that, although they haven't been produced for decades, Velosteel has adopted the best elements of it's design. Velosteel, as far as I know, does not have a U.S. distributor, but they might sell a bunch of them directly. The Re-Cycle bike co-op here in Anchorage is considering building a fleet of coasties around the Velosteel hub to lend. My first coastie road bike effort cost 49 dollars and is comprised mostly a salvaged parts. It is very stiff and will get a bigger chainring and city tires in the summer. Here are some pics of my "track huffy":
https://23skidoo.org/gawk/v/treedan/b...eeds/coasties/
#19
Cornucopia of Awesomeness
Join Date: Oct 2004
Location: not where i used to be
Posts: 4,847
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
there's been a lot of thread necromancy these past couple of days.
i guess they fixed the search feature?
(I miss jimv)
i guess they fixed the search feature?
(I miss jimv)
#21
ub3r n00b
Join Date: Sep 2007
Location: Minnesota
Posts: 1,368
Bikes: Bianchi Via Nirone, Trek 6000SS, Zebrakanko FG
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I use a coaster on my S.S.. Looks just as hip as a fixie, but I can coast downhill. Love my fixie though too though..
#23
Boardwalk Loving
stepinthefunk, where did you get that coaster, it is sexy
#25
Senior Member
Join Date: Apr 2006
Location: corpus christi,texas
Posts: 423
Bikes: canondale silk trail--92 schwinn criss cross--sun atlas x type--fugi odessa--2018 trek domane ALR5 disc
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 47 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts