ISO and For Trade thread parts 2 and 3.
Senior Member
Join Date: Aug 2013
Location: San Francisco
Posts: 833
Bikes: '68 Raleigh Suberbe, '92 (German) Centurion Equipe, '85 Schwinn Peloton, 1983ish Zunow Road Racer project, '69 Squanch Super Tourer, 1980 Bianchi Super Corsa, '82 Austro-Daimler Vent Noir, '89 Miyata 914 project, 1982ish Bianchi Rallye
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 294 Post(s)
Liked 9 Times
in
9 Posts
FT / ISO Nitto Selle Rigida
Have:
23" 1987 Panasonic PT-3500 touring bike. Oiginal but has newer Tektro brake levers.
Nitto Dirt drop 2 bolt with cable hole VG 22.2 / 26.4 (had Cinelli bar but likely made to clamp 26)
Used Wheelset: (helicomatic freewheel) Maillard hubs Rigida 700c Model 1320 rims with SS spokes good usable, need cleanup. Some braking surface wear. original skewers
Sachs-Maillard 12-28 7-speed freewheel (standard, not for above wheelset) very good condition, just clean and lube it.
Selle Royale Futura tan suede saddle. good used condition, no tears. Chrome rails.
Looking for 1980s:
Japanese 26.6 seatpost. Must be non-fluted. Tange, SR, etc
White bar tape (I know)
Avocet Touring saddle.
Japanese 165mm triple crank
Dia Compe cantilever quickrelease thing w/wheel
Front Blackburn rack
Interesting 22" / 56cm bike or frame+fork
decaleur
pics emailed on request
PM if interested in trading.
23" 1987 Panasonic PT-3500 touring bike. Oiginal but has newer Tektro brake levers.
Nitto Dirt drop 2 bolt with cable hole VG 22.2 / 26.4 (had Cinelli bar but likely made to clamp 26)
Used Wheelset: (helicomatic freewheel) Maillard hubs Rigida 700c Model 1320 rims with SS spokes good usable, need cleanup. Some braking surface wear. original skewers
Sachs-Maillard 12-28 7-speed freewheel (standard, not for above wheelset) very good condition, just clean and lube it.
Selle Royale Futura tan suede saddle. good used condition, no tears. Chrome rails.
Looking for 1980s:
Japanese 26.6 seatpost. Must be non-fluted. Tange, SR, etc
White bar tape (I know)
Avocet Touring saddle.
Japanese 165mm triple crank
Dia Compe cantilever quickrelease thing w/wheel
Front Blackburn rack
Interesting 22" / 56cm bike or frame+fork
decaleur
pics emailed on request
PM if interested in trading.
Last edited by artclone; 02-01-16 at 06:55 PM.
Senior Member
Join Date: Apr 2015
Posts: 948
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 377 Post(s)
Likes: 0
Liked 14 Times
in
10 Posts
Have:
23" Panasonic PT-3500 touring bike.
Nitto Dirt drop 2 bolt with cable hole VG 22.2 / 26.4 (had Cinelli bar but likely made to clamp 26)
Used Wheelset: (helicomatic freewheel) Maillard hubs Rigida 700c Model 1320 rims with SS spokes good usable, need cleanup. Some braking surface wear. original skewers
Sachs-Maillard 12-28 7-speed freewheel (standard, not for above wheelset) very good condition, just clean and lube it.
Selle Royale Futura tan suede saddle. good used condition, no tears. Chrome rails.
Looking for 1980s:
Japanese 26.6 seatpost. Must be non-fluted. Tange, SR, etc
White bar tape (I know)
Avocet Touring saddle.
Japanese 165mm triple crank
Dia Compe cantilever quickrelease thing w/wheel
Front Blackburn rack
22" / 56cm touring bike or frame+fork
decaleur
pics emailed on request
PM if interested in trading.
23" Panasonic PT-3500 touring bike.
Nitto Dirt drop 2 bolt with cable hole VG 22.2 / 26.4 (had Cinelli bar but likely made to clamp 26)
Used Wheelset: (helicomatic freewheel) Maillard hubs Rigida 700c Model 1320 rims with SS spokes good usable, need cleanup. Some braking surface wear. original skewers
Sachs-Maillard 12-28 7-speed freewheel (standard, not for above wheelset) very good condition, just clean and lube it.
Selle Royale Futura tan suede saddle. good used condition, no tears. Chrome rails.
Looking for 1980s:
Japanese 26.6 seatpost. Must be non-fluted. Tange, SR, etc
White bar tape (I know)
Avocet Touring saddle.
Japanese 165mm triple crank
Dia Compe cantilever quickrelease thing w/wheel
Front Blackburn rack
22" / 56cm touring bike or frame+fork
decaleur
pics emailed on request
PM if interested in trading.
Senior Member
Join Date: Mar 2013
Location: Maryland
Posts: 3,800
Bikes: Lots of English 3-speeds, a couple of old road bikes, 3 mountain bikes, 1 hybrid, and a couple of mash-ups
Mentioned: 53 Post(s)
Tagged: 0 Thread(s)
Quoted: 887 Post(s)
Liked 335 Times
in
225 Posts
Have:
23" Panasonic PT-3500 touring bike.
Nitto Dirt drop 2 bolt with cable hole VG 22.2 / 26.4 (had Cinelli bar but likely made to clamp 26)
Used Wheelset: (helicomatic freewheel) Maillard hubs Rigida 700c Model 1320 rims with SS spokes good usable, need cleanup. Some braking surface wear. original skewers
Sachs-Maillard 12-28 7-speed freewheel (standard, not for above wheelset) very good condition, just clean and lube it.
Selle Royale Futura tan suede saddle. good used condition, no tears. Chrome rails.
Looking for 1980s:
Japanese 26.6 seatpost. Must be non-fluted. Tange, SR, etc
White bar tape (I know)
Avocet Touring saddle.
Japanese 165mm triple crank
Dia Compe cantilever quickrelease thing w/wheel
Front Blackburn rack
22" / 56cm touring bike or frame+fork
decaleur
pics emailed on request
PM if interested in trading.
23" Panasonic PT-3500 touring bike.
Nitto Dirt drop 2 bolt with cable hole VG 22.2 / 26.4 (had Cinelli bar but likely made to clamp 26)
Used Wheelset: (helicomatic freewheel) Maillard hubs Rigida 700c Model 1320 rims with SS spokes good usable, need cleanup. Some braking surface wear. original skewers
Sachs-Maillard 12-28 7-speed freewheel (standard, not for above wheelset) very good condition, just clean and lube it.
Selle Royale Futura tan suede saddle. good used condition, no tears. Chrome rails.
Looking for 1980s:
Japanese 26.6 seatpost. Must be non-fluted. Tange, SR, etc
White bar tape (I know)
Avocet Touring saddle.
Japanese 165mm triple crank
Dia Compe cantilever quickrelease thing w/wheel
Front Blackburn rack
22" / 56cm touring bike or frame+fork
decaleur
pics emailed on request
PM if interested in trading.
Senior Member
Join Date: Aug 2013
Location: San Francisco
Posts: 833
Bikes: '68 Raleigh Suberbe, '92 (German) Centurion Equipe, '85 Schwinn Peloton, 1983ish Zunow Road Racer project, '69 Squanch Super Tourer, 1980 Bianchi Super Corsa, '82 Austro-Daimler Vent Noir, '89 Miyata 914 project, 1982ish Bianchi Rallye
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 294 Post(s)
Liked 9 Times
in
9 Posts
Senior Member
Join Date: Aug 2013
Location: San Francisco
Posts: 833
Bikes: '68 Raleigh Suberbe, '92 (German) Centurion Equipe, '85 Schwinn Peloton, 1983ish Zunow Road Racer project, '69 Squanch Super Tourer, 1980 Bianchi Super Corsa, '82 Austro-Daimler Vent Noir, '89 Miyata 914 project, 1982ish Bianchi Rallye
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 294 Post(s)
Liked 9 Times
in
9 Posts
@Pemetic2006
"What year is the 3500? "
It's an 1987 with yellow decals on metallic gray paint. , added to FT post. Thanks!
"What year is the 3500? "
It's an 1987 with yellow decals on metallic gray paint. , added to FT post. Thanks!
Senior Member
ISO; Stronglight 93 170mm NDS crank arm 14/1.25 french thread
Lots to trade; Various mid range RDs, FDs, DTs, Thumbies, Shimano top tube cable clamps (new), Lots of chainrings, Sugino, Campy, Stronglight, Shimano. Park CCP-1 crank puller. Barend shifters. etc.
Lots to trade; Various mid range RDs, FDs, DTs, Thumbies, Shimano top tube cable clamps (new), Lots of chainrings, Sugino, Campy, Stronglight, Shimano. Park CCP-1 crank puller. Barend shifters. etc.
__________________
Be where your feet are.......Lisa Bluder
Be where your feet are.......Lisa Bluder
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,584
Mentioned: 90 Post(s)
Tagged: 0 Thread(s)
Quoted: 1444 Post(s)
Liked 1,063 Times
in
788 Posts
HAVE: Fuji Valite steel fork from a Sangres, marked "Ishiwata 5.L" on the steerer so now you know who supplied the Valite tubing to Fuji.
It has about 7.5" of steerer and comes with the crownrace, stamped Suntour ends with single eyelets, bulge-formed sloping crown with "FUJI" engraved...nothin' special but decent.
NEED: good quality sealed BB unit for a Mtn. bike: 73mm width by 109mm spindle, Brit/ISO threading (1.37" x 24tpi), it will replace a Shimano UN55 so about that grade will do.
Shipping: you pay actual cost for the fork shipping, I'll pay actual cost for the BB unit shipping.
It has about 7.5" of steerer and comes with the crownrace, stamped Suntour ends with single eyelets, bulge-formed sloping crown with "FUJI" engraved...nothin' special but decent.
NEED: good quality sealed BB unit for a Mtn. bike: 73mm width by 109mm spindle, Brit/ISO threading (1.37" x 24tpi), it will replace a Shimano UN55 so about that grade will do.
Shipping: you pay actual cost for the fork shipping, I'll pay actual cost for the BB unit shipping.
Last edited by unworthy1; 02-02-16 at 12:10 AM.
Senior Member
Want:
- Brake levers/calipers for a 1984 Guerciotti GLX. Campy (Victory, NR, SR) is preferred, but I realize that might be a stretch, so I'm open to any and all brands. Mainly looking for gum-wall hoods and I'm partial to drilled levers.
Have:
- Shimano Crane Rear Derailleur
- Suntour XC 9000 Rear Derailleur
- Mavic 860 Front Derailleur (Braze-on)
- Shimano Deore Crankset (I'll have to count the teeth when I get home to confirm, but it's kinda an odd combo with I think 50T-32T rings).
- Modolo X-Setra Bars
- Nitto Triathalon Quill Stem
- Shimano 600 Tri Color Brake Calipers
- 8sp. Dura-Ace Cassette (12-21T)
- Suntour Cyclone Pedals (missing dustcaps/dustcap threading is damaged on one of the pedals so you likely won't be able to install one).
- Wrights W3N saddle
- American Classic 27.2mm Seatpost
Willing to also purchase outright if nothing I have is of interest. I can provide pictures of any items upon request. Thanks!
- Brake levers/calipers for a 1984 Guerciotti GLX. Campy (Victory, NR, SR) is preferred, but I realize that might be a stretch, so I'm open to any and all brands. Mainly looking for gum-wall hoods and I'm partial to drilled levers.
Have:
- Shimano Crane Rear Derailleur
- Suntour XC 9000 Rear Derailleur
- Mavic 860 Front Derailleur (Braze-on)
- Shimano Deore Crankset (I'll have to count the teeth when I get home to confirm, but it's kinda an odd combo with I think 50T-32T rings).
- Modolo X-Setra Bars
- Nitto Triathalon Quill Stem
- Shimano 600 Tri Color Brake Calipers
- 8sp. Dura-Ace Cassette (12-21T)
- Suntour Cyclone Pedals (missing dustcaps/dustcap threading is damaged on one of the pedals so you likely won't be able to install one).
- Wrights W3N saddle
- American Classic 27.2mm Seatpost
Willing to also purchase outright if nothing I have is of interest. I can provide pictures of any items upon request. Thanks!
1/2 as far in 2x the time
Join Date: Nov 2013
Location: Northern Bergen County, NJ
Posts: 1,746
Bikes: Yes, Please.
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 499 Post(s)
Liked 285 Times
in
222 Posts
I think it's a 140. If you're interested, pm me.
Cheers, Eric
Senior Member
Join Date: Jul 2004
Location: Yukon, Canada
Posts: 8,759
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 113 Post(s)
Likes: 0
Liked 16 Times
in
14 Posts
HAVE: Fuji Valite steel fork from a Sangres, marked "Ishiwata 5.L" on the steerer so now you know who supplied the Valite tubing to Fuji.
It has about 7.5" of steerer and comes with the crownrace, stamped Suntour ends with single eyelets, bulge-formed sloping crown with "FUJI" engraved...nothin' special but decent.
NEED: good quality sealed BB unit for a Mtn. bike: 73mm width by 109mm spindle, Brit/ISO threading (1.37" x 24tpi), it will replace a Shimano UN55 so about that grade will do.
Shipping: you pay actual cost for the fork shipping, I'll pay actual cost for the BB unit shipping.
It has about 7.5" of steerer and comes with the crownrace, stamped Suntour ends with single eyelets, bulge-formed sloping crown with "FUJI" engraved...nothin' special but decent.
NEED: good quality sealed BB unit for a Mtn. bike: 73mm width by 109mm spindle, Brit/ISO threading (1.37" x 24tpi), it will replace a Shimano UN55 so about that grade will do.
Shipping: you pay actual cost for the fork shipping, I'll pay actual cost for the BB unit shipping.
__________________
1 Super Record bike, 1 Nuovo Record bike, 1 Pista, 1 Road, 1 Cyclocross/Allrounder, 1 MTB, 1 Touring, 1 Fixed gear
1 Super Record bike, 1 Nuovo Record bike, 1 Pista, 1 Road, 1 Cyclocross/Allrounder, 1 MTB, 1 Touring, 1 Fixed gear
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,584
Mentioned: 90 Post(s)
Tagged: 0 Thread(s)
Quoted: 1444 Post(s)
Liked 1,063 Times
in
788 Posts
the one I'm replacing has integral DS threading on the body, not a cup that can be removed except on the NDS (plastic cup). I see a few BB units on webstore sites with either 73mm width or combo 68/73 bodies, but there are few choices.
Senior Member
Looking for a 56cm Cannondale Silk Road frame and fork. I'm open to all models and colors.
I I know it's obscure, but that's all part of the appeal for me!
I I know it's obscure, but that's all part of the appeal for me!
Full Member
WTB: frame set or bike attributed to Guiseppe Pela with these unique features. 58 - 59cm CtC. no major damage or show queens please.
have; 1960 Cinelli SC frame set or (mostly) complete bike as listed here;
CR_stuff by Jerry Haussler | Photobucket
have; 1960 Cinelli SC frame set or (mostly) complete bike as listed here;
CR_stuff by Jerry Haussler | Photobucket
__________________
WANTED: frame set as listed here; https://www.bikeforums.net/classic-vi...l#post18457595
WANTED: frame set as listed here; https://www.bikeforums.net/classic-vi...l#post18457595
Senior Member
Need, want, desire; Cinelli stem 90/100/110 reach. 26.4 clamp. Black and beat up preferred. You know the one, it's been in you're bin awhile.
HAVE; multiple choices... Brakes, levers, stems, handlebars, hubs, do hickys
Thanks ! 3 SpeedSlow
FOUND ! Robbie Tunes does it again.
HAVE; multiple choices... Brakes, levers, stems, handlebars, hubs, do hickys
Thanks ! 3 SpeedSlow
FOUND ! Robbie Tunes does it again.
Last edited by 3speedslow; 02-03-16 at 07:25 PM. Reason: update
Senior Member
Join Date: Dec 2015
Location: Kansas
Posts: 96
Bikes: Paramount Series II, Gitane Tour De France (2), Raleigh Superbe, Centurion Super Tour 15
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Have: A nice Peugeot Trophy 700c tubular wheelset. Soldered and tied spokes. These are Maillard 500 laced to Super Champion Competition rims. The hubs have Peugeot Trophy labels on them. Labels say by Maillard on them. Rims show little use.
Want: equally as nice 700c clincher wheelset.
Can an make the trade with or without freewheel.
Want: equally as nice 700c clincher wheelset.
Can an make the trade with or without freewheel.
Last edited by Jakenks; 02-04-16 at 09:34 AM.
Super Course fan
Join Date: Sep 2006
Location: Lost on the windswept plains of the Great Black Swamp
Posts: 2,720
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 8 Times
in
8 Posts
ISO: Looking for a fluted SR Laprade (Or similar) seatpost in 26.4.
Have:Stuff.
Have:Stuff.
__________________
I have a white PX-10, a Green Dawes Galaxy and an Orange Falcon, now I'm done.
I have a white PX-10, a Green Dawes Galaxy and an Orange Falcon, now I'm done.
Banned.
Join Date: May 2011
Location: on the beach
Posts: 4,816
Bikes: '73 falcon sr, '76 grand record, '84 davidson
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 59 Post(s)
Likes: 0
Liked 22 Times
in
17 Posts
iso: 36h campy record-like low-flange rear hub
it can be ofmega or similar low flange knock-off.
it can be ugly, but polishable.
126mm old is preferred, but 120mm will work in a pinch.
i'm building a wheel for a friend. already bought spokes. i miscounted the holes of my ofmega hub. it's a 32h, and i need a 36h. (crap.)
it can be ofmega or similar low flange knock-off.
it can be ugly, but polishable.
126mm old is preferred, but 120mm will work in a pinch.
i'm building a wheel for a friend. already bought spokes. i miscounted the holes of my ofmega hub. it's a 32h, and i need a 36h. (crap.)
Senior Member
Senior Member
Super Course fan
Join Date: Sep 2006
Location: Lost on the windswept plains of the Great Black Swamp
Posts: 2,720
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 8 Times
in
8 Posts
Senior Member
Join Date: Jun 2012
Location: Stillwater, OK
Posts: 7,828
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 1872 Post(s)
Liked 692 Times
in
468 Posts
ISO: Quill stem adapter, 1 1/8"
Have: older odds and ends (Older Campy skewer, etc) and some newer stuff (Sram cranks, fd, etc); just ask, maybe I'll have something
Have: older odds and ends (Older Campy skewer, etc) and some newer stuff (Sram cranks, fd, etc); just ask, maybe I'll have something
__________________
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
Super Course fan
Join Date: Sep 2006
Location: Lost on the windswept plains of the Great Black Swamp
Posts: 2,720
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 8 Times
in
8 Posts
A mid 70's Dawes Galaxy frameset I happened upon last Monday. My size and British racing green. I traded my Super Galaxy years ago to get my PX10, I have been wanting another one since.
__________________
I have a white PX-10, a Green Dawes Galaxy and an Orange Falcon, now I'm done.
I have a white PX-10, a Green Dawes Galaxy and an Orange Falcon, now I'm done.
Senior Member
Post will be on it's way.