Raleigh Technium Olympian
#1
Senior Member
Thread Starter
Join Date: Aug 2018
Location: north NJ
Posts: 687
Bikes: Miyata 710, Univega Viva Sport, Centurion LeMans, Peugeot U09
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 212 Post(s)
Liked 111 Times
in
80 Posts
Raleigh Technium Olympian
Sorry for the poor pics, but anyone have a clue what year this is? I'm debating if its worth fixing up and selling as a bike or just grabbing a few parts and ditching the rest. The frame is in good shape. I would have very little $ into it as a purchase. No cracks, dents or rust. Needs lots of little things like bar tape, cables and tires.
#2
Senior Member
Techniums (Technii?) were made in Kent, Washington, just south of the Boeing plant in Seattle, between 1986 and 1993 if memory serves. Raleigh needed Boeing's expertise in bonding dissimilar metals - which is what the Technium process is.
In your case, I believe the Olympian frame consists of aluminum main tubes bonded to cromoly lugs, the most common configuation.
I like these frames. I've always thought they rode better than their pay grade, almost like a better grade of steel. Not soft, but definitely not harsh either, a nice balance. And no, I've never seen a frame come apart, if you have fears of the bonding process.
When times were good, ~$150, fully refurb'd & ready to go. Today, no clue what these bring.
In your case, I believe the Olympian frame consists of aluminum main tubes bonded to cromoly lugs, the most common configuation.
I like these frames. I've always thought they rode better than their pay grade, almost like a better grade of steel. Not soft, but definitely not harsh either, a nice balance. And no, I've never seen a frame come apart, if you have fears of the bonding process.
When times were good, ~$150, fully refurb'd & ready to go. Today, no clue what these bring.
#3
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,858
Bikes: Too many to list here check my signature.
Mentioned: 192 Post(s)
Tagged: 2 Thread(s)
Quoted: 2930 Post(s)
Liked 2,923 Times
in
1,491 Posts
With a good overhaul and some TLC that will make someone a great commuter
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
#5
Senior Member
Thread Starter
Join Date: Aug 2018
Location: north NJ
Posts: 687
Bikes: Miyata 710, Univega Viva Sport, Centurion LeMans, Peugeot U09
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 212 Post(s)
Liked 111 Times
in
80 Posts
Thanks to all!
Yes, the components are decent but nothing great. I do hate to see a bike parted out, especially when the frame is still good and the components have no extraordinary value. I think I will get it in good, rideable condition, and let someone else enjoy it.A nice home project while I am waiting out the storm.
Yes, the components are decent but nothing great. I do hate to see a bike parted out, especially when the frame is still good and the components have no extraordinary value. I think I will get it in good, rideable condition, and let someone else enjoy it.A nice home project while I am waiting out the storm.
Likes For kross57:
#6
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,036 Times
in
1,874 Posts
The subject bicycle is 1990 Raleigh Olympian FT. It was 7th in a line-up of 9 Technium road models and had a retail price of $400 US. Olympian was actually a series of 3 sport bicycles during this era, with the other two being Olympian and Olympian CX.
#8
Senior Member
Front tire too close to down tube and, the front fork looks like toast in the next to last picture. Looks like an early 3X7 set up. Exage is decent stuff. Main frame triangle looks OK. Might be good for a parts bike. Worth $50 tops as-is.
#9
Senior Member
Join Date: Jan 2013
Location: Norman, Oklahoma
Posts: 5,395
Bikes: Too many to list
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 1765 Post(s)
Liked 1,124 Times
in
746 Posts
MAn -
if it weren't for that fork being punched with a hammer , that bike would have potential !
everyone is gaga over bigger tires , and with cantilever brakes, you might be able to squeeze a decent size set of skins on there for some entry level gravel exploring on the cheap
if it weren't for that fork being punched with a hammer , that bike would have potential !
everyone is gaga over bigger tires , and with cantilever brakes, you might be able to squeeze a decent size set of skins on there for some entry level gravel exploring on the cheap
#10
Senior Member
Thread Starter
Join Date: Aug 2018
Location: north NJ
Posts: 687
Bikes: Miyata 710, Univega Viva Sport, Centurion LeMans, Peugeot U09
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 212 Post(s)
Liked 111 Times
in
80 Posts
The fork is actually perfect. I'm not sure why that image shows a distortion.
#11
Senior Member
Thread Starter
Join Date: Aug 2018
Location: north NJ
Posts: 687
Bikes: Miyata 710, Univega Viva Sport, Centurion LeMans, Peugeot U09
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 212 Post(s)
Liked 111 Times
in
80 Posts
MAn -
if it weren't for that fork being punched with a hammer , that bike would have potential !
everyone is gaga over bigger tires , and with cantilever brakes, you might be able to squeeze a decent size set of skins on there for some entry level gravel exploring on the cheap
if it weren't for that fork being punched with a hammer , that bike would have potential !
everyone is gaga over bigger tires , and with cantilever brakes, you might be able to squeeze a decent size set of skins on there for some entry level gravel exploring on the cheap
#12
Senior Member
Join Date: Jan 2013
Location: Norman, Oklahoma
Posts: 5,395
Bikes: Too many to list
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 1765 Post(s)
Liked 1,124 Times
in
746 Posts
Id be all over that then -- but ive been looking for a deal on a canti braked touring bike for a while now ---- ive been pining for a Bianchi Volpe, but they never come up in my area in my size
#16
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,036 Times
in
1,874 Posts
No, it's a 1990 model, as I previously stated. Based on the serial number, this frame was the 1?98th manufactured on day 140 of 1990. That would make it May 19, 1990. The format used by Raleigh's Kent facility used the 1st and 5th characters as the year indicator. Characters 2 through 4 indicate the day, while the remaining characters are the sequential frame number. Sometimes, there is also an A or B suffix to denote day and evening shifts respectively.
Likes For T-Mar:
#17
Senior Member
Thread Starter
Join Date: Aug 2018
Location: north NJ
Posts: 687
Bikes: Miyata 710, Univega Viva Sport, Centurion LeMans, Peugeot U09
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 212 Post(s)
Liked 111 Times
in
80 Posts
No, it's a 1990 model, as I previously stated. Based on the serial number, this frame was the 1?98th manufactured on day 140 of 1990. That would make it May 19, 1990. The format used by Raleigh's Kent facility used the 1st and 5th characters as the year indicator. Characters 2 through 4 indicate the day, while the remaining characters are the sequential frame number. Sometimes, there is also an A or B suffix to denote day and evening shifts respectively.
#18
Thrifty Bill
Join Date: Jan 2008
Location: Mountains of Western NC
Posts: 23,524
Bikes: 86 Katakura Silk, 87 Prologue X2, 88 Cimarron LE, 1975 Sekai 4000 Professional, 73 Paramount, plus more
Mentioned: 96 Post(s)
Tagged: 0 Thread(s)
Quoted: 1236 Post(s)
Liked 964 Times
in
628 Posts
Part out candidates, list is not complete. There are always exceptions:
Road bikes:
Campy
Shimano Dura Ace, Ultegra or 600
Suntour Cyclone, Sprint, Superbe, Superbe Pro
Any good quality triple crankset
Some Sugino doubles
MTBs:
Shimano XT or XTR, Shimano Deerhead
Suntour XC Pro
Thumb shifters
Any good quality triple crankset
Now on really desirable bikes, best to leave original and unmolested!!
+100 The "best" part outs is when the frame has a fatal flaw, like crash damage or similar.
Likes For wrk101:
#19
Senior Member
Thread Starter
Join Date: Aug 2018
Location: north NJ
Posts: 687
Bikes: Miyata 710, Univega Viva Sport, Centurion LeMans, Peugeot U09
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 212 Post(s)
Liked 111 Times
in
80 Posts
Waded into it today - bottom bracket and wheel bearings serviced, derailleurs repaired, cables replaced. Waiting on the tires. Then rewrap the bars, replace the saddle, clean her up and done!
#20
Senior Member
Not trying to hijack the thread. But, I've got an old Technium myself. I believe it's the first year model. I've been using it for about 6 years myself, no problemo. Techniums came equipped with nice Araya wheels. My frame can handle big 27" x 1-3/8" (35mm) Michelin Pro-Tek tires. I think the Technium is one of my sweetest rides. (All my bikes are for sale but, I think I'll keep this one).
Likes For ramzilla:
#21
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,036 Times
in
1,874 Posts
#22
Senior Member
Join Date: Nov 2010
Posts: 3,504
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 586 Post(s)
Liked 612 Times
in
447 Posts
Not trying to hijack the thread. But, I've got an old Technium myself. I believe it's the first year model. I've been using it for about 6 years myself, no problemo. Techniums came equipped with nice Araya wheels. My frame can handle big 27" x 1-3/8" (35mm) Michelin Pro-Tek tires. I think the Technium is one of my sweetest rides. (All my bikes are for sale but, I think I'll keep this one).
#23
Senior Member
#25
Senior Member
Thread Starter
Join Date: Aug 2018
Location: north NJ
Posts: 687
Bikes: Miyata 710, Univega Viva Sport, Centurion LeMans, Peugeot U09
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 212 Post(s)
Liked 111 Times
in
80 Posts
Just a follow up. Despite the lower estimates here, once serviced and clean, it sold for $175 the first day Ilisted it. There was a lot of interest,so, it probably could have sold higher. Good to know. If you are selling a similar bike I would offer it at $200-$250.
Likes For kross57: