'72 Schwinn Sports Tourer rebuild ques: rims
#1
Rebuilding
Thread Starter
Join Date: Jun 2018
Location: New Rockford, North Dakota
Posts: 24
Bikes: Schwinns: 72 Sports Tourer, 74? Super Sport; Tresome 2.0 Hybrid
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
'72 Schwinn Sports Tourer rebuild ques: rims
I'm cleaning the rims of my garage-sale bike. Weimann, Belguim, I think they're aluminum.
Can I use fine steel wool to clean/polish them or will it scratch them?
Do I finish with regular chrome polish?
KCC
Can I use fine steel wool to clean/polish them or will it scratch them?
Do I finish with regular chrome polish?
KCC
#2
Senior Member
The rims are indeed aluminum. Steel wool will scratch, you'll find excellent tips and tricks for polishing aluminum here: https://www.bikeforums.net/classic-v...ng-thread.html
#3
Senior Member
I use brass wool. Hard to find. If you do use steel wool, make sure it is 0000 grade, the finest available. Also a good lubricant like WD-40 with it.
There’s many ways to work the rims.
There’s many ways to work the rims.
#4
Senior Member
Join Date: Nov 2011
Location: Port Angeles, WA
Posts: 7,922
Bikes: A green one, "Ragleigh," or something.
Mentioned: 194 Post(s)
Tagged: 0 Thread(s)
Quoted: 1627 Post(s)
Liked 630 Times
in
356 Posts
If you just want to clean them, dish soap and water and good stiff toothbrush will do. Diluted SoftScrub and the same toothbrush, Bon Ami and the same toothbrush, etc. Any of those will get 'er done for a satin-finish alloy rim.
If you also want to polish them, then consult the previously mentioned polishing thread. Some rims aren't made to take a mirror finish polish, though.
If you also want to polish them, then consult the previously mentioned polishing thread. Some rims aren't made to take a mirror finish polish, though.
__________________
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
#5
Rebuilding
Thread Starter
Join Date: Jun 2018
Location: New Rockford, North Dakota
Posts: 24
Bikes: Schwinns: 72 Sports Tourer, 74? Super Sport; Tresome 2.0 Hybrid
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Thanks
Wow! KHatfull's link answers so much more than my question -thanks. Now all I have to follow his advice.
KCC
KCC
#6
Ride, Wrench, Swap, Race
Join Date: Jan 2010
Location: Northern California
Posts: 9,194
Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.
Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1565 Post(s)
Liked 1,296 Times
in
866 Posts
Often even a very dull aluminum surface is actually well-polished underneath but a very thin layer of easily-dissolved aluminum oxide.
So be careful not to start by scratching the hidden, very fine surface(!), as it takes a ton of work to remove scratches.
Start by testing a small section using a liberal amount of Blue Magic, SimiChrome or similar highly-effective product, and then you will know for sure how to proceed.
So be careful not to start by scratching the hidden, very fine surface(!), as it takes a ton of work to remove scratches.
Start by testing a small section using a liberal amount of Blue Magic, SimiChrome or similar highly-effective product, and then you will know for sure how to proceed.
#7
Mike J
Join Date: Nov 2013
Location: Jacksonville Florida
Posts: 1,588
Bikes: 1975 Peugeot PX-50L, 1971 Peugeot PX-10, 1974 Peugeot PX-8
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 392 Post(s)
Likes: 0
Liked 6 Times
in
6 Posts
I doubly agree with this, using dry 0000-grade steel wool will do a bit of cleaning, and leave a more dull finish, but when done with WD-40 on the wool, it both removes scratches and polishes nicely, then you can follow-up with a polishing compound or a polishing wax for a mirror-like shine.