Follis ~ bicyclette française masochiste
#76
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,038
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4511 Post(s)
Liked 6,378 Times
in
3,667 Posts
+1
Is there a specific formula in clear silicone you would recommend?
On a Viscount project, I saved the same style half hoods that looked far worse. Viscount / Lambert had their own but now curious if the MAFAC type interchange. Looked like fungus growth plus splitting. Cleaned them in bleach and then made a slurry of shoe glue clear and some sort of thinner. I don't exactly recall and was just experimenting. Probably let them sit for 6 months before installing. They turned out pretty good and so far are lasting.
Viscount bars and preserved brake 1/2 type hoods
Is there a specific formula in clear silicone you would recommend?
On a Viscount project, I saved the same style half hoods that looked far worse. Viscount / Lambert had their own but now curious if the MAFAC type interchange. Looked like fungus growth plus splitting. Cleaned them in bleach and then made a slurry of shoe glue clear and some sort of thinner. I don't exactly recall and was just experimenting. Probably let them sit for 6 months before installing. They turned out pretty good and so far are lasting.
Viscount bars and preserved brake 1/2 type hoods
#77
Banned
Thread Starter
Join Date: Aug 2013
Posts: 6,480
Mentioned: 93 Post(s)
Tagged: 0 Thread(s)
Quoted: 1361 Post(s)
Likes: 0
Liked 423 Times
in
282 Posts
Finally, a chance to ride with Pepé Le Pew. Though less than four miles and wind gust up to 40mph- (maybe more) getting blown into road traffic was enough for me.
Anyways, everything is dialed in and exceeded expectations. My fit is pretty good though a bit longer stem than I prefer, its going to work out and call it 'the French fit' thing.
The wheels roll as if on glass, but to be fair I've yet to test other road surfaces. These old Trimline tires are in excellent condition but of course this bike could benefit having new tire technology. Any chance someone may know the mfg? Panasonic National or IRC?
Bearings are fluid as my best from Campy. The Huret Duopar delivers absolute silk shifting- attempts to jamming by rapid shifting is seemingly impossible. Brakes with Kool Stops against these rims are spot on. Happy yet odd no squeaky happy sounds!
Anyways, everything is dialed in and exceeded expectations. My fit is pretty good though a bit longer stem than I prefer, its going to work out and call it 'the French fit' thing.
The wheels roll as if on glass, but to be fair I've yet to test other road surfaces. These old Trimline tires are in excellent condition but of course this bike could benefit having new tire technology. Any chance someone may know the mfg? Panasonic National or IRC?
Bearings are fluid as my best from Campy. The Huret Duopar delivers absolute silk shifting- attempts to jamming by rapid shifting is seemingly impossible. Brakes with Kool Stops against these rims are spot on. Happy yet odd no squeaky happy sounds!
Last edited by crank_addict; 03-29-20 at 08:13 PM.
#81
Banned
Thread Starter
Join Date: Aug 2013
Posts: 6,480
Mentioned: 93 Post(s)
Tagged: 0 Thread(s)
Quoted: 1361 Post(s)
Likes: 0
Liked 423 Times
in
282 Posts
A few numbers-
Weight is 25.5 lbs as depicted.
170mm crank arms
101cm wheelbase / 43cm chainstay
57cm top tube / 110mm stem
57cm seat tube
140mm headtube (end to end)
230mm Pepé Le Pew tail
Thanks for participating and seeing a rescued skunk from Skunkworks~
1903 - 2007
Weight is 25.5 lbs as depicted.
170mm crank arms
101cm wheelbase / 43cm chainstay
57cm top tube / 110mm stem
57cm seat tube
140mm headtube (end to end)
230mm Pepé Le Pew tail
Thanks for participating and seeing a rescued skunk from Skunkworks~
1903 - 2007
Last edited by crank_addict; 03-30-20 at 11:16 AM.
#82
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
That is a fine weight for a bike with "only" 3 main tubes Reynolds and a leather saddle (granted with the cut away it's on the light side for a leather saddle).
That bike looks great. Nice job.
That bike looks great. Nice job.
#83
Banned
Thread Starter
Join Date: Aug 2013
Posts: 6,480
Mentioned: 93 Post(s)
Tagged: 0 Thread(s)
Quoted: 1361 Post(s)
Likes: 0
Liked 423 Times
in
282 Posts
Saddle certainly has some heft. Its an original and survivor Brooks Swallow from 1958. Had considered using an Ideale 39 currently on another bike but this Brooks is racey for the drops and has patina to match the frame. The Swallow really isn't a cutaway and rather uses its leather as bridged and joined by rivet. Fortunately, it also has a reinforced underside. If without, this thing would be French toast. ;")
BTW: Do you still have that green Follis?
#84
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
Thank you, bikemig.
Saddle certainly has some heft. Its an original and survivor Brooks Swallow from 1958. Had considered using an Ideale 39 currently on another bike but this Brooks is racey for the drops and has patina to match the frame. The Swallow really isn't a cutaway and rather uses its leather as bridged and joined by rivet. Fortunately, it also has a reinforced underside. If without, this thing would be French toast. ;")
BTW: Do you still have that green Follis?
Saddle certainly has some heft. Its an original and survivor Brooks Swallow from 1958. Had considered using an Ideale 39 currently on another bike but this Brooks is racey for the drops and has patina to match the frame. The Swallow really isn't a cutaway and rather uses its leather as bridged and joined by rivet. Fortunately, it also has a reinforced underside. If without, this thing would be French toast. ;")
BTW: Do you still have that green Follis?
#86
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,502
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7348 Post(s)
Liked 2,465 Times
in
1,433 Posts
According to one web page I found, Trim Line tires were made by Mitsuboshi. There were three tire makers in Japan in the 70s and 80s, Panaracer (really Panasonic or National), Mitsuboshi, and IRC. Only Panaracer survived. Tires are somewhat labor intensive, so the other companies lost to cheaper labor markets. They were all extremely good. We had Mitsuboshi tires here under the name of Specialized. They were light, reliable, had a good ride, and they had an extremely low defect rate. I can't remember a single defective Mitsuboshi tire, and I've had defects in most other brands, as I have a large sample size of many of them.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#87
Banned
Thread Starter
Join Date: Aug 2013
Posts: 6,480
Mentioned: 93 Post(s)
Tagged: 0 Thread(s)
Quoted: 1361 Post(s)
Likes: 0
Liked 423 Times
in
282 Posts
^ Most resourceful and thank you!
I've long had a preference for tires with Thailand sourced raw material of natural rubber. Without cost of production/ analyzing labor and material, these Trim Line tires are (were) great under the radar flyers. Would be a hoot if that tire test website tested vintage tires. Rolling resistance etc..
Perhaps its just luck, but it's scary how beautiful this bike rolls - at least on smooth road. Wheel bearings are silky and dialed-in. Tires are icing on the cake. Cheers~
I've long had a preference for tires with Thailand sourced raw material of natural rubber. Without cost of production/ analyzing labor and material, these Trim Line tires are (were) great under the radar flyers. Would be a hoot if that tire test website tested vintage tires. Rolling resistance etc..
Perhaps its just luck, but it's scary how beautiful this bike rolls - at least on smooth road. Wheel bearings are silky and dialed-in. Tires are icing on the cake. Cheers~
#88
It's the little things
Join Date: Jan 2016
Location: Chicagoland
Posts: 781
Bikes: Too many, yet not enough
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 279 Post(s)
Liked 326 Times
in
147 Posts
Beautiful build as always Scott! Weight is good too. Clean and great conceptually. Glad it performs nicely!