The Horror: Junk Build, High-End-Hatchet job, Frankenbike Challenge Extravaganza
#76
Señor Member
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,926
Bikes: Mostly English - predominantly Raleighs
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 1492 Post(s)
Liked 1,096 Times
in
642 Posts
I'm having early visions of a top tube inspired by the South African flag.
__________________
In search of what to search for.
In search of what to search for.
Likes For USAZorro:
#77
Freewheel Medic
Join Date: Oct 2005
Location: An Island on the Coast of GA!
Posts: 12,885
Bikes: Snazzy* Schwinns, Classy Cannondales & a Super Pro Aero Lotus (* Ed.)
Mentioned: 140 Post(s)
Tagged: 0 Thread(s)
Quoted: 1453 Post(s)
Liked 2,196 Times
in
963 Posts
I've been pondering names for my Kline. Swine-Kline? Any other suggestions ?
__________________
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
#78
Edumacator
Thread Starter
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,821
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2441 Post(s)
Liked 3,136 Times
in
1,975 Posts
And horror has many faces: mashup of parts, Campy + Shimano, rust, oxidizing, bad paint, chunky components, sloping top tubes, dare I say (gasp) unicrowns!
Oooh! I just had an epiphany! Time to search the garage to see if I have a unicrown fork for the Paramount. Better if it is even longer than necessary, so it would then slope the top tube
If anyone needs some assistance with their build, let this thread read more like an instruction manual for you: C&V Pet Peeves
Oooh! I just had an epiphany! Time to search the garage to see if I have a unicrown fork for the Paramount. Better if it is even longer than necessary, so it would then slope the top tube
If anyone needs some assistance with their build, let this thread read more like an instruction manual for you: C&V Pet Peeves
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#79
Edumacator
Thread Starter
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,821
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2441 Post(s)
Liked 3,136 Times
in
1,975 Posts
Frankenklein.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
Likes For jdawginsc:
#80
small ring
Join Date: Jul 2012
Location: PNW
Posts: 1,025
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 438 Post(s)
Liked 925 Times
in
370 Posts
__________________
59 Allegro Special -- 72 Bob Jackson -- 74 Motobecane Grand Jubile -- 74 Sekine SHS 271 -- 80 Nishiki International
85 Shogun 800 -- 86 Tommasini Super Prestige -- 92 Specialized Rockhopper -- 17 Colnago Arabesque
59 Allegro Special -- 72 Bob Jackson -- 74 Motobecane Grand Jubile -- 74 Sekine SHS 271 -- 80 Nishiki International
85 Shogun 800 -- 86 Tommasini Super Prestige -- 92 Specialized Rockhopper -- 17 Colnago Arabesque
Likes For droppedandlost:
#81
The Huffmeister
Join Date: Jul 2008
Location: The Le Grande HQ
Posts: 2,741
Bikes: '79 Trek 938, '86 Jim Merz Allez SE, '90 Miyata 1000, '68 PX-10, '80 PXN-10, '73 Super Course, '87 Guerciotti, '83 Trek 600, '80 Huffy Le Grande
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 1227 Post(s)
Liked 3,561 Times
in
1,412 Posts
When less = more, go for 24"!
(although even I would be silly not to admit that there is a brutal beauty to that concoction you've got right there. The fact that the top tube is perfectly level with such horrendously mis-matched wheels is poetry)
(although even I would be silly not to admit that there is a brutal beauty to that concoction you've got right there. The fact that the top tube is perfectly level with such horrendously mis-matched wheels is poetry)
__________________
There were 135 Confentes, but only one...Huffente!
There were 135 Confentes, but only one...Huffente!
Likes For AdventureManCO:
#82
Señor Member
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,926
Bikes: Mostly English - predominantly Raleighs
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 1492 Post(s)
Liked 1,096 Times
in
642 Posts
I put about 15k miles on that cf frame before I realized how good steel is. All the parts went to my Tommasini and this one sat. During the forced covid break I decided to repaint it. Removing the paint revealed a very thin weak spot in the downtube that probably explains the flex I was feeling when riding. Decided to have some ugly fun with it before killing it. I will say that I think cf is pretty dang tough. After cutting halfway through the tubes, I had a hell of a time trying to bend/tear/break it apart.
Bummer. Can't even get wind chimes out of the remains.
__________________
In search of what to search for.
In search of what to search for.
#83
The Huffmeister
Join Date: Jul 2008
Location: The Le Grande HQ
Posts: 2,741
Bikes: '79 Trek 938, '86 Jim Merz Allez SE, '90 Miyata 1000, '68 PX-10, '80 PXN-10, '73 Super Course, '87 Guerciotti, '83 Trek 600, '80 Huffy Le Grande
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 1227 Post(s)
Liked 3,561 Times
in
1,412 Posts
Okay! droppedandlost ’s post inspired me to check out and see what I could make do for a fork for the Crapamount frame.
At first I tried a suspension fork, since the horror factor is just too good to pass up. Unfortunately (and we all know this already) the 1 1/8” fork steerer doesn’t play nicely with the 1” headtube. Still, lots of promise here for a 1” suspension fork, hopefully from something like a Magna. I’m not discounting this as a serious option!
Next, I have this garbage Azuki that I grabbed from the scrap pile at the co-op that I used for brazing practice. It has a decent donor fork - green paint, some corrosion! Would look terrible on the Paramount! But…it still is just a little to proper. Nice fork crown…it even has matching chrome socks! No no…such a thing will never do.
Next up…some random Tange fork from the 80s. Hmmm! Wrong decade, AND it’s Japanese! But wait…Schwinn had that whole Japanese connection and, quite honestly, it looks stunning on this bike!
WRONG!!! That will never work!
Lastly…I remembered that convo in the ‘pet peeves’ thread about unicrowns. I looked up in the rafters, and what do I find but my old unicrown fork from my ‘87 Ironman Expert! In Miami Vice pink nonetheless!
By george I think we’ve got ourselves a winner on our hands!
Welcome to the first 1972 Nervex-lugged unicrown’d Paramount. ‘You’ve just been unicrown’d!!’
Seeing such a ‘hideous monstrosity’ next to those lugs…brings a tear (of joy) to my eye.
The best part about this is that the Ironman, like the Paramount, is likewise another loved and revered bike amongst C&V riders, so there is a whole other level of wrong going on here, as if the owner/build of such a mongrel would sort of have to be a ‘bike guy’ to select this fork, which is the makes it almost too perfect for words. The levels of cognitive dissonance for those are otherworldly, which does nicely with our October Halloween-themed horror show.
The missing punchline?
I still have the original Paramount fork bahahahaha
At first I tried a suspension fork, since the horror factor is just too good to pass up. Unfortunately (and we all know this already) the 1 1/8” fork steerer doesn’t play nicely with the 1” headtube. Still, lots of promise here for a 1” suspension fork, hopefully from something like a Magna. I’m not discounting this as a serious option!
Next, I have this garbage Azuki that I grabbed from the scrap pile at the co-op that I used for brazing practice. It has a decent donor fork - green paint, some corrosion! Would look terrible on the Paramount! But…it still is just a little to proper. Nice fork crown…it even has matching chrome socks! No no…such a thing will never do.
Next up…some random Tange fork from the 80s. Hmmm! Wrong decade, AND it’s Japanese! But wait…Schwinn had that whole Japanese connection and, quite honestly, it looks stunning on this bike!
WRONG!!! That will never work!
Lastly…I remembered that convo in the ‘pet peeves’ thread about unicrowns. I looked up in the rafters, and what do I find but my old unicrown fork from my ‘87 Ironman Expert! In Miami Vice pink nonetheless!
By george I think we’ve got ourselves a winner on our hands!
Welcome to the first 1972 Nervex-lugged unicrown’d Paramount. ‘You’ve just been unicrown’d!!’
Seeing such a ‘hideous monstrosity’ next to those lugs…brings a tear (of joy) to my eye.
The best part about this is that the Ironman, like the Paramount, is likewise another loved and revered bike amongst C&V riders, so there is a whole other level of wrong going on here, as if the owner/build of such a mongrel would sort of have to be a ‘bike guy’ to select this fork, which is the makes it almost too perfect for words. The levels of cognitive dissonance for those are otherworldly, which does nicely with our October Halloween-themed horror show.
The missing punchline?
I still have the original Paramount fork bahahahaha
Likes For AdventureManCO:
#84
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,951
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 117 Post(s)
Tagged: 0 Thread(s)
Quoted: 1303 Post(s)
Liked 1,912 Times
in
1,142 Posts
I have decided on a build idea. For Ben and those who think my idea of lower end parts is very old Campy installed this will be a bit of a change. I will put some eclectic items on the Ochsner that were not exactly destined for the frame as it was designed by the Ochsner family. Anyone who knew Othon II knew he was the biggest importer of Campy parts to the US, so he wanted those parts for his frames. I shall commit the blasphemy of defiling the Ochsner frame with non-Campy parts. And now the fun begins... Smiles, MH
Likes For Mad Honk:
#85
Edumacator
Thread Starter
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,821
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2441 Post(s)
Liked 3,136 Times
in
1,975 Posts
Udder perfection
For those having a cow, the purple fork brings tears to me eyes...might improve the handling. Might want to check the trail. Moo-vin‘ on up!
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
Likes For jdawginsc:
#86
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,951
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 117 Post(s)
Tagged: 0 Thread(s)
Quoted: 1303 Post(s)
Liked 1,912 Times
in
1,142 Posts
Jdawg,
There is an ice cream shop in Cloverdale, IN called the purple cow. Perhaps that is what you had in mind after seeing the purple fork. Smiles, Dave #3
There is an ice cream shop in Cloverdale, IN called the purple cow. Perhaps that is what you had in mind after seeing the purple fork. Smiles, Dave #3
#87
Senior Member
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,880
Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1858 Post(s)
Liked 664 Times
in
506 Posts
Not just "what's the story," but what's next? I can see cadging the parts from a Roubaix, because that is a pretty nice set of parts, even with the lack of Campy. Is there actually a way to rejoin those carefully separated segments to make something with additional functionality? longer stays? lower trail? luggage racks? Are a Roubaix Rando or a Roubaix Rinko possible?
And why dismember a poor, wayward, starving athlete in the first place, who just wandered into a barn to nap during a long day ride? Plus, what's the utility? We know carbon fiber layups can depend on the integrity of the embedded fibers to maintain functional structure over time and usage, but to strip the finish, loads of fibers must have been compromised. And they're not even heavy enough to make decent paperweights!
And why dismember a poor, wayward, starving athlete in the first place, who just wandered into a barn to nap during a long day ride? Plus, what's the utility? We know carbon fiber layups can depend on the integrity of the embedded fibers to maintain functional structure over time and usage, but to strip the finish, loads of fibers must have been compromised. And they're not even heavy enough to make decent paperweights!
#88
Senior Member
Join Date: Oct 2012
Posts: 1,610
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 399 Post(s)
Liked 274 Times
in
136 Posts
I never thought I'd get to post this bike in this build in this group - but I'm not going to pass up the opportunity so I am claiming that my mostly regular rider, which I do love dearly, kinda does fit the theme we got going here. Thanks...
#89
Edumacator
Thread Starter
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,821
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2441 Post(s)
Liked 3,136 Times
in
1,975 Posts
Thats no hatchet job! That’s gorgeous!
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#91
Senior Member
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,880
Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1858 Post(s)
Liked 664 Times
in
506 Posts
Thanks! It does ride great but I figured it might qualify because it is a “horror show” based on what many c&v members get worked up about sometimes….
1. Aluminum frame: Not steel, not real and no lugs.
2 126mm spacing with a 130 hub. No ability to coldest or use twine to align. Should asplode any minute now…..
3. Parts parts from 4 different decades.
4. No Campagnolo.
5. Drops angled slightly upward
6. Index shifting AND brifters
7. No toe clips or straps, no clip-less and no bmx style platform pedal.
9. Rubberized was bar tape
10. Not a “gruppo” in sight!
Scary stuff!!!!!
1. Aluminum frame: Not steel, not real and no lugs.
2 126mm spacing with a 130 hub. No ability to coldest or use twine to align. Should asplode any minute now…..
3. Parts parts from 4 different decades.
4. No Campagnolo.
5. Drops angled slightly upward
6. Index shifting AND brifters
7. No toe clips or straps, no clip-less and no bmx style platform pedal.
9. Rubberized was bar tape
10. Not a “gruppo” in sight!
Scary stuff!!!!!
#92
Senior Member
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,880
Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1858 Post(s)
Liked 664 Times
in
506 Posts
Ok, beautiful! What is that frame? is it originally a pista?
#94
Freewheel Medic
Join Date: Oct 2005
Location: An Island on the Coast of GA!
Posts: 12,885
Bikes: Snazzy* Schwinns, Classy Cannondales & a Super Pro Aero Lotus (* Ed.)
Mentioned: 140 Post(s)
Tagged: 0 Thread(s)
Quoted: 1453 Post(s)
Liked 2,196 Times
in
963 Posts
AdventureManCO I had planned to offer my FrankenKline fork for your Crapamount since it is a 1" model. But it does look as if you have this component covered.
__________________
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
#95
Senior Member
Join Date: Jan 2006
Location: Berwyn PA
Posts: 6,408
Bikes: I hate bikes!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 431 Post(s)
Liked 710 Times
in
233 Posts
Why is there no ability to use twine to check the alignment? There's no big efforts of muscular heave and coordination, in which your frame supports may asplode. It's just tying a piece of string to one dropout, looping it up around the head tube and back to the other dropout, and tying it about as tight as a shoelace. Then you look at each string and its gap to the seat tube, and see how closely they match.
#96
Senior Member
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,880
Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1858 Post(s)
Liked 664 Times
in
506 Posts
Sorry, wasn't aware it's an Al frame.
#97
small ring
Join Date: Jul 2012
Location: PNW
Posts: 1,025
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 438 Post(s)
Liked 925 Times
in
370 Posts
how about a Colnago Precisa fork on a rockhopper
that's gotta make somebody's eye twitch
that's gotta make somebody's eye twitch
__________________
59 Allegro Special -- 72 Bob Jackson -- 74 Motobecane Grand Jubile -- 74 Sekine SHS 271 -- 80 Nishiki International
85 Shogun 800 -- 86 Tommasini Super Prestige -- 92 Specialized Rockhopper -- 17 Colnago Arabesque
59 Allegro Special -- 72 Bob Jackson -- 74 Motobecane Grand Jubile -- 74 Sekine SHS 271 -- 80 Nishiki International
85 Shogun 800 -- 86 Tommasini Super Prestige -- 92 Specialized Rockhopper -- 17 Colnago Arabesque
Likes For droppedandlost:
#98
Edumacator
Thread Starter
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,821
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2441 Post(s)
Liked 3,136 Times
in
1,975 Posts
Likes For jdawginsc:
#99
Senior Member
Join Date: Oct 2011
Location: Fairplay Co
Posts: 9,530
Bikes: Current 79 Nishiki Custum Sport, Jeunet 620, notable previous bikes P.K. Ripper loop tail, Kawahara Laser Lite, Paramount Track full chrome, Raliegh Internatioanl, Motobecan Super Mirage. 59 Crown royak 3 speed
Mentioned: 26 Post(s)
Tagged: 1 Thread(s)
Quoted: 792 Post(s)
Liked 1,783 Times
in
638 Posts
Got the old Jeunet working good brakes and all just seems to nice looking for a Framkenbike so I'm thinking of adding a bit of low key horror to it by taking the nice wide range vintage correct double crank and VGT which work great off the bike. Then putting an extreme ergo egg shaped rings ugly Suntour Edge triple crank with a cheapo modern mega range DR can't decide which is more horrific the the Allivo mega cog or the Sram X-4. I figure I can always change stuff back and some rattle can green or orange paint would be a nice touch on these parts.
#100
The Huffmeister
Join Date: Jul 2008
Location: The Le Grande HQ
Posts: 2,741
Bikes: '79 Trek 938, '86 Jim Merz Allez SE, '90 Miyata 1000, '68 PX-10, '80 PXN-10, '73 Super Course, '87 Guerciotti, '83 Trek 600, '80 Huffy Le Grande
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 1227 Post(s)
Liked 3,561 Times
in
1,412 Posts
AdventureManCO I had planned to offer my FrankenKline fork for your Crapamount since it is a 1" model. But it does look as if you have this component covered.
And you could put the Paramount fork on the Klein? We might have the makings of something beautiful x2.
__________________
There were 135 Confentes, but only one...Huffente!
There were 135 Confentes, but only one...Huffente!
Likes For AdventureManCO: