Avoid inexpensive CO2 Cartridges?
#1
Senior Member
Thread Starter
Join Date: Aug 2012
Location: Los Alamitos, Calif.
Posts: 2,475
Bikes: Canyon Endurace
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 1041 Post(s)
Liked 923 Times
in
540 Posts
Avoid inexpensive CO2 Cartridges?
I know I'm overthinking this but I had to ask... Is there such a thing as a quality/reliable CO2 cartridge or are they pretty much all created equal? I'm going to start carrying a CO2 setup and before I dive in I wanted to ask.
I already know which head unit I'll get, I carry a backup pump, I was just wondering if any company out there might be selling duds?
I already know which head unit I'll get, I carry a backup pump, I was just wondering if any company out there might be selling duds?
#2
Senior Member
Join Date: Oct 2017
Location: Chapel Hill NC
Posts: 1,683
Bikes: 2000 Litespeed Vortex Chorus 10, 1995 DeBernardi Cromor S/S
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 645 Post(s)
Liked 797 Times
in
446 Posts
Tricks is to carry at least 2 cartridges. It’s a good practice anyway, less for if you get two flats, but more for if you fluff the first inflation. FWIW, though, I’ve never come across a dud cartridge, but I also carry a very small mini pump in my jersey pocket - purgatory to pump a tire as a last resort, but I have never had to use it in the wild
#3
Sr Member on Sr bikes
Although I've never used a CO2 inflating system...I'd think that the cartridges are pretty standard. Maybe I'm wrong. But I'd think the head is where you'd want the best/reliable device. As much as I'd like to elimate frame-mounted pumps from my bikes...I'm too pessimistic about CO2 inflation systems. Too many times I've seen riders go to inflate and the CO2 cartridge just go PFSSSSSSSSSST into the air and the tube/tire not get inflated. Since most of my riding is alone I have to maintain a pump, and don't see the sense of carrying both systems with me.
Dan
Dan
#4
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
I relied totally on CO2 for years and it never let me down.
To me the most important thing is not to rush. CO2 is really fast so it's tempting to show off by fixing your flat faster than any onlookers have seen before. I think it's better to take time to be sure your tire bead is seated and your inner tube is out of the way before hitting the CO2.
I'd still be using CO2 but I started riding recumbents with higher volume tires. I'm too cheap to spend 2 cartridges every time that I get a flat.
To me the most important thing is not to rush. CO2 is really fast so it's tempting to show off by fixing your flat faster than any onlookers have seen before. I think it's better to take time to be sure your tire bead is seated and your inner tube is out of the way before hitting the CO2.
I'd still be using CO2 but I started riding recumbents with higher volume tires. I'm too cheap to spend 2 cartridges every time that I get a flat.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
#5
Me duelen las nalgas
Join Date: Aug 2015
Location: Texas
Posts: 13,513
Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 4559 Post(s)
Liked 2,802 Times
in
1,800 Posts
So far I haven't needed my CO2 kit for cycling. I only got it for group rides so folks wouldn't be waiting longer than necessary for me. On solo or casual group rides I use pumps.
But for many years I used CO2 pellet guns for target shooting, including paper punching and metal silhouettes. This was before the more practical compressed air tank generation of pellet guns. Never had a CO2 cartridge dud or failure, even the cheap stuff. Any leaks were always the doodad that penetrates the seal, the O-rings or baffles that trap the expanded gas, not the cartridge itself. Sometimes on really hot days we had to be careful to keep the equipment out of direct sun, but that didn't affect the CO2 cartridges.
If I bought CO2 spares for my bikes, I'd just get whatever is cheapest.
But for many years I used CO2 pellet guns for target shooting, including paper punching and metal silhouettes. This was before the more practical compressed air tank generation of pellet guns. Never had a CO2 cartridge dud or failure, even the cheap stuff. Any leaks were always the doodad that penetrates the seal, the O-rings or baffles that trap the expanded gas, not the cartridge itself. Sometimes on really hot days we had to be careful to keep the equipment out of direct sun, but that didn't affect the CO2 cartridges.
If I bought CO2 spares for my bikes, I'd just get whatever is cheapest.
#7
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,327
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3898 Post(s)
Liked 4,830 Times
in
2,228 Posts
I use the cheap unthreaded ones, never a failure. I think I paid $19.99 for a box of 36 or 48, was either a Dick's or Cabelas. They were in the 'air gun' dept. They have lasted a while, as I hate flats, buy good tires, don't commute and don't live in goathead country.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
#8
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
I've never seen a quality difference between the cheap ones and the expensive ones. So I just buy the cheapest bulk rate I can find.
#9
Senior Member
Aren't there inflator heads out there that are fool proof, ones that you puncture the cartridge, hook up to the valve, and then once its on you unscrew the head to control the flow into the tube?
Unfortunately, I do not have this type, I have the ones you can screw up with.
Unfortunately, I do not have this type, I have the ones you can screw up with.
#10
FLIR Kitten to 0.05C
Join Date: Sep 2014
Location: Lincoln, Nebraska
Posts: 5,331
Bikes: Roadie: Seven Axiom Race Ti w/Chorus 11s. CX/Adventure: Carver Gravel Grinder w/ Di2
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 2349 Post(s)
Liked 406 Times
in
254 Posts
Aren't there inflator heads out there that are fool proof, ones that you puncture the cartridge, hook up to the valve, and then once its on you unscrew the head to control the flow into the tube?
Unfortunately, I do not have this type, I have the ones you can screw up with.
Unfortunately, I do not have this type, I have the ones you can screw up with.
https://www.amazon.com/gp/product/B017KU1DIK/
#11
- Soli Deo Gloria -
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,779
Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix
Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 736 Times
in
469 Posts
Aren't there inflator heads out there that are fool proof, ones that you puncture the cartridge, hook up to the valve, and then once its on you unscrew the head to control the flow into the tube?
Unfortunately, I do not have this type, I have the ones you can screw up with.
Unfortunately, I do not have this type, I have the ones you can screw up with.
The XLAB Nanoflator has this feature.
No Co2 escapes when the cartridge attaches to the inflator. The open/closed valve lets the amount of Co2 entering the presta valve be controlled and it can be shut off at any time.
-Tim-
#13
Callipygian Connoisseur
Join Date: Nov 2008
Posts: 1,373
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 564 Post(s)
Liked 350 Times
in
190 Posts
Kedosto Rules of CO2...
Bring at least two.
Buy a cart size larger than you think you need.
Practice in the comfort of your own home first before attempting roadside repairs.
Don't ever try to use a cart bare handed.
Don't leave the discard on the side of the road (or trail).
-Kedosto
Bring at least two.
Buy a cart size larger than you think you need.
Practice in the comfort of your own home first before attempting roadside repairs.
Don't ever try to use a cart bare handed.
Don't leave the discard on the side of the road (or trail).
-Kedosto
#14
climber has-been
Join Date: Dec 2004
Location: Palo Alto, CA
Posts: 7,098
Bikes: Scott Addict R1, Felt Z1
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 3422 Post(s)
Liked 3,559 Times
in
1,789 Posts
I've been using the Genuine Innovations Airchuck for as long as I can remember. Push to inflate, really hard to screw up.
__________________
Ride, Rest, Repeat. ROUVY: terrymorse
Ride, Rest, Repeat. ROUVY: terrymorse
#15
Old Legs
Join Date: Nov 2016
Location: Mass.
Posts: 1,212
Bikes: '80 Strayvaigin, '84 Ciocc Aelle-Shimano 105, '90 Concorde Astore /Campy Triple ,85 Bridgestone 500/Suntour, 2005 Jamis Quest, 2017 Raleigh Merit 1, Raleigh Carbon Clubman
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 302 Post(s)
Liked 33 Times
in
22 Posts
My 72 yr. Old skinny arms , can no longer push a hand pump. Ive had 3 flats in the last 5 yrs. never an issue with CO2 . KB
#16
- Soli Deo Gloria -
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,779
Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix
Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 736 Times
in
469 Posts
A pump is nice for the first few PSI in a new tube before placing it into the tire and onto the rim.
A few more shots from the pump are helpful to push the tube up into the tire before visual inspection to make sure the tube isn't peeking out under the tire bead.
If all is good then hit it with Co2 to fully inflate.
-Tim-
A few more shots from the pump are helpful to push the tube up into the tire before visual inspection to make sure the tube isn't peeking out under the tire bead.
If all is good then hit it with Co2 to fully inflate.
-Tim-
Likes For TimothyH:
#17
Callipygian Connoisseur
Join Date: Nov 2008
Posts: 1,373
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 564 Post(s)
Liked 350 Times
in
190 Posts
A pump is nice for the first few PSI in a new tube before placing it into the tire and onto the rim.
A few more shots from the pump are helpful to push the tube up into the tire before visual inspection to make sure the tube isn't peeking out under the tire bead.
If all is good then hit it with Co2 to fully inflate.
-Tim-
A few more shots from the pump are helpful to push the tube up into the tire before visual inspection to make sure the tube isn't peeking out under the tire bead.
If all is good then hit it with Co2 to fully inflate.
-Tim-
My technique, exactly. Works every time.
-Kedosto
#18
Senior Member
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,549
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5224 Post(s)
Liked 3,581 Times
in
2,342 Posts
I've been using the Genuine Innovations Airchuck for as long as I can remember. Push to inflate, really hard to screw up.
#19
climber has-been
Join Date: Dec 2004
Location: Palo Alto, CA
Posts: 7,098
Bikes: Scott Addict R1, Felt Z1
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 3422 Post(s)
Liked 3,559 Times
in
1,789 Posts
Airchuck Instructions
__________________
Ride, Rest, Repeat. ROUVY: terrymorse
Ride, Rest, Repeat. ROUVY: terrymorse
#20
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,038
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 560 Post(s)
Tagged: 2 Thread(s)
Quoted: 22583 Post(s)
Liked 8,923 Times
in
4,156 Posts
FWIW cheapest C02 is typically unthreaded (I get a box at WalMart, 15 for $7 so less than 50 cents apiece).
BUT...you will need to have an inflator that accepts unthreaded ones. Many only take threaded which are more expensive.
BUT...you will need to have an inflator that accepts unthreaded ones. Many only take threaded which are more expensive.
#21
Disco Infiltrator
Join Date: May 2013
Location: Folsom CA
Posts: 13,446
Bikes: Stormchaser, Paramount, Tilt, Samba tandem
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3126 Post(s)
Liked 2,103 Times
in
1,367 Posts
I got the Slime branded inflator at Walmart, which I recall from a prior thread also has been seen with other brand names. It holds the cartridge but also has threads so you can use either type, and it will also work with 12 gram cartridges which are not really enough gas but you can find anywhere pellet guns are sold.
I'm off of CO2 since going tubeless, though.
I'm off of CO2 since going tubeless, though.
__________________
Genesis 49:16-17
Genesis 49:16-17
#22
FLIR Kitten to 0.05C
Join Date: Sep 2014
Location: Lincoln, Nebraska
Posts: 5,331
Bikes: Roadie: Seven Axiom Race Ti w/Chorus 11s. CX/Adventure: Carver Gravel Grinder w/ Di2
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 2349 Post(s)
Liked 406 Times
in
254 Posts
On the other hand, you can get threaded 16g canisters in boxes of 2 dozen for a a dollar a cart on eBay
#23
Senior Member
Join Date: Jun 2013
Location: SW Fl.
Posts: 5,617
Bikes: Day6 Semi Recumbent "FIREBALL", 1981 Custom Touring Paramount, 1983 Road Paramount, 2013 Giant Propel Advanced SL3, 2018 Specialized Red Roubaix Expert mech., 2002 Magna 7sp hybrid, 1976 Bassett Racing 45sp Cruiser
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 1068 Post(s)
Liked 780 Times
in
502 Posts
I've been using the Genuine Innovations Airchuck for as long as I can remember. Push to inflate, really hard to screw up.
#24
Disco Infiltrator
Join Date: May 2013
Location: Folsom CA
Posts: 13,446
Bikes: Stormchaser, Paramount, Tilt, Samba tandem
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3126 Post(s)
Liked 2,103 Times
in
1,367 Posts
I am trying to think how you could even make a counterfeit CO2 cartridge. The CO2 is liquid and the pressure is its vapor pressure so you can't skimp on the steel. I guess you could make it out of more and worse steel and put in less CO2, but does that actually save you anything? Surely the biggest cost here is distribution. And it wouldn't interface with all the things that might use it. Before that, you'd have to invent and make the machine that makes the counterfeit cartridges.
__________________
Genesis 49:16-17
Genesis 49:16-17
#25
On Your Left
Join Date: Nov 2011
Location: Long Island, New York, USA
Posts: 8,373
Bikes: Trek Emonda SLR, Sram eTap, Zipp 303
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 3004 Post(s)
Liked 2,433 Times
in
1,187 Posts
I've been using the Genuine Innovations Airchuck for as long as I can remember. Push to inflate, really hard to screw up.
Last edited by GlennR; 08-06-19 at 06:55 PM.
Likes For GlennR: