Pedros tire levers
#1
we be rollin'
Thread Starter
Pedros tire levers
Just a heads up if anyone wants thicker, wider tire levers. I know Schwalbe seems to have changed their tolerances because I know the Schwalbe Land Cruiser is medium-fitting in my opinion but yesterday I took off (with a considerable amount of force) some tight Schwalbe 26" Ranger Cruiser tires on some Rhyno Lite rims. It was EXTREMELY tight and the only time in my life I had tires installed at a bike shop. Anyway, let's see if I can add a picture. (By the way, the Maxxis Overdrive Excel tires were loose-fitting so I was able to install them myself on the Rhyno Lites even though it took some effort.) (This is not a paid ad, just grateful I got them.)
Pedros tire levers
Pedros tire levers
#2
Senior Member
Join Date: Jun 2020
Location: Maryland
Posts: 1,379
Bikes: 1982 Bianchi Sport SX, Rayleigh Tamland 1, Rans V-Rex recumbent, Fuji MTB, 80's Cannondale MTB with BBSHD ebike motor
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 667 Post(s)
Liked 529 Times
in
355 Posts
Pedros makes some good stuff.
I have a pair of steel Park Tool irons for emergencies.
I have a pair of steel Park Tool irons for emergencies.
Likes For freeranger:
#5
On Your Left
Join Date: Nov 2011
Location: Long Island, New York, USA
Posts: 8,373
Bikes: Trek Emonda SLR, Sram eTap, Zipp 303
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 3004 Post(s)
Liked 2,433 Times
in
1,187 Posts
Personally, I like the Park plastic levers.
#6
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,463
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4332 Post(s)
Liked 3,955 Times
in
2,644 Posts
At one of the shops I managed I had mechanics start dating each Pedros lever because it felt like they were going through a pair a week. I prefer to use the Crank Brothers Speedier Lever. Way easier to use no harm to the knuckles and has an install side for those tougher beads. I rarely need two levers from them and my personal main use lever is now 7 years old or so.
Likes For veganbikes:
#7
Senior Member
At one of the shops I managed I had mechanics start dating each Pedros lever because it felt like they were going through a pair a week. I prefer to use the Crank Brothers Speedier Lever. Way easier to use no harm to the knuckles and has an install side for those tougher beads. I rarely need two levers from them and my personal main use lever is now 7 years old or so.
Likes For katsup:
#8
Senior Member
Join Date: Feb 2020
Posts: 302
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 164 Post(s)
Likes: 0
Liked 44 Times
in
41 Posts
at home i just use a lonf wide flat head screw driver wrapped in electrical tape , best tire lever i have , on the road i carry a metal lever and a plastic one both from wal mart extra cheap !!
#9
Senior Member
Join Date: Jun 2020
Location: Maryland
Posts: 1,379
Bikes: 1982 Bianchi Sport SX, Rayleigh Tamland 1, Rans V-Rex recumbent, Fuji MTB, 80's Cannondale MTB with BBSHD ebike motor
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 667 Post(s)
Liked 529 Times
in
355 Posts
Anyone have any luck with one of these? Got one cause it looked like a great tool, but the couple of times I tried to use it didn't work out so well. IIRC could never get the hook end to stay on the edge of the bead. Ended up going back to just thumbs.
#10
Newbie racer
Join Date: Feb 2018
Posts: 3,406
Bikes: Propel, red is faster
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 1575 Post(s)
Liked 1,569 Times
in
974 Posts
No matter the lever, keeping the tire in the rim bed where you aren't currently working on it is key. Sometimes you think it is, but it isn't. Then I'll see that and fix it by putting it back in the bed, and it gives me that bit extra.
I use the pedros. Usually just to get em off quicker. Working the tire into the bed usually makes it so I can get it with fingers. Well, if the fingers as dripping in sweat on a hot day.......back to pedros!
I use the pedros. Usually just to get em off quicker. Working the tire into the bed usually makes it so I can get it with fingers. Well, if the fingers as dripping in sweat on a hot day.......back to pedros!
#11
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,004
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times
in
806 Posts
Back when I started, tire levers were chromed steel. Plastic wouldn't have been considered by anyone.
Fast forward 45 years, and you find that Pedro's levers are indeed the best lever made. No question.
I also have two of the Crank Brothers Speedier, a useful tool for quick re-seating of the second bead. And I have a KoolStop tire bead jack that I carry on my commuter because Schwalbe Marathon Plus tires are difficult to change/mount. Fortunately, flats are rare with those tires.
Fast forward 45 years, and you find that Pedro's levers are indeed the best lever made. No question.
I also have two of the Crank Brothers Speedier, a useful tool for quick re-seating of the second bead. And I have a KoolStop tire bead jack that I carry on my commuter because Schwalbe Marathon Plus tires are difficult to change/mount. Fortunately, flats are rare with those tires.
Likes For Phil_gretz:
#12
vespertine member
Join Date: Jul 2013
Location: Land of Angora, Turkey
Posts: 2,476
Bikes: Yes
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 687 Post(s)
Liked 220 Times
in
163 Posts
I'm also a fan of the Pedros levers for stiff, nasty, wire bead tires. I've broken my share of tire levers, but my first pair of Pedros is still going strong. (And they're pink, so everyone knows that they're tough.)
Likes For wipekitty:
#13
Full Member
Join Date: Oct 2019
Location: Foothills of West Central Maine
Posts: 410
Bikes: 2007 Motobecane Fantom Cross Expert, 2020 Motobecane Omni Strada Pro Disc (700c gravel bike), 2021 Motobecane Elite Adventure with Bafang 500W rear hub drive
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 174 Post(s)
Likes: 0
Liked 143 Times
in
94 Posts
First time I tried it on a new foldable Conti Gatorskin it bent my rim and didn't get the tire on. Granted it was an old rim with worn brake surfaces, but still disappointing. The incident did teach me the virtues of soapy water, which is how I finally got the bugger on, with my thumbs!
#14
Quidam Bike Super Hero
Join Date: Jan 2019
Location: Stone Mountain, GA (Metro Atlanta, East)
Posts: 1,135
Bikes: 1995 Trek 800 Sport, aka, "CamelTrek"
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 331 Post(s)
Liked 415 Times
in
282 Posts
I have an old mtb, much easier tire repair than roadies, but when seeing a brand new pair of Pedros in a thrift store for $1.99....
#15
Senior Member
Join Date: Aug 2005
Location: Las Vegas, NV
Posts: 932
Bikes: '04 LeMond Buenos Aires, '82 Bianchi Nuova Racing, De Rosa SLX, Bridgestone MB-1, Guerciotti TSX, Torpado Aelle, LeMond Tourmalet 853, Bridgestone Radac
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 101 Post(s)
Liked 46 Times
in
36 Posts
I bought one a few years ago but have rarely used it, mostly because when I end up with tight tires I don't buy them again. It does work well for me.
#16
Senior Member
Join Date: Feb 2019
Location: Indiana
Posts: 592
Bikes: 1984 Fuji Club, Suntour ARX; 2013 Lynskey Peloton, mostly 105 with Ultegra rear derailleur, Enve 2.0 fork; 2020 Masi Giramondo 700c, full Deore with TRP dual piston mech disk brakes
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 324 Post(s)
Liked 81 Times
in
71 Posts
Back when I started, tire levers were chromed steel. Plastic wouldn't have been considered by anyone.
Fast forward 45 years, and you find that Pedro's levers are indeed the best lever made. No question.
I also have two of the Crank Brothers Speedier, a useful tool for quick re-seating of the second bead. And I have a KoolStop tire bead jack that I carry on my commuter because Schwalbe Marathon Plus tires are difficult to change/mount. Fortunately, flats are rare with those tires.
Fast forward 45 years, and you find that Pedro's levers are indeed the best lever made. No question.
I also have two of the Crank Brothers Speedier, a useful tool for quick re-seating of the second bead. And I have a KoolStop tire bead jack that I carry on my commuter because Schwalbe Marathon Plus tires are difficult to change/mount. Fortunately, flats are rare with those tires.
Tire lever wise I have a 1/2 set of Pedros, one broke due to being used in cold weather, a problem with plastic. I use Soma steel core levers, they're not quite as bulky as the Pedros but far stronger, they can't crack in the cold because they can't flex. Another tire lever I use is the VAR, extremely good at putting on very tough tires, and it can fit in a standard seat bag.
#17
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,004
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times
in
806 Posts
So you started road biking 43 years ago? so that was in 1975, correct? I started myself in 1976, in 1976 I bought my first road bike, a Trek TX900, and with that Trek I bought my first flat repair kit with tire irons...mine was made of aluminum. Aluminum tire levers came out because of aluminum rims, and the steel would damage the rims. Aluminum rims go back to 1937, but I can't find when aluminum tire levers first come came out, but they've had to be out for a long time due to aluminum rims. There were chrome steel levers as you mentioned but those were used on chrome steel rims, so were you riding on steel chrome wheels back in the mid 70's?
#18
WALSTIB
Schwalbe tires can only be removed with Schwalbe tire levers dummkopf
#19
Senior Member
Join Date: Jul 2017
Location: Walnut Creek, CA
Posts: 756
Bikes: 1969 Peugeot PX10, 1992 Della Santa, Linus Roadster 8, Biria 700C ST-8
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 791 Post(s)
Liked 504 Times
in
320 Posts
If you want to read about how Schwalbe feels about some rims and tires being harder to mount and how you can deal with it then read here:https://www.schwalbe.com/en/tech
It’s an amazingly detailed document covering the company and it’s products Did you know they make a fluid called “Easy Fit” that can help ? Also they talk about tried and true techniques like holding down a section of the tire with a toe strap or zip tie while working on it Highly recommended.
BTW, that little brochure that we all throw away when unwrapping a tire was where I got that link. Enjoy.
It’s an amazingly detailed document covering the company and it’s products Did you know they make a fluid called “Easy Fit” that can help ? Also they talk about tried and true techniques like holding down a section of the tire with a toe strap or zip tie while working on it Highly recommended.
BTW, that little brochure that we all throw away when unwrapping a tire was where I got that link. Enjoy.
Last edited by Joe Bikerider; 08-02-20 at 09:26 PM.
#20
Senior Member
Join Date: Aug 2018
Location: Allen, TX
Posts: 2,633
Bikes: 2021 S-Works Turbo Creo SL, 2020 Specialized Roubaix Expert
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 762 Post(s)
Liked 4,029 Times
in
1,427 Posts
If you want to read about how Schwalbe feels about some rims and tires being harder to mount and how you can deal with it then read here:https://www.schwalbe.com/en/tech
It’s an amazingly detailed document covering the company and it’s products Did you know they make a fluid called “Easy Fit” that can help ? Also they talk about tried and true techniques like holding down a section of the tire with a toe strap or zip tie while working on it Highly recommended.
BTW, that little brochure that we all throw away when unwrapping a tire was where I got that link. Enjoy.
It’s an amazingly detailed document covering the company and it’s products Did you know they make a fluid called “Easy Fit” that can help ? Also they talk about tried and true techniques like holding down a section of the tire with a toe strap or zip tie while working on it Highly recommended.
BTW, that little brochure that we all throw away when unwrapping a tire was where I got that link. Enjoy.
#21
Senior Member
Join Date: Jan 2010
Posts: 39,214
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18397 Post(s)
Liked 15,492 Times
in
7,316 Posts
#22
Senior Member
Join Date: Jan 2010
Posts: 39,214
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18397 Post(s)
Liked 15,492 Times
in
7,316 Posts