Bought new bike - question about switching to disc brakes
#1
Junior Member
Thread Starter
Join Date: Apr 2011
Posts: 10
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Bought new bike - question about switching to disc brakes
Hey all, first post here! I bought a new Schwinn Graft Pro bike from Canadian Tire and loving it so far. Just got it tuned at a bike shop. It has disc brakes on the from and the brake pads on the rear. Is it possible to switch the rear brakes to disc? Any idea how much a bike shop would charge? Or should I stick with what I got?
#2
Senior Member
Join Date: Apr 2007
Location: Munising, Michigan, USA
Posts: 4,131
Bikes: Priority 600, Priority Continuum, Devinci Dexter
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 685 Post(s)
Likes: 0
Liked 55 Times
in
37 Posts
I would stay with what you have. Most of your braking power comes from your front brakes. Running rim brakes in the rear doesn't really put you at any disadvantage.
I googled your bike. The photos make it look like there might be a disk brake mount at the back of your frame. Hard to tell, because the photos are taken from the right side of the bike.
It is likely that your hub is not a disk hub. Look to see whether you have a mount on the left of your rear hub having six screw holes arranged in a circle. If you have that mount, then you can put a disk on the wheel. Otherwise, you'll need a new wheel, plus the brakes, plus you'll need to run new brake cable, plus you'll need to pay someone to do that for you.
You just bought the bike. Honestly, I'd ride it as it is.
I googled your bike. The photos make it look like there might be a disk brake mount at the back of your frame. Hard to tell, because the photos are taken from the right side of the bike.
It is likely that your hub is not a disk hub. Look to see whether you have a mount on the left of your rear hub having six screw holes arranged in a circle. If you have that mount, then you can put a disk on the wheel. Otherwise, you'll need a new wheel, plus the brakes, plus you'll need to run new brake cable, plus you'll need to pay someone to do that for you.
You just bought the bike. Honestly, I'd ride it as it is.
#3
Junior Member
Thread Starter
Join Date: Apr 2011
Posts: 10
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
It has two screws to mount the disc brake but there is no places for six screws. But there is space between the wheel and the frame so maybe they could add something so that I wouldn't need a new wheel.
#4
Senior Member
Join Date: Jul 2002
Posts: 6,956
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 6 Times
in
5 Posts
You'd need a new wheel. Throwing out some estimated numbers, you might spend $100ish for the wheel, $50ish for an Avid BB7 brake kit, $40ish for labor. I agree with JG that it's not that beneficial, so I'd just run the rear V-brake.
#7
Full Member
Join Date: Jun 2010
Location: Orangeville, Ontario
Posts: 388
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
i agree with everyone. it is not worth the money to upgrade it. i have disk brakes in the front and rim brakes in the back on my bike and the rim brakes work great as long as they are dry but if it was pouring rain they suck. the disk brakes in the front is all you really need. mine seem to stop my bike with my trailer behind it with not a problem.
#8
Full Member
Join Date: Jun 2010
Location: Orangeville, Ontario
Posts: 388
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hey all, first post here! I bought a new Schwinn Graft Pro bike from Canadian Tire and loving it so far. Just got it tuned at a bike shop. It has disc brakes on the from and the brake pads on the rear. Is it possible to switch the rear brakes to disc? Any idea how much a bike shop would charge? Or should I stick with what I got?