multi-tool?
#1
Junior Member
Thread Starter
Join Date: Jun 2020
Posts: 17
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 13 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
multi-tool?
Hi folks,
I'm a few months into cycling and am slowly building up my tools/equipment arsenal that I carry with me when I am biking. So far i have a spare inner tube, mini-pump with built in gauge, tire levers and bike lock. From the videos/articles I've read it sounds like a good multi-tool is in order, specifically with a 'chain breaker', I assume so that if the chain snaps I can break off the broken link and reattach the chain and limp home?
Any recommendations for a good tool to get? A search of Amazon for "bicycle multitool with chain tool" shows lots of options, not sure if there is a good recommendation out there. I will also need to watch some videos on how to do this if it happens to me.
Finally, any recs on additional tools or parts that are most haves. I'm gradually increasing the distances I am riding and don't want to get caught out there.
Thanks!
Nathan
I'm a few months into cycling and am slowly building up my tools/equipment arsenal that I carry with me when I am biking. So far i have a spare inner tube, mini-pump with built in gauge, tire levers and bike lock. From the videos/articles I've read it sounds like a good multi-tool is in order, specifically with a 'chain breaker', I assume so that if the chain snaps I can break off the broken link and reattach the chain and limp home?
Any recommendations for a good tool to get? A search of Amazon for "bicycle multitool with chain tool" shows lots of options, not sure if there is a good recommendation out there. I will also need to watch some videos on how to do this if it happens to me.
Finally, any recs on additional tools or parts that are most haves. I'm gradually increasing the distances I am riding and don't want to get caught out there.
Thanks!
Nathan
#2
Quidam Bike Super Hero
Join Date: Jan 2019
Location: Stone Mountain, GA (Metro Atlanta, East)
Posts: 1,135
Bikes: 1995 Trek 800 Sport, aka, "CamelTrek"
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 331 Post(s)
Liked 415 Times
in
282 Posts
Do a search, on this site, for multi-tool and you should find a thread or two.
Me, I love my Boyz, that looks just like this one https://www.aliexpress.com/item/4000...archweb201603_
Me, I love my Boyz, that looks just like this one https://www.aliexpress.com/item/4000...archweb201603_
#3
FLIR Kitten to 0.05C
Join Date: Sep 2014
Location: Lincoln, Nebraska
Posts: 5,331
Bikes: Roadie: Seven Axiom Race Ti w/Chorus 11s. CX/Adventure: Carver Gravel Grinder w/ Di2
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 2349 Post(s)
Liked 406 Times
in
254 Posts
If you can find it--Topeak Alien 2. Emphasis 2. NOT the 3. The 2. The difference being that the newer one is made out of steel that rusts.
#4
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,084
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4205 Post(s)
Liked 3,863 Times
in
2,311 Posts
In the 52 years of riding multi geared bikes I have only needed a chain tool twice. One of those times was on a tandem. I don't bother to carry one (excepting my self contained multi day tours). I also don't carry a multi tool and instead a Swiss Army knife and the few "L" hex wrenches each bike needs (besides the correct fitting spoke wrench and tire levers). Andy
__________________
AndrewRStewart
AndrewRStewart
#5
Senior Member
Join Date: Sep 2004
Location: Chicago area
Posts: 2,551
Bikes: Airborne "Carpe Diem", Motobecane "Mirage", Trek 6000, Strida 2, Dahon "Helios XL", Dahon "Mu XL", Tern "Verge S11i"
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 980 Post(s)
Liked 582 Times
in
399 Posts
Me, I love my Boyz, that looks just like this one https://www.aliexpress.com/item/4000...archweb201603_
Likes For sweeks:
#6
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
In the 52 years of riding multi geared bikes I have only needed a chain tool twice. One of those times was on a tandem. I don't bother to carry one (excepting my self contained multi day tours). I also don't carry a multi tool and instead a Swiss Army knife and the few "L" hex wrenches each bike needs (besides the correct fitting spoke wrench and tire levers). Andy
#7
Senior Member
Im fairly certain any multi tool from a recognisable manufacturer will do the job. Just make sure it has tools that fit Your bike. Me - I stopped carrying tools besides tyre levers. Never needed any except on severely neglected bikes. Imo, preemptive maintenance is where its at :-) Note, some jobs need some length to the tools, jike moving the brifters.
#8
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
Im fairly certain any multi tool from a recognisable manufacturer will do the job. Just make sure it has tools that fit Your bike. Me - I stopped carrying tools besides tyre levers. Never needed any except on severely neglected bikes. Imo, preemptive maintenance is where its at :-) Note, some jobs need some length to the tools, jike moving the brifters.
My tools get most of their use helping out other riders who have none....
#9
Really Old Senior Member
The only good multi tool is a dead......
#10
Non omnino gravis
The only "multi-tool" I bother to carry. It's in my Lezyne Roll Caddy, in my middle jersey pocket, every ride, regardless of ride length/duration.
As it uses standard 1/4" bits, you fill the plastic holder with only the bits you need.
As it uses standard 1/4" bits, you fill the plastic holder with only the bits you need.
#11
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
The lightest, least expensive and most utilitarian multi-tool I know of is the Park MT-1 "dogbone". It has all of the commonly needed hex bits, a small screwdriver and some useful box wrenches, is very small and light and fits in any pocket or pack. It does not have a chain breaker but the CT-5 will do fine if you need one. I've used my chain tool twice in 35 years, each time to repair another rider's chain.
#12
Full Member
I use the Topeak Hexus II. A little heavy I suppose, but it gets the job done when i've had things go wrong.
#13
Senior Member
Join Date: Feb 2012
Location: Golden, CO and Tucson, AZ
Posts: 2,837
Bikes: 2016 Fuji Tread, 1983 Trek 520
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 676 Post(s)
Liked 741 Times
in
430 Posts
I have the Park I-beam Mini, and I've only used it on others' bikes. But I also agree with those who carry a few Allens and a small screwdriver. I'd suggest a spoke wrench too.
I decided to start carrying a chain break (and spare link) when I got a nine speed, after hearing they're more likely to break. My day trips tend to be in remote places in mountainous terrain with no cell service.
I've met people carrying tools who have no idea how to use them.
I decided to start carrying a chain break (and spare link) when I got a nine speed, after hearing they're more likely to break. My day trips tend to be in remote places in mountainous terrain with no cell service.
I've met people carrying tools who have no idea how to use them.
#14
Banned
Most bike shops have an assortment by now.. you look and decide what tools you need to have with you at all times..
#15
Senior Member
I might have an Alien II (or maybe it's the original Alien) for sale, if interested. However, I no longer use a multi-tool. I prefer "real" versions of each tool I know I might need on the road. The chain-breakers on multi-tools are never as good as the separate ones you can carry in very little space. I've always found the wrenches and screwdrivers kind of inferior, too.
#16
Senior Member
Join Date: Jun 2020
Location: Maryland
Posts: 1,380
Bikes: 1982 Bianchi Sport SX, Rayleigh Tamland 1, Rans V-Rex recumbent, Fuji MTB, 80's Cannondale MTB with BBSHD ebike motor
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 668 Post(s)
Liked 529 Times
in
355 Posts
Crankbrothers M17. Have one for every bike. Spoke wrench, emergency chain tool, allen keys, torx bit for rotors and even a crappy but effective selection of emergency open end wrenches.
Like someone said many times is it me working on other people's bikes. Bit of hubris to think even a well maintained bike won't need a fix or some sort of adjustment on the road every now and then. Especially when riding for days.
Like someone said many times is it me working on other people's bikes. Bit of hubris to think even a well maintained bike won't need a fix or some sort of adjustment on the road every now and then. Especially when riding for days.
#17
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,636
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4733 Post(s)
Liked 1,532 Times
in
1,003 Posts
I'm in the camp that a chain breaker sounds like a good idea, but it's also a tool I've never ever needed in decades of riding. For day rides from home, this one has had everything I've ever needed
SKS TOM-7 MULTI-TOOL
SKS TOM-7 MULTI-TOOL
#18
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,362
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6219 Post(s)
Liked 4,218 Times
in
2,365 Posts
Hi folks,
I'm a few months into cycling and am slowly building up my tools/equipment arsenal that I carry with me when I am biking. So far i have a spare inner tube, mini-pump with built in gauge, tire levers and bike lock. From the videos/articles I've read it sounds like a good multi-tool is in order, specifically with a 'chain breaker', I assume so that if the chain snaps I can break off the broken link and reattach the chain and limp home?
Any recommendations for a good tool to get? A search of Amazon for "bicycle multitool with chain tool" shows lots of options, not sure if there is a good recommendation out there. I will also need to watch some videos on how to do this if it happens to me.
Finally, any recs on additional tools or parts that are most haves. I'm gradually increasing the distances I am riding and don't want to get caught out there.
Thanks!
Nathan
I'm a few months into cycling and am slowly building up my tools/equipment arsenal that I carry with me when I am biking. So far i have a spare inner tube, mini-pump with built in gauge, tire levers and bike lock. From the videos/articles I've read it sounds like a good multi-tool is in order, specifically with a 'chain breaker', I assume so that if the chain snaps I can break off the broken link and reattach the chain and limp home?
Any recommendations for a good tool to get? A search of Amazon for "bicycle multitool with chain tool" shows lots of options, not sure if there is a good recommendation out there. I will also need to watch some videos on how to do this if it happens to me.
Finally, any recs on additional tools or parts that are most haves. I'm gradually increasing the distances I am riding and don't want to get caught out there.
Thanks!
Nathan
The original
I also have (but can’t currently find) two wrenches that could fit in the jaws of the adjustable wrench and could be used on headsets and as a hook scanner. It was a necessary tool before the invention of the threadless headset as threaded headsets loosen during the rigors of mountain biking.
Gerber bought the rights in the mid90s and made a bunch of different add-ons/alternative tools. None of them were quite as good as the original, although quite innovative.
The bottom one went into a seatpost.
In the modern era, I’ve found I don’t need the adjustable wrench since most everything now uses cap screws. Now I carry the Fix-It-Sticks mountain bike version. It’s a very clever, compact design.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Likes For cyccommute:
#19
Banned
Join Date: Apr 2010
Location: Lincoln Ne
Posts: 9,924
Bikes: RANS Stratus TerraTrike Tour II
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 3352 Post(s)
Liked 1,056 Times
in
635 Posts
Along with a bike multi tool, I carry a leatherman multi tool, and a 6' inch crescent. Out on the trails amazingly enough I have used the 6" crescent wrench the most helping other people.
#20
Senior Member
I'm going to go against the grain and mention that I actually rather like multi tools, and I'm a pro mechanic for whatever that's worth. My bikes don't go out of the door unless they're running well (if they aren't, I have options!) so I suffer very few mechanicals, but I have definitely used my chain tool before on the trail. If you don't need a chain tool incredibly often, I actually think that relying on a multi tool chain tool even for home repair can be acceptable with better tools (I did this for years of personal bike maintenance before I started working professionally) if you're not using them very often (ie, personal bike maintenance). I have a bunch of bikes and don't own enough sets of everything for each one to have its own dedicated tools and flat kit, and multi tools are a lot easier to pack.
I like my Park IB-3 reasonably well. Chain tool is rated to 12sp (though probably not AXS chains) and I like the integrated tire lever that works as the handle for the chain tool and functions as the spoke wrench as well. I keep a spare quick link and der hanger taped to the saddle rails of each bike, also tape a tube to some of them, and so there's very little to grab to go on a ride on anything in the stable. The ergonomics are fine-ish, but I wouldn't overhaul a bike with it, and I'd probably choose something different for a long distance, self supported tour.
Had a Crankbrothers M17 forever also and liked it well. Was sad when it slipped out of my pocket on a ride.
I like my Park IB-3 reasonably well. Chain tool is rated to 12sp (though probably not AXS chains) and I like the integrated tire lever that works as the handle for the chain tool and functions as the spoke wrench as well. I keep a spare quick link and der hanger taped to the saddle rails of each bike, also tape a tube to some of them, and so there's very little to grab to go on a ride on anything in the stable. The ergonomics are fine-ish, but I wouldn't overhaul a bike with it, and I'd probably choose something different for a long distance, self supported tour.
Had a Crankbrothers M17 forever also and liked it well. Was sad when it slipped out of my pocket on a ride.