Go Back  Bike Forums > Bike Forums > General Cycling Discussion
Reload this Page >

Corroded aluminum bars, still safe?

Notices
General Cycling Discussion Have a cycling related question or comment that doesn't fit in one of the other specialty forums? Drop on in and post in here! When possible, please select the forum above that most fits your post!

Corroded aluminum bars, still safe?

Old 07-25-19, 10:27 AM
  #1  
BLD25
Senior Member
Thread Starter
 
Join Date: Jun 2010
Posts: 67
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Corroded aluminum bars, still safe?

Hello, I took my tape off and found some corrosion on my aluminum bars. I cleaned them and sanded them a bit and then sprayed some clear on them. I know a little corrosion can be okay, but just getting opinions. Will corrosion stop now that it is clear coated?
BLD25 is offline  
Old 07-25-19, 01:47 PM
  #2  
General Geoff
Senior Member
 
Join Date: Apr 2007
Location: Allentown, Pennsylvania
Posts: 665

Bikes: 2018 Lynskey Cooper CX; 2007 Cannondale F4

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 302 Post(s)
Liked 25 Times in 11 Posts
Aluminum corrodes instantly upon contact with air. It forms a thin layer of aluminum oxide which protects the metal underneath from further corrosion. Clearcoat will have little effect on this process.
General Geoff is online now  
Old 07-25-19, 02:21 PM
  #3  
terrymorse 
climber has-been
 
terrymorse's Avatar
 
Join Date: Dec 2004
Location: Palo Alto, CA
Posts: 3,388

Bikes: Scott Addict R1

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 222 Post(s)
Liked 120 Times in 88 Posts
It looks like you wore away the anodized layer with your hands, then salt from your sweat corroded the bare metal.

If your clear coat is intact and prevents salt from contacting the bare metal, it should not corrode further.

But since the anodize layer was already rubbed off, the much softer clear coat probably will suffer the same fate, and the corrosion will continue.
__________________
Ride, Rest, Repeat
terrymorse is online now  
Old 07-26-19, 07:18 PM
  #4  
MikeyMK
Cycleway town
 
MikeyMK's Avatar
 
Join Date: Jul 2014
Location: Milton Keynes, England
Posts: 1,220

Bikes: 2.6kw GT LTS e-tandem, 250w Voodoo, 250w solar recumbent trike, 3-speed shopper, Merlin ol/skl mtb, 80cc Ellswick

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 467 Post(s)
Liked 97 Times in 73 Posts
Aluminium handlebars should be considered a wear part. They suffer fatigue and can fracture at the stem clamp.

If a handlebar has so much history that it's worn and subsequently corroding like that, then it's a wise idea to replace it as a matter of due course.
MikeyMK is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.