Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

What unlikely tools or products do you keep in your bike repair/restoration toolbox?

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

What unlikely tools or products do you keep in your bike repair/restoration toolbox?

Old 02-05-21, 04:07 PM
  #1  
southpawboston
Senior Member
Thread Starter
 
southpawboston's Avatar
 
Join Date: Aug 2008
Location: Somerville, MA and Catskill Mtns
Posts: 4,150
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 78 Post(s)
Liked 182 Times in 89 Posts
What unlikely tools or products do you keep in your bike repair/restoration toolbox?

We all use things off-label when we discover they work really well for an unintended use. What do you all keep in your bike repair toolkit that wasn't intended for the way you use it?

I'll give an example:

Nail polish - I keep clear UV-resistant nail polish base coat as an all-purpose sealant for protecting decals and for coating rusty hardware after oxalic acid treatment and cleanup. It does a great job at preventing rust from re-forming on flaking chromed parts.
southpawboston is offline  
Likes For southpawboston:
Old 02-05-21, 04:15 PM
  #2  
iab
Senior Member
 
iab's Avatar
 
Join Date: Jun 2006
Location: NW Burbs, Chicago
Posts: 12,156
Mentioned: 200 Post(s)
Tagged: 0 Thread(s)
Quoted: 2992 Post(s)
Liked 3,707 Times in 1,393 Posts
I don't know if it is unusual, but I have several X-Acto knives throughout the house and work. Downstairs toolbox. Garage toolbox. Work-at-home desk. Pen cup next to this computer. Desk at work. Several in the toolbox at the lab at work.

Cutting, cleaning, positions things. Can't imagine doing a job without them.
iab is offline  
Likes For iab:
Old 02-05-21, 04:34 PM
  #3  
oneclick 
Senior Member
 
Join Date: Feb 2020
Posts: 2,890
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1105 Post(s)
Likes: 0
Liked 1,311 Times in 775 Posts
I asked my dentist and she said "Sure" and shoved a box full of old picks at me - lifetime supply. They're awesome for cleaning crevices like fine threads and bearing-seat corners and stamped/engraved details, and you can grind their tips for special purposes.

Often used with loupes - get one if you don't have one, they're great for checking bearing races and looking for cracks. A cheapie will do fine.

Supermagnet - stick it on the screwdriver shank somewhere near the tip; reduces swearing.

Last edited by oneclick; 02-05-21 at 04:37 PM.
oneclick is offline  
Old 02-05-21, 04:52 PM
  #4  
nlerner
Senior Member
 
Join Date: Dec 2005
Posts: 17,127
Mentioned: 480 Post(s)
Tagged: 0 Thread(s)
Quoted: 3788 Post(s)
Liked 6,574 Times in 2,580 Posts
Something I learned here: feeler gauges to use as metal shims. Cheap and effective.
nlerner is offline  
Likes For nlerner:
Old 02-05-21, 04:59 PM
  #5  
Kabuki12
Senior Member
 
Join Date: Jan 2016
Posts: 3,405
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 863 Post(s)
Liked 2,225 Times in 1,248 Posts
I am a tool grinder by trade so I always have my “Optivisor” handy. I also use dental picks and very small bottle brushes.
Kabuki12 is offline  
Likes For Kabuki12:
Old 02-05-21, 05:47 PM
  #6  
southpawboston
Senior Member
Thread Starter
 
southpawboston's Avatar
 
Join Date: Aug 2008
Location: Somerville, MA and Catskill Mtns
Posts: 4,150
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 78 Post(s)
Liked 182 Times in 89 Posts
Originally Posted by nlerner
Something I learned here: feeler gauges to use as metal shims. Cheap and effective.
Ha, that's a great idea for when you need to dial in just the right thickness. I keep a few small aluminum and brass sheet stocks of different thicknesses as shims, I get them at Blick Art Supply, but it's not always possible to dial in the right thickness!

Last edited by southpawboston; 02-05-21 at 06:29 PM.
southpawboston is offline  
Old 02-05-21, 06:28 PM
  #7  
SurferRosa
señor miembro
 
SurferRosa's Avatar
 
Join Date: Dec 2018
Location: Pac NW
Posts: 8,259

Bikes: '70s - '80s Campagnolo

Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3846 Post(s)
Liked 6,437 Times in 3,183 Posts
Rubber nipples in assorted sizes. You just never know.
SurferRosa is offline  
Old 02-05-21, 07:08 PM
  #8  
merziac
Senior Member
 
merziac's Avatar
 
Join Date: Oct 2015
Location: PDX
Posts: 14,101

Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2

Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4493 Post(s)
Liked 6,299 Times in 3,633 Posts
Because every fixed cup always comes out, period.




merziac is offline  
Likes For merziac:
Old 02-05-21, 07:40 PM
  #9  
mechanicmatt
Hoards Thumbshifters
 
mechanicmatt's Avatar
 
Join Date: Jul 2010
Location: Signal Mountain, TN
Posts: 1,173

Bikes: '23 Black Mtn MC, '87 Bruce Gordon Chinook, '08 Jamis Aurora, '86 Trek 560, '97 Mongoose Rockadile, & '91 Trek 750

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 245 Post(s)
Liked 322 Times in 189 Posts
Dental picks! Also I have an older couple of thin walled sockets in 14mm, 15mm that can remove old crank bolts. Most sockets these days are too thick for it.
mechanicmatt is offline  
Old 02-05-21, 07:56 PM
  #10  
jdawginsc 
Edumacator
 
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,429

Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...

Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 2385 Post(s)
Liked 2,931 Times in 1,862 Posts
Medicine dropper and dawn...
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super












jdawginsc is offline  
Old 02-05-21, 11:48 PM
  #11  
cyccommute 
Mad bike riding scientist
 
cyccommute's Avatar
 
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,274

Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones

Mentioned: 150 Post(s)
Tagged: 1 Thread(s)
Quoted: 6147 Post(s)
Liked 4,093 Times in 2,325 Posts
I keep a bearing cup, a large fender washer (or 2), an crank bolt, or crank nut (depending on the spindle) on hand. They all hold the fixed cup wrench in place and is a bit more refined than merziac’s method. I also remove the fixed cup first with this tool. I found that works better than doing the adjustable cup first.







Other items I use: A syringe and basting needle for injecting water under grips to slide them off. I also have a spoke with a sharpened tip as a pokey tool. As we say at my co-op, it’s for “poking stuff”. I also have empty Gatorade bottles that I use to clean chains. I put in mineral spirits, the chain, agitate for 30 seconds or so, and then fish out the chain. The chain comes out clean as a whistle.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!




Last edited by cyccommute; 02-05-21 at 11:56 PM.
cyccommute is offline  
Likes For cyccommute:
Old 02-06-21, 05:10 AM
  #12  
oneclick 
Senior Member
 
Join Date: Feb 2020
Posts: 2,890
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1105 Post(s)
Likes: 0
Liked 1,311 Times in 775 Posts
Originally Posted by cyccommute
I keep a bearing cup, a large fender washer (or 2), an crank bolt, or crank nut (depending on the spindle) on hand. They all hold the fixed cup wrench in place and is a bit more refined than merziac’s method. I also remove the fixed cup first with this tool. I found that works better than doing the adjustable cup first.
The most portable version is a short fat bolt & nut and two washers; small enough to put in the long-and-far-away touring toolkit.


Originally Posted by cyccommute
Other items I use: A syringe and basting needle for injecting water under grips to slide them off.
WD40 aerosol works a treat; the trick is slide the little red tube in by itself, then attach and squirt.
oneclick is offline  
Old 02-06-21, 07:12 AM
  #13  
acm
Senior Member
 
acm's Avatar
 
Join Date: May 2019
Location: Rochester, NY
Posts: 59

Bikes: '84 Centurion Pro Tour 15; '97 Cannondale M900

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 22 Post(s)
Liked 38 Times in 20 Posts
A ball of butchers twine I stole from the kitchen and never returned (my wife is vegetarian, so I don't get to use it that often anyway!), I prefer it zip ties for lashing things together temporarily.

I've also have a basting needle from the kitchen (again, vegetarian wife) which I've used as pick/small drift pin.
acm is offline  
Old 02-06-21, 07:31 AM
  #14  
dedhed
SE Wis
 
dedhed's Avatar
 
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,516

Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970

Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2731 Post(s)
Liked 3,361 Times in 2,034 Posts
Old toothbrushes.
dedhed is offline  
Likes For dedhed:
Old 02-06-21, 08:18 AM
  #15  
Rage
Space Ghost
 
Rage's Avatar
 
Join Date: Oct 2017
Location: NYC
Posts: 1,762

Bikes: Bridgestone, Fuji, Iro, Jamis, Gary Fisher, GT, Scott, Specialized and more

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 292 Post(s)
Liked 411 Times in 317 Posts
Lineman’s pliers and pipe cutter, and instead of dental picks I use these cheap sculpting tools I upgraded from many years ago.
Rage is offline  
Old 02-06-21, 09:07 AM
  #16  
southpawboston
Senior Member
Thread Starter
 
southpawboston's Avatar
 
Join Date: Aug 2008
Location: Somerville, MA and Catskill Mtns
Posts: 4,150
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 78 Post(s)
Liked 182 Times in 89 Posts
I use this syringe with luer-lock fitting from a lab HPLC for adding oil to a Sturmey Archer IGH.

southpawboston is offline  
Likes For southpawboston:
Old 02-06-21, 09:54 AM
  #17  
cyccommute 
Mad bike riding scientist
 
cyccommute's Avatar
 
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,274

Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones

Mentioned: 150 Post(s)
Tagged: 1 Thread(s)
Quoted: 6147 Post(s)
Liked 4,093 Times in 2,325 Posts
Originally Posted by oneclick
The most portable version is a short fat bolt & nut and two washers; small enough to put in the long-and-far-away touring toolkit.
Taking a fixed cup off while on tour is way down on the list of things I need to carry the tools for. I’ve done close to 20,000 miles of loaded touring and never had to do any kind of maintenance on a bottom bracket. For the shop, I think you are talking about the Sheldon Brown method but I’ve never found that work all that well. This method works much better.

WD40 aerosol works a treat; the trick is slide the little red tube in by itself, then attach and squirt.
Nope. I reuse my grips and I’m not going to use an oil on them. I’d rather have my grips not be lubricated so that they just spin on the bars.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!



cyccommute is offline  
Old 02-06-21, 10:06 AM
  #18  
Pompiere
Senior Member
 
Pompiere's Avatar
 
Join Date: Nov 2005
Location: NW Ohio
Posts: 3,426

Bikes: 1984 Miyata 310, 1986 Schwinn Sierra, 2011 Jamis Quest, 1980 Peugeot TH8 Tandem, 1992 Performance Parabola, 1987 Ross Mt. Hood, 1988 Schwinn LeTour, 1988 Trek 400T, 1981 Fuji S12-S LTD, 197? FW Evans

Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 522 Post(s)
Liked 943 Times in 495 Posts
Originally Posted by acm
A ball of butchers twine I stole from the kitchen and never returned (my wife is vegetarian, so I don't get to use it that often anyway!), I prefer it zip ties for lashing things together temporarily.

I've also have a basting needle from the kitchen (again, vegetarian wife) which I've used as pick/small drift pin.
Twine also works well as dental floss for cleaning between the sprockets on freewheels.
Pompiere is offline  
Likes For Pompiere:
Old 02-06-21, 10:10 AM
  #19  
seypat
Senior Member
 
Join Date: Oct 2010
Posts: 8,758
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 3192 Post(s)
Liked 2,460 Times in 1,489 Posts
A couple of nickels for adjusting brake calipers/pads.
seypat is online now  
Likes For seypat:
Old 02-06-21, 10:31 AM
  #20  
dweenk
Senior Member
 
dweenk's Avatar
 
Join Date: Mar 2013
Location: Maryland
Posts: 3,980

Bikes: Lots of English 3-speeds, a couple of old road bikes, 3 mountain bikes, 1 hybrid, and a couple of mash-ups

Mentioned: 53 Post(s)
Tagged: 0 Thread(s)
Quoted: 887 Post(s)
Liked 335 Times in 225 Posts
An awl, a larger version of the spoke "pokey tool" for rounding crushed ends of cable housing. Bits of left over inner cable to insert into housing when I cut it so I don't need to use the awl.
dweenk is offline  
Likes For dweenk:
Old 02-06-21, 10:45 AM
  #21  
southpawboston
Senior Member
Thread Starter
 
southpawboston's Avatar
 
Join Date: Aug 2008
Location: Somerville, MA and Catskill Mtns
Posts: 4,150
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 78 Post(s)
Liked 182 Times in 89 Posts
Originally Posted by dweenk
An awl, a larger version of the spoke "pokey tool" for rounding crushed ends of cable housing. Bits of left over inner cable to insert into housing when I cut it so I don't need to use the awl.
Yeah, a simple scratch awl is an oft-used tool in my shop. In a pinch it can also deburr drilled holes. I used to use it for cable ends too, until bought a Pedro's housing cutter with built in awl for that purpose.
southpawboston is offline  
Old 02-06-21, 01:57 PM
  #22  
billridesbikes
Senior Member
 
Join Date: Nov 2019
Posts: 701
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 347 Post(s)
Liked 418 Times in 250 Posts
Box of old business cards for toeing-in brake shoes.
billridesbikes is offline  
Likes For billridesbikes:
Old 02-06-21, 02:58 PM
  #23  
SJX426 
Senior Member
 
SJX426's Avatar
 
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,580

Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8

Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1601 Post(s)
Liked 2,187 Times in 1,092 Posts
OK well I have an air compressor that is very handy. Like removing grips or putting them on. Just stick the nozzle under the rubber and the grip floats off.
__________________
Bikes don't stand alone. They are two tired.
SJX426 is offline  
Likes For SJX426:
Old 02-06-21, 03:39 PM
  #24  
Wildwood 
Veteran, Pacifist
 
Wildwood's Avatar
 
Join Date: Dec 2004
Location: Seattle area
Posts: 13,304

Bikes: Bikes??? Thought this was social media?!?

Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3876 Post(s)
Liked 4,781 Times in 2,206 Posts
Would 3.5mm hex for Campi Delta brake maintenance count as unlikely?

Or those tiny hex sizes for some vintage tt cable guide bolts.


My father's vintage screw clamp (with rag covering metal surfaces) makes a great '3rd Hand' brake holding/repairing tool. One clamp fits all brake sizes.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Wildwood is offline  
Old 02-06-21, 03:42 PM
  #25  
nlerner
Senior Member
 
Join Date: Dec 2005
Posts: 17,127
Mentioned: 480 Post(s)
Tagged: 0 Thread(s)
Quoted: 3788 Post(s)
Liked 6,574 Times in 2,580 Posts
I keep waiting for someone to say a condom. Hopefully, not a used one.
nlerner is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.