New wheelset advice
#1
Newbie
Thread Starter
Join Date: Sep 2023
Location: Basel, Switzerland
Posts: 4
Bikes: 2014 Specialized Allez Elite; 2018 Bergamont Sweep 8.0
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
New wheelset advice
Hello everyone,
I own stock Specialized Allez Elite 2014 road bike, with Tiagra groupset and AXIS Classic wheels.
The rims are now worn by the brake pads and I guess I need to change them.
Could you please advice what could be better wheels upgrade on a budged, from following options:
1. Mavic Aksium
2. Fulcrum Racing 5
3. Fulcrum Racing 6
4. Shimano WH-R501
Or maybe you could propose another option
Thank you very much for your input.
I own stock Specialized Allez Elite 2014 road bike, with Tiagra groupset and AXIS Classic wheels.
The rims are now worn by the brake pads and I guess I need to change them.
Could you please advice what could be better wheels upgrade on a budged, from following options:
1. Mavic Aksium
2. Fulcrum Racing 5
3. Fulcrum Racing 6
4. Shimano WH-R501
Or maybe you could propose another option
Thank you very much for your input.
#2
Junior Member
Join Date: May 2014
Location: Saint Louis, MO
Posts: 96
Bikes: 2011 Cannondale SuperSix 3, 1987 Raleigh Technium 440
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 22 Post(s)
Likes: 0
Liked 30 Times
in
16 Posts
I have been looking at wheelsets too, since my original Mavic Aksiums don't stay so true anymore, and had some loose spokes which were tensioned up by the LBS. They have not been reliable from a staying true point, maybe 9000 total miles on them. They recommended going to a 32 spoke wheelset,. Nothing fancy, but they source their sets from their established wheelbuilder. They can build their own too. Recommended DT Swiss rims with Shimano or DT Swiss hubs, ~$450 for a starting set. No reason to break the bank on my 2011 bike, but I trust the owner of the shop, as he knows what parts are reliable, and is super helpful on all things bike and non-bike related and doesn't try to just sell me stuff. I plan on riding this bike another 10 years. I have also been using the prowheelbuilder.com website based on his recommendations of suppliers. I could spend $1000 or more but seems overkill for the type and amount of riding I do. I am currently 200# but have been from 175 - 230. I know, a wide delta. Ideal cycling weight would be 170- 175#.
Last edited by macattack71; 10-16-23 at 05:53 PM.
#3
Still trying
Your body weight would be a big help, along with how much you ride and in general how smooth or abusive your local roads are. I like Mavic wheels a lot, for my 130lbs wife ...
#4
Newbie
Thread Starter
Join Date: Sep 2023
Location: Basel, Switzerland
Posts: 4
Bikes: 2014 Specialized Allez Elite; 2018 Bergamont Sweep 8.0
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I am currently 75kg (165lbs).
I ride around 2 hours per day, for 3 days a week, but I expect to have more free time in the future.
Usually I ride on asphalt, but sometimes I have to cross railroad tracks on the bike.
I ride around 2 hours per day, for 3 days a week, but I expect to have more free time in the future.
Usually I ride on asphalt, but sometimes I have to cross railroad tracks on the bike.
#5
Senior Member
Join Date: Jul 2007
Location: South shore, L.I., NY
Posts: 6,890
Bikes: Flyxii FR322, Cannondale Topstone, Miyata City Liner, Specialized Chisel, Specialized Epic Evo
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 3245 Post(s)
Liked 2,092 Times
in
1,184 Posts
I would be calling a shop that can custom build, Universal Cycles builds good wheels. Tell them what you have, your weight and riding style and have them recommend something they can build up. A hand built from a shop is always better than a factory wheel.
#6
Over the hill
Join Date: Mar 2006
Location: Los Angeles, CA
Posts: 24,376
Bikes: Giant Defy, Giant Revolt
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 998 Post(s)
Liked 1,206 Times
in
692 Posts
OP's profile says they're in Switzerland, so getting custom wheels shipped from USA (I assume the Universal Cycles referenced is the one in Oregon) is probably not very budget minded. However, getting handbuilt wheels could still be an option, especially if the current hubs are still in good condition. Rims, spokes, and labor should come up to about the same as the models the OP listed, and will likely be more durable.
__________________
It's like riding a bicycle
It's like riding a bicycle
Likes For urbanknight:
#7
Senior Member
Join Date: Apr 2019
Location: UK
Posts: 1,404
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 682 Post(s)
Liked 453 Times
in
338 Posts
OP's profile says they're in Switzerland, so getting custom wheels shipped from USA (I assume the Universal Cycles referenced is the one in Oregon) is probably not very budget minded. However, getting handbuilt wheels could still be an option, especially if the current hubs are still in good condition. Rims, spokes, and labor should come up to about the same as the models the OP listed, and will likely be more durable.
I had the fulcrum 5s. They were ok but I quickly upgraded. Think the Mavics are probably better. My son has them on his bike. Freehub has got sticky but that’s a £25 fix after 8+ years of use. Or as others have said, if your hubs are ok maybe a shop can put some new rims on.
#8
Senior Member
Join Date: Jul 2007
Location: South shore, L.I., NY
Posts: 6,890
Bikes: Flyxii FR322, Cannondale Topstone, Miyata City Liner, Specialized Chisel, Specialized Epic Evo
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 3245 Post(s)
Liked 2,092 Times
in
1,184 Posts
OP's profile says they're in Switzerland, so getting custom wheels shipped from USA (I assume the Universal Cycles referenced is the one in Oregon) is probably not very budget minded. However, getting handbuilt wheels could still be an option, especially if the current hubs are still in good condition. Rims, spokes, and labor should come up to about the same as the models the OP listed, and will likely be more durable.
Likes For Steve B.:
#9
Senior Member
Join Date: Dec 2019
Location: 757
Posts: 11,255
Bikes: Madone, Emonda, 5500, Ritchey Breakaway
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 10238 Post(s)
Liked 5,189 Times
in
2,226 Posts
Campy zonda if you can find them on sale. I have seen them sub 500.00
#11
Senior Member
Join Date: Dec 2019
Location: 757
Posts: 11,255
Bikes: Madone, Emonda, 5500, Ritchey Breakaway
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 10238 Post(s)
Liked 5,189 Times
in
2,226 Posts
#12
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 15,004
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6199 Post(s)
Liked 4,816 Times
in
3,323 Posts
If you are riding fast and somewhat long distances, you might want a rim that will add more aerodynamic benefit to the tire widths you run on the bike.
#13
Senior Member
Join Date: Jul 2009
Posts: 5,956
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3958 Post(s)
Liked 7,312 Times
in
2,951 Posts
Likes For tomato coupe:
#14
Still trying
FWIW, I've had very good experiences with Hunt wheelsets. They've been reasonable weight, roll quite nicely, and are well built, so far always having showed up properly trued and tensioned.
https://us.huntbikewheels.com/produc...-28deep-22wide
https://us.huntbikewheels.com/produc...-28deep-22wide
Likes For hankj:
#16
Senior Member
Join Date: Mar 2006
Location: Chicago, IL, USA
Posts: 2,881
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 1461 Post(s)
Liked 1,486 Times
in
870 Posts
You can find generic Chinese rim-brake carbon wheels from brands Superteam or Yoeleo for less than $300 online.
Even if you don't care about aero or weight, these wheels make a compelling option for a basic replacement wheelset on an older bike. I've owned both entry-level alloy wheels from Shimano and own a pair of Superteam carbon wheels.
Even if you don't care about aero or weight, these wheels make a compelling option for a basic replacement wheelset on an older bike. I've owned both entry-level alloy wheels from Shimano and own a pair of Superteam carbon wheels.
#17
Senior Member
Join Date: Jul 2006
Location: Lebanon (Liberty Hill), CT
Posts: 8,473
Bikes: CAAD 12, MASI Gran Criterium S, Colnago World Cup CX & Guru steel
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 1743 Post(s)
Liked 1,281 Times
in
740 Posts
I have two sets of Aksiums. They are bullet proof but a little heavy. The others I don't know well. I have become a convert to tubeless and love my Kysrium Elite USTs. I have 4 sets and haven't had a flat in 5 years.
#18
Mother Nature's Son
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 3,118
Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 854 Post(s)
Liked 1,439 Times
in
820 Posts
I have owned both Fulcrum Racing 5 and Campagnolo Zonda wheel sets. The Zonda's are FAR superior. The Racing 5 that I have seen have too low of a spoke count and are not durable. The OP, being in Europe, may still be able to acquire Zonda's at a decent price. Personally, I am more concerned with how well the wheels will hold up, rather than the weight, which also plays into budget.
Just checked, Chain Reaction Cycles, located in England, have Zonda wheels with Shimano free hub for $411 shipped. If that is too steep, Sirocco is another good choice, but the Shimano free hub is out of stock at CRC.
Just checked, Chain Reaction Cycles, located in England, have Zonda wheels with Shimano free hub for $411 shipped. If that is too steep, Sirocco is another good choice, but the Shimano free hub is out of stock at CRC.
Last edited by delbiker1; 10-19-23 at 07:22 AM.
#19
Senior Member
Join Date: Aug 2004
Location: Prague, Czech Republic
Posts: 2,751
Bikes: Merlin Extra Light, Orbea Orca, Ritchey Outback,Tomac Revolver Mountain Bike, Cannondale Crit 3.0 now used for time trials.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 126 Post(s)
Liked 55 Times
in
34 Posts
Zonda's are excellent wheels, particularly for the price. I found them for a little bit over 300 Euro for rim brakes. To the OP, keep your brake pads clean and free from pebbles and stuff that gets stuck in the slots. A small flat blade screw driver works well for doing this.
#20
Senior Member
Join Date: Jan 2023
Location: Eastern Shore MD
Posts: 886
Bikes: Lemond Zurich/Trek ALR/Giant TCX/Sette CX1
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 571 Post(s)
Liked 773 Times
in
404 Posts
1600g and 30mm deep is not bad for the price or for aluminum wheels in general.
I just need to see if they make new ones that will fit the 2001 frame/drivetrain. I think its a 9 speed.
#21
Newbie
Thread Starter
Join Date: Sep 2023
Location: Basel, Switzerland
Posts: 4
Bikes: 2014 Specialized Allez Elite; 2018 Bergamont Sweep 8.0
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have owned both Fulcrum Racing 5 and Campagnolo Zonda wheel sets. The Zonda's are FAR superior. The Racing 5 that I have seen have too low of a spoke count and are not durable. The OP, being in Europe, may still be able to acquire Zonda's at a decent price. Personally, I am more concerned with how well the wheels will hold up, rather than the weight, which also plays into budget.
Just checked, Chain Reaction Cycles, located in England, have Zonda wheels with Shimano free hub for $411 shipped. If that is too steep, Sirocco is another good choice, but the Shimano free hub is out of stock at CRC.
Just checked, Chain Reaction Cycles, located in England, have Zonda wheels with Shimano free hub for $411 shipped. If that is too steep, Sirocco is another good choice, but the Shimano free hub is out of stock at CRC.
#22
Senior Member
Join Date: Jul 2009
Posts: 5,956
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3958 Post(s)
Liked 7,312 Times
in
2,951 Posts
I have owned both Fulcrum Racing 5 and Campagnolo Zonda wheel sets. The Zonda's are FAR superior. The Racing 5 that I have seen have too low of a spoke count and are not durable. The OP, being in Europe, may still be able to acquire Zonda's at a decent price. Personally, I am more concerned with how well the wheels will hold up, rather than the weight, which also plays into budget.
Just checked, Chain Reaction Cycles, located in England, have Zonda wheels with Shimano free hub for $411 shipped. If that is too steep, Sirocco is another good choice, but the Shimano free hub is out of stock at CRC.
Just checked, Chain Reaction Cycles, located in England, have Zonda wheels with Shimano free hub for $411 shipped. If that is too steep, Sirocco is another good choice, but the Shimano free hub is out of stock at CRC.
#23
Senior Member
Join Date: Jun 2002
Location: Montreal, Quebec
Posts: 5,932
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1821 Post(s)
Liked 1,697 Times
in
977 Posts
Note: Fulcrum wheels are manufactured by Campagnolo. Equivalent to the Zonda would be the Racing 3. The Fulcrum racing zero is equivalent to the Campagnolo Shamal
#25
Newbie
Thread Starter
Join Date: Sep 2023
Location: Basel, Switzerland
Posts: 4
Bikes: 2014 Specialized Allez Elite; 2018 Bergamont Sweep 8.0
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have found a new old stock Fulcrum Racing 3 C17 rear wheel at a very good price.
Does it make sense for me to change the rear wheel only?
My current wheel set is 622 x 15C (700C) + 700x25c tyres, and Fulcrum comes with 17mm rim profile + 700x28c Continental tyre.
Does it make sense for me to change the rear wheel only?
My current wheel set is 622 x 15C (700C) + 700x25c tyres, and Fulcrum comes with 17mm rim profile + 700x28c Continental tyre.