Fuji New Bike Concern
#1
Junior Member
Thread Starter
Join Date: May 2014
Location: Cape Cod Ma.
Posts: 5
Bikes: Bacchetta Ti-Aero, Cannondale F400
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Fuji New Bike Concern
Just purchased a new Absolute 1.3D bike for the wife. I noticed that the larger chainring has 14 teeth either worn down or chipped. Its a Oval Concepts 520 with 50/34 T the chainring is
Opraxis Works "Leva time" its not even a month old with 50 +/- miles.
Could this be a defect that fuji is marketing ? Seems that a $ 900. bike should have a better drivetrain that stands up to regular use. Its just been used as a commuter / fitness bike so far.
the derailers are standard Tiagra 9-speed, front derailer was upgraded to Tiagra as well.
Its going back to the dealer in the morning for a checkup. What should I expect from my LBS ?
I was also considering the purchase of the 1.1D model but I see its of the same components.
Anyone have experience with this "Opraxis Leva time" chainring integrity ?
Opraxis Works "Leva time" its not even a month old with 50 +/- miles.
Could this be a defect that fuji is marketing ? Seems that a $ 900. bike should have a better drivetrain that stands up to regular use. Its just been used as a commuter / fitness bike so far.
the derailers are standard Tiagra 9-speed, front derailer was upgraded to Tiagra as well.
Its going back to the dealer in the morning for a checkup. What should I expect from my LBS ?
I was also considering the purchase of the 1.1D model but I see its of the same components.
Anyone have experience with this "Opraxis Leva time" chainring integrity ?
#3
rebmeM roineS
Join Date: Jan 2006
Location: Metro Indy, IN
Posts: 16,216
Bikes: Bacchetta Giro A20, RANS V-Rex, RANS Screamer
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 653 Post(s)
Liked 347 Times
in
226 Posts
Asymmetrical teeth on chainrings is a design feature, not a flaw, nowadays.
Read what Sheldon Brown had to say about ramped and pinned chainrings: Sheldon Brown's Bicycle Glossary Ra-Re
Read what Sheldon Brown had to say about ramped and pinned chainrings: Sheldon Brown's Bicycle Glossary Ra-Re
__________________
Bacchetta Giro A20, RANS V-Rex, RANS Screamer
Bacchetta Giro A20, RANS V-Rex, RANS Screamer
#4
Junior Member
Thread Starter
Join Date: May 2014
Location: Cape Cod Ma.
Posts: 5
Bikes: Bacchetta Ti-Aero, Cannondale F400
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
So, are these "Pins & Ramps" something that a quality chainring is sold with or is it an after market type of feature ? Its the point of the tooth that I am concerned with. After minimal use several seem warn down /chipped already.
Asymmetrical teeth on chainrings is a design feature, not a flaw, nowadays.
Read what Sheldon Brown had to say about ramped and pinned chainrings: Sheldon Brown's Bicycle Glossary Ra-Re
Read what Sheldon Brown had to say about ramped and pinned chainrings: Sheldon Brown's Bicycle Glossary Ra-Re
#6
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,689
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5772 Post(s)
Liked 2,563 Times
in
1,420 Posts
It must be a full moon out there.
Broken, chipped or worn teeth has to be the single most frequently asked new bike question. These are intentional and are there as shift gates and are the Hyper in hyper glide (unless they're the glide).
You might have other questions and the dealer is there for you, but this is one you can pass on.
Broken, chipped or worn teeth has to be the single most frequently asked new bike question. These are intentional and are there as shift gates and are the Hyper in hyper glide (unless they're the glide).
You might have other questions and the dealer is there for you, but this is one you can pass on.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#7
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
They are standard features on all good quality chainrings and have been for years. Those teeth are not "worn down/ chipped", they are shaped that way intentionally to improve shifting performance. This is truly a feature, not a bug.
#8
rebmeM roineS
Join Date: Jan 2006
Location: Metro Indy, IN
Posts: 16,216
Bikes: Bacchetta Giro A20, RANS V-Rex, RANS Screamer
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 653 Post(s)
Liked 347 Times
in
226 Posts
Oval Concepts 520 Road Bike GXP Crankset 50 34T Compact 175mm Black 765G | eBay
As AnkleWork suggested, take a look at the rings on other bikes.
__________________
Bacchetta Giro A20, RANS V-Rex, RANS Screamer
Bacchetta Giro A20, RANS V-Rex, RANS Screamer
#9
Junior Member
Thread Starter
Join Date: May 2014
Location: Cape Cod Ma.
Posts: 5
Bikes: Bacchetta Ti-Aero, Cannondale F400
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Many thanks for the insight here guys. Funny how I never have noticed this on my other bikes. Boy, I feel like the backside of a mule now. LOL New on this forum so I've got some searching & reading to do. Thanks across the board. Have a great holiday weekend to all.
#10
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,689
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5772 Post(s)
Liked 2,563 Times
in
1,420 Posts
Enjoy the bike, and don't forget to revisit the dealer in a few weeks to have it checked for minor adjustments or things that might have been missed when it was assembled.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#11
Senior Member
Asymmetrical teeth on chainrings is a design feature, not a flaw, nowadays.
Read what Sheldon Brown had to say about ramped and pinned chainrings: Sheldon Brown's Bicycle Glossary Ra-Re
Read what Sheldon Brown had to say about ramped and pinned chainrings: Sheldon Brown's Bicycle Glossary Ra-Re
#13
Senior Member
Join Date: Dec 2009
Location: Houston, TX
Posts: 28,682
Bikes: 1990 Romic Reynolds 531 custom build, Merlin Works CR Ti custom build, super light Workswell 066 custom build
Mentioned: 109 Post(s)
Tagged: 1 Thread(s)
Quoted: 6556 Post(s)
Likes: 0
Liked 58 Times
in
36 Posts
[QUOTE=FlatSix911;16788067]You cannot help the poor by destroying the rich.
You cannot strengthen the weak by weakening the strong.
You cannot bring about prosperity by discouraging thrift.
You cannot lift the wage earner up by pulling the wage payer down.
You cannot further the brotherhood of man by inciting class hatred.
[QUOTE]
I find your "signature" very interesting and actually agree with it completely. I have been seeing it posted on Bike Forums for a long time now, but despite my approval, I find it terribly incomplete. There are additional truths that need to be considered:
Helping the poor will not destroy the rich. Hoarding their riches is all that is required to destroy the rich.
Lending a hand to the weak will not weaken the strong. It is damn good exercise for both the body and the soul.
Although thrift is an important characteristic of our society, it is by consumption that our economy thrives. Like it or not, we all have to learn to deal with that sensibly.
Paying fair and respectable wages pulls no one down.
If saying what is true incites class hatred, there is something rotten in the relationship of the classes. If you want to further the brotherhood of man, it would be better to fix that than worry about what is being said.
You cannot strengthen the weak by weakening the strong.
You cannot bring about prosperity by discouraging thrift.
You cannot lift the wage earner up by pulling the wage payer down.
You cannot further the brotherhood of man by inciting class hatred.
[QUOTE]
I find your "signature" very interesting and actually agree with it completely. I have been seeing it posted on Bike Forums for a long time now, but despite my approval, I find it terribly incomplete. There are additional truths that need to be considered:
Helping the poor will not destroy the rich. Hoarding their riches is all that is required to destroy the rich.
Lending a hand to the weak will not weaken the strong. It is damn good exercise for both the body and the soul.
Although thrift is an important characteristic of our society, it is by consumption that our economy thrives. Like it or not, we all have to learn to deal with that sensibly.
Paying fair and respectable wages pulls no one down.
If saying what is true incites class hatred, there is something rotten in the relationship of the classes. If you want to further the brotherhood of man, it would be better to fix that than worry about what is being said.
#14
Senior Member
Agreed. Thank you
You cannot help the poor by destroying the rich.
You cannot strengthen the weak by weakening the strong.
You cannot bring about prosperity by discouraging thrift.
You cannot lift the wage earner up by pulling the wage payer down.
You cannot further the brotherhood of man by inciting class hatred.
You cannot strengthen the weak by weakening the strong.
You cannot bring about prosperity by discouraging thrift.
You cannot lift the wage earner up by pulling the wage payer down.
You cannot further the brotherhood of man by inciting class hatred.
I find your "signature" very interesting and actually agree with it completely.
I have been seeing it posted on Bike Forums for a long time now, but despite my approval, I find it terribly incomplete. There are additional truths that need to be considered:
Helping the poor will not destroy the rich. Hoarding their riches is all that is required to destroy the rich.
Lending a hand to the weak will not weaken the strong. It is damn good exercise for both the body and the soul.
Although thrift is an important characteristic of our society, it is by consumption that our economy thrives.
Like it or not, we all have to learn to deal with that sensibly. Paying fair and respectable wages pulls no one down.
If saying what is true incites class hatred, there is something rotten in the relationship of the classes.
If you want to further the brotherhood of man, it would be better to fix that than worry about what is being said.
I have been seeing it posted on Bike Forums for a long time now, but despite my approval, I find it terribly incomplete. There are additional truths that need to be considered:
Helping the poor will not destroy the rich. Hoarding their riches is all that is required to destroy the rich.
Lending a hand to the weak will not weaken the strong. It is damn good exercise for both the body and the soul.
Although thrift is an important characteristic of our society, it is by consumption that our economy thrives.
Like it or not, we all have to learn to deal with that sensibly. Paying fair and respectable wages pulls no one down.
If saying what is true incites class hatred, there is something rotten in the relationship of the classes.
If you want to further the brotherhood of man, it would be better to fix that than worry about what is being said.