What type of wrenches?
#1
Senior Member
Thread Starter
What type of wrenches?
My sister want to learn to ride a bike. I have seen some YouTube videos that teach how to ride a bike without peddles. I have never remove the peddles from bike. Can use any wrench in my garage that purchased from a hardware store, or should I pick up a specific wrench at a bike shop to remove the peddles?
#3
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,985
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6193 Post(s)
Liked 4,808 Times
in
3,316 Posts
If the bikes is an old bike with a one-piece crank, then it may be 1/2 inch. Some pedals whether the more normal today 15 mm or 1/2" of times gone by don't allow a wrench of normal thicknesses to be used. Some pedals no longer have flats for a open end wrench and require a hex key from the back side, which screws up your idea about which way to rotate the wrench since you are now looking from the backside wanting the screw to go away from you.
#4
Member
Likes For nel e nel:
#5
Senior Member
Join Date: Sep 2017
Posts: 7,877
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 6963 Post(s)
Liked 10,962 Times
in
4,688 Posts
My sister want to learn to ride a bike. I have seen some YouTube videos that teach how to ride a bike without peddles. I have never remove the peddles from bike. Can use any wrench in my garage that purchased from a hardware store, or should I pick up a specific wrench at a bike shop to remove the peddles?
PS: You sound like a good brother!
Likes For Koyote:
Likes For MudPie:
#7
Senior Member
The only issue you may encounter with a ‘normal’ wrench is that the flats may be too thick to fit on the flats of the pedal spindle depending on the design. If it’s an old wrench, you can grind them down to fit but that’s a decent amount of work even with a bench grinder (and I’m guessing you don’t just have one sitting nearby). If it can wait a few days, a proper pedal wrench will make your life much easier. If nothing else, it will be longer giving you more leverage for the inevitably over-tightened pedals you’ll encounter.
FWIW, both of my sons learned to coast on a Strider by age 2 and were pedaling on a two wheeler at age 3. I am a huge fan of the no-pedals technique and recommend it to anyone learning to ride a bike or even just reacquaint themselves with one.
FWIW, both of my sons learned to coast on a Strider by age 2 and were pedaling on a two wheeler at age 3. I am a huge fan of the no-pedals technique and recommend it to anyone learning to ride a bike or even just reacquaint themselves with one.
#8
Senior Member
Join Date: Jun 2020
Location: Maryland
Posts: 1,380
Bikes: 1982 Bianchi Sport SX, Rayleigh Tamland 1, Rans V-Rex recumbent, Fuji MTB, 80's Cannondale MTB with BBSHD ebike motor
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 668 Post(s)
Liked 529 Times
in
355 Posts
A REALLY good brother would just buy a dedicated push bike, LOL
https://www.specialized.com/us/en/ho...ext=94021-0005
https://www.specialized.com/us/en/ho...ext=94021-0005
#10
Really Old Senior Member
In a couple years.....
Or put a piece of pipe over the wrench to increase leverage.
How you position yourself in relation to the crank arm AND wrench orientation.
Try to have the force going straight down with the arms at 3 & 9 o'clock.
Hold the other crank arm with your other hand, pushing down.
#11
Senior Member
Join Date: Jun 2019
Posts: 640
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 346 Post(s)
Likes: 0
Liked 396 Times
in
259 Posts
Essentially the same way as one teaches their daughters to remove the Lug Nuts on a car.......when teaching them how to change a car's tire.
Well, as you know the lug nuts on a car's wheel are typically tightened with an air-impact wrench when new tires are installed or when the tires are rotated....etc...
Heck, it can be a serious fight sometimes for a strong young man if they are simply just using their arm strength with the Lug Wrench(tire tool..)
....Well how an old person can do it , and how to teach a 16 year old daughter to easily do it......IS TO USE YOUR LEG POWER and stand-on the end of the car's lug wrench....................don't necessarily karate kick it like cranking an old motorcycle ...DON'T because if you kick it wrong....you can send the Wrench flying off and it can hit the car denting it, or could hit you or somebody nearby....not good...right.......thats why............................giving it the ol Chuck Norris kick will work, possibly faster, but with serious potential risk of flying wrench impact damage to you or somebody near you or something nearby.
Obviously, the longest handle wrench that you have that FITS the bike pedals will give you the greatest leverage, but you absolutely need the correct size or an adjustable Crescent Wrench that is also narrow enough to work. YOU DO NOT NEED A QUALITY WRENCH FOR BIKE PEDAL REMOVAL & INSTALLATION. Any el-cheapo Chinese steel wrench from the likes of Harbor Freight, Family Dollar, Dollar General, Auto Zone, O'Reillys, Advance Auto, Northern Tool, WALMART, Lowes, Home Depot, Tractor Supply, Ace Hardware, NAPA, Target, Kroger, or anywhere else that you can buy very inexpensive cheap wrenches & or adjustable small Crescent wrench. You don't need quality tools like Snap-On or old style Sears CRAFTSMAN, etc... You're not gonna use them enough to wear them out or break them , during the next thirty years..............yeah, they will rust and the horrible chrome plating will deteriorate but they will function decades from now. If you're a professional plumber or mechanical contractor/HVAC technician or Auto mechanic/SAE certified auto technician, then you'd need quality tools because they use them so often and their physical shape/contour matters as something as minor as shaping makes it easier/faster to work in tight spaces and makes for a better human hand grip and better comfort for the person's hand and arm. Time is money and speed and comfort are huge in the professional trades..............also tool breakage or/and marring/ruining a bolt head or nut or the fastener/part itself is a huge deal as it causes a major delay when that occurs...............also if nothing else and nothing breaks or ever goes wrong, just having more comfortable ( ergonomic) tools allows the professional to do the job slightly faster.........yeah maybe only minutes faster but over the period of a month, or a quarter, or a year's time, it does make a difference in profit and the best quality tools more than pay for themselves..................but for the average homeowner, one just really does not need fancy brand name quality wrenches............even if a minor hobbyist with old cars, old motorcycles, and old bicycles.
The $1 or so cheapie chrome steel china made wrench from the likes of Harbor Freight store, or direct from some ShenZhen based massive Chinese seller on e-bay is not gonna be any worse than the most expensive tool, as long as it is the size that fits. That $1 cheapie wrench will not last as long as a quality tool, but you aren't gonna do three thousand bicycles and other project uses with it during the next five years. You'll more than get your money's worth on the cheapie.
Another thing, don't worry about the cheapie tool.......for example, suppose that you need more LEVERAGE......you could if you have a suitable piece of scrap galvanized steel pipe or other steel pipe............place the pipe over the end of the wrench as an extender bar................you might have to fill space with something like inner tube wrap or duct tape etc to make the pipe fit the wrench snuggly enough..........................hey you can also bang/hit the end of a cheapie wrench to get certain jobs done...who the heck cares if the cheap wrench gets mucked up, as long as you accomplish your task.........so you modify or ruin a cheapie wrench............BFD (big f-en deal) as it only cost you a couple of bucks. MacGyver (the real one as played by Richard Dean Anderson) would likely approve! Remember that if things look really RUSTY & frozen with huge amounts of rust....you could try letting some Penetrating Oil attack it for a few days before trying to loosen it.
Well, as you know the lug nuts on a car's wheel are typically tightened with an air-impact wrench when new tires are installed or when the tires are rotated....etc...
Heck, it can be a serious fight sometimes for a strong young man if they are simply just using their arm strength with the Lug Wrench(tire tool..)
....Well how an old person can do it , and how to teach a 16 year old daughter to easily do it......IS TO USE YOUR LEG POWER and stand-on the end of the car's lug wrench....................don't necessarily karate kick it like cranking an old motorcycle ...DON'T because if you kick it wrong....you can send the Wrench flying off and it can hit the car denting it, or could hit you or somebody nearby....not good...right.......thats why............................giving it the ol Chuck Norris kick will work, possibly faster, but with serious potential risk of flying wrench impact damage to you or somebody near you or something nearby.
Obviously, the longest handle wrench that you have that FITS the bike pedals will give you the greatest leverage, but you absolutely need the correct size or an adjustable Crescent Wrench that is also narrow enough to work. YOU DO NOT NEED A QUALITY WRENCH FOR BIKE PEDAL REMOVAL & INSTALLATION. Any el-cheapo Chinese steel wrench from the likes of Harbor Freight, Family Dollar, Dollar General, Auto Zone, O'Reillys, Advance Auto, Northern Tool, WALMART, Lowes, Home Depot, Tractor Supply, Ace Hardware, NAPA, Target, Kroger, or anywhere else that you can buy very inexpensive cheap wrenches & or adjustable small Crescent wrench. You don't need quality tools like Snap-On or old style Sears CRAFTSMAN, etc... You're not gonna use them enough to wear them out or break them , during the next thirty years..............yeah, they will rust and the horrible chrome plating will deteriorate but they will function decades from now. If you're a professional plumber or mechanical contractor/HVAC technician or Auto mechanic/SAE certified auto technician, then you'd need quality tools because they use them so often and their physical shape/contour matters as something as minor as shaping makes it easier/faster to work in tight spaces and makes for a better human hand grip and better comfort for the person's hand and arm. Time is money and speed and comfort are huge in the professional trades..............also tool breakage or/and marring/ruining a bolt head or nut or the fastener/part itself is a huge deal as it causes a major delay when that occurs...............also if nothing else and nothing breaks or ever goes wrong, just having more comfortable ( ergonomic) tools allows the professional to do the job slightly faster.........yeah maybe only minutes faster but over the period of a month, or a quarter, or a year's time, it does make a difference in profit and the best quality tools more than pay for themselves..................but for the average homeowner, one just really does not need fancy brand name quality wrenches............even if a minor hobbyist with old cars, old motorcycles, and old bicycles.
The $1 or so cheapie chrome steel china made wrench from the likes of Harbor Freight store, or direct from some ShenZhen based massive Chinese seller on e-bay is not gonna be any worse than the most expensive tool, as long as it is the size that fits. That $1 cheapie wrench will not last as long as a quality tool, but you aren't gonna do three thousand bicycles and other project uses with it during the next five years. You'll more than get your money's worth on the cheapie.
Another thing, don't worry about the cheapie tool.......for example, suppose that you need more LEVERAGE......you could if you have a suitable piece of scrap galvanized steel pipe or other steel pipe............place the pipe over the end of the wrench as an extender bar................you might have to fill space with something like inner tube wrap or duct tape etc to make the pipe fit the wrench snuggly enough..........................hey you can also bang/hit the end of a cheapie wrench to get certain jobs done...who the heck cares if the cheap wrench gets mucked up, as long as you accomplish your task.........so you modify or ruin a cheapie wrench............BFD (big f-en deal) as it only cost you a couple of bucks. MacGyver (the real one as played by Richard Dean Anderson) would likely approve! Remember that if things look really RUSTY & frozen with huge amounts of rust....you could try letting some Penetrating Oil attack it for a few days before trying to loosen it.