Does a journey of a thousand miles begin with a single wrench?
#1
Senior Member
Thread Starter
Join Date: Aug 2011
Location: Pittsburgh, PA USA
Posts: 169
Bikes: 2012 Jamis Xenith Race, 2009 Jamis Aurora, 1993 Bianchi Ibex, 1964 Schwinn Traveler 3-Speed
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Does a journey of a thousand miles begin with a single wrench?
Could've posted this to mechanics, but it's not a question.
I have been awed and humbled by the apparent ease with which so many posters maintain their bikes. The talk of swapping out forks, stems and headsets, converting to single speed and back, repacking bearings, replacing the cranks, the cassettes, the bottom brackets, putting in new cables, installing hydraulic disc brakes, and it all sounds as easy as making toast. I wonder if I'll ever true a wheel or successfully adjust my derailleur.
So today, after an hour and a half, with grease under my fingernails and on my pants, I am inordinately proud to say that I have replaced the brake pads on my bike. The bike stops. The tension in the levers is right. They do not squeal. Last week, I switched my tires from plain knobby tires to studded ones for winter. I didn't make the tires, mind you. I just swapped 'em and put 'em on.
I know it's not much. I know it would have taken a real mechanic 10 minutes, at most. I gotta say, though--right here, right now, it feels like a win.
I have been awed and humbled by the apparent ease with which so many posters maintain their bikes. The talk of swapping out forks, stems and headsets, converting to single speed and back, repacking bearings, replacing the cranks, the cassettes, the bottom brackets, putting in new cables, installing hydraulic disc brakes, and it all sounds as easy as making toast. I wonder if I'll ever true a wheel or successfully adjust my derailleur.
So today, after an hour and a half, with grease under my fingernails and on my pants, I am inordinately proud to say that I have replaced the brake pads on my bike. The bike stops. The tension in the levers is right. They do not squeal. Last week, I switched my tires from plain knobby tires to studded ones for winter. I didn't make the tires, mind you. I just swapped 'em and put 'em on.
I know it's not much. I know it would have taken a real mechanic 10 minutes, at most. I gotta say, though--right here, right now, it feels like a win.
#2
Senior Member
LMFAO. I totally understand. I am new to all this and this past summer was the first time I so much as changed a punctured bike tube. But by the end of the summer, with a little help from youtube(Im lying youtube is my hero) I replaced my brake pads, and removed and replaced my bike chain. Again like you said its not much but it gave me a little confidence that this comming summer I may order some tools and attempt some more difficult repairs on my soon to be old bike, knowing that if i mess it up I can still ride my new(still unpurchased) bike. one such planned endevour would be to replace my chain ring(just learned what that part was actually called today) for one with more teeth.
#3
Bicycle Repair Man !!!
When I was but a wee lad and got my first bicycle my father handed me a wrench and showed me how to remove my wheel so we could mend a flat tyre which was a fairly common occurrence in those days and he felt that if I was going to ride it, I needed to know how to fix it.
Pretty soon I was fixing everyone's flat tyres and he also showed me how to make sure the chain was lubed and how to tell if anything was amiss so that it could be addressed right away.
My first bicycle had a Sturmey Archer three speed and I had to learn how to make sure the shifter was set up as my father worked on the road and was not always there to lend a hand.
I fell in love with bicycles when I was very young, they have always fascinated and intrigued me, and after many years of turning wrenches on pretty much everything and building wheels I turned my attention to learning how to build frames and forks which was an entirely new journey.
We learn with every step we take and the longer you walk the easier it gets and what seemed like a major accomplishment today will seem funny a few months from now.
I like teaching and seeing how happy people are when they learn how to do something they considered impossible or beyond their abilities and it was not so long ago that I handed my daughter a wrench so she could learn how to change a flat tyre.
Funny as she was lacing wheels when she was 8 and has been maintaining her own bike for 4 years but with better technology those flats are few and far between... and her bike is also a three speed so she is learning how to make sure it is properly set up.
She has built a few bikes with me and has some amazing skills but then she likes to hang out with me and watch everything I do in the shop and is a very quick learner.
Pretty soon I was fixing everyone's flat tyres and he also showed me how to make sure the chain was lubed and how to tell if anything was amiss so that it could be addressed right away.
My first bicycle had a Sturmey Archer three speed and I had to learn how to make sure the shifter was set up as my father worked on the road and was not always there to lend a hand.
I fell in love with bicycles when I was very young, they have always fascinated and intrigued me, and after many years of turning wrenches on pretty much everything and building wheels I turned my attention to learning how to build frames and forks which was an entirely new journey.
We learn with every step we take and the longer you walk the easier it gets and what seemed like a major accomplishment today will seem funny a few months from now.
I like teaching and seeing how happy people are when they learn how to do something they considered impossible or beyond their abilities and it was not so long ago that I handed my daughter a wrench so she could learn how to change a flat tyre.
Funny as she was lacing wheels when she was 8 and has been maintaining her own bike for 4 years but with better technology those flats are few and far between... and her bike is also a three speed so she is learning how to make sure it is properly set up.
She has built a few bikes with me and has some amazing skills but then she likes to hang out with me and watch everything I do in the shop and is a very quick learner.
#4
Senior Member
Thread Starter
Join Date: Aug 2011
Location: Pittsburgh, PA USA
Posts: 169
Bikes: 2012 Jamis Xenith Race, 2009 Jamis Aurora, 1993 Bianchi Ibex, 1964 Schwinn Traveler 3-Speed
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
LMFAO. I totally understand. I am new to all this and this past summer was the first time I so much as changed a punctured bike tube. But by the end of the summer, with a little help from youtube(Im lying youtube is my hero) I replaced my brake pads, and removed and replaced my bike chain. Again like you said its not much but it gave me a little confidence that this comming summer I may order some tools and attempt some more difficult repairs on my soon to be old bike, knowing that if i mess it up I can still ride my new(still unpurchased) bike. one such planned endevour would be to replace my chain ring(just learned what that part was actually called today) for one with more teeth.
I think, before I get much more ambitious, a repair stand, either bought or somehow improvised, might be a good purchase.
We should both keep tinkering. It's the only way to get better. As Star Trek's Mr. Spock (and countless others) have said, "We learn by doing."
#5
Senior Member
Join Date: Apr 2011
Location: Arizona
Posts: 438
Bikes: Raleigh Venture 3.0
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Just don't mess with the spokes unless you REALLY know what you are doing...
PINGGGGG...wobble wobble...
PINGGGGG...wobble wobble...
#6
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,368
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6221 Post(s)
Liked 4,221 Times
in
2,367 Posts
ultimattfrisbee, we all started somewhere. You'll make mistakes. You will break stuff. Eventually you get to the point where, to quote a Viagra ad, "you've reached an age of knowing how to get things done". It's only easy for some of us because we've seen it all.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#7
Senior Member
Join Date: Apr 2011
Location: Arizona
Posts: 438
Bikes: Raleigh Venture 3.0
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I just wish I hadn't had the "learning experience" out in the middle of nowhere, on a Sunday.
I would have preferred three blocks from home.
I would have preferred three blocks from home.
#8
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
Not messing with spokes until you know what you're doing is like wanting to get into better shape before starting to exercise.
#9
Senior Member
Thread Starter
Join Date: Aug 2011
Location: Pittsburgh, PA USA
Posts: 169
Bikes: 2012 Jamis Xenith Race, 2009 Jamis Aurora, 1993 Bianchi Ibex, 1964 Schwinn Traveler 3-Speed
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Fortunately, I have some people around who are good teachers. I think once the weather clears a bit, I'll feel more inclined to mess with my commuter. When it's nice out, I prefer the touring bike, anyway, so a mistake that puts it out of action for a day or two is no tragedy.
Thanks, all, for the encouragement. The guys I've met on bikeforums are (mostly) an inspiration!
Thanks, all, for the encouragement. The guys I've met on bikeforums are (mostly) an inspiration!
#10
Banned
Join Date: Jun 2009
Posts: 4,788
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I guess I had a double advantage when I was in that learning phase; I was being OJT'd by a real mechanic, and all my mistakes were on crap bikes for Walfart.
It took probably a month of trial/error to get 'competent' with wheel truing, but about 9 months to get what I considered 'good'.
Now, after 11 years, I'm a shade better than that mechanic (I was approached by a race team for a wrench's job with them, picked over him!), and can do most of this stuff in my sleep.
But then, I'm obsessed.....
It took probably a month of trial/error to get 'competent' with wheel truing, but about 9 months to get what I considered 'good'.
Now, after 11 years, I'm a shade better than that mechanic (I was approached by a race team for a wrench's job with them, picked over him!), and can do most of this stuff in my sleep.
But then, I'm obsessed.....
#11
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,368
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6221 Post(s)
Liked 4,221 Times
in
2,367 Posts
The ones in the middle of nowhere make more of an impression than the ones 3 blocks from home.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#12
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
Yup, part of the learning experience is judgeing the right time and place. I've made some bad calls in that regard but I'm typing this from home so I've obviously always found a way to get back.
#13
Senior Member
Join Date: Feb 2010
Posts: 230
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Who cares if it took 90 minutes to get the brakes done right. Now you know how to do it and it will be faster next time. Plus, you saved a few bucks! good job.
Keep it up. When I learned to true, it took me 2 1/2 hours to get that rim straight. Now I can true in less than 10, sometimes.
Practice and dont get frustrated/discouraged.
Keep it up. When I learned to true, it took me 2 1/2 hours to get that rim straight. Now I can true in less than 10, sometimes.
Practice and dont get frustrated/discouraged.
#14
Senior Member
After hearing from some of you more experienced bike mechanics I find myself wondering about tools. How about recommending some good tool sets and bike repair equipment. I'd like to know what items are a must have and what your average rider can do without - things that are better left to professionals. For example I can change the brakes on my car and do most intermediate maintainance but wouldn't want to be swapping out a transmition or something.
#15
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
After hearing from some of you more experienced bike mechanics I find myself wondering about tools. How about recommending some good tool sets and bike repair equipment. I'd like to know what items are a must have and what your average rider can do without - things that are better left to professionals. For example I can change the brakes on my car and do most intermediate maintainance but wouldn't want to be swapping out a transmition or something.
To me, one of the attractions of messing with bicycles is that my screw ups have always been relatively cheap to correct. I also justify that cost as tuition in the school of bicycle maintenance and mechanics.
I'm an advocate of buying tools as you need them. A good percentage of bicycle maintenance can be done with just a 5mm allen wrench. A GOOD cable cutter would also be an early purchase. The other specialty tools tend to only be needed as projects arise. Buy a cassette lockring tool and chain whip when you decide to change cassettes. Buy a chain breaker when you replace the chain. Spoke wrench and cone wrenches when you decide to tackle wheel work.
Thread
Thread Starter
Forum
Replies
Last Post
deacon mark
Road Cycling
110
03-04-15 09:54 AM
Bakerb24
Bicycle Mechanics
41
12-24-13 10:53 PM